[U-Boot] [PATCH 2/2] rockchip: dts: tinker: Add tinker-s board support

Kever Yang kever.yang at rock-chips.com
Sun Nov 10 14:36:46 UTC 2019


On 2019/11/10 下午8:57, Michael Trimarchi wrote:
> Support tinker-s board. The board is equivalent of tinker board
> except of emmc.
>
> TODO:
> - support of usb current burst when the board is powered from pc
>
> Signed-off-by: Michael Trimarchi <michael at amarulasolutions.com>

Reviewed-by: Kever Yang <kever.yang at rock-chips.com>

Thanks,
- Kever
> ---
> Changes:
> 	v2->v3: drop dmc section
> 	v1->v2: Add boot configuration for emmc
> ---
>   arch/arm/dts/Makefile                    |  1 +
>   arch/arm/dts/rk3288-tinker-s-u-boot.dtsi | 34 ++++++++
>   arch/arm/dts/rk3288-tinker-s.dts         | 29 +++++++
>   configs/tinker-s-rk3288_defconfig        | 99 ++++++++++++++++++++++++
>   include/configs/tinker_rk3288.h          |  1 +
>   5 files changed, 164 insertions(+)
>   create mode 100644 arch/arm/dts/rk3288-tinker-s-u-boot.dtsi
>   create mode 100644 arch/arm/dts/rk3288-tinker-s.dts
>   create mode 100644 configs/tinker-s-rk3288_defconfig
>
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index 89ab8001ce..7e9d6809ea 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -87,6 +87,7 @@ dtb-$(CONFIG_ROCKCHIP_RK3288) += \
>   	rk3288-popmetal.dtb \
>   	rk3288-rock2-square.dtb \
>   	rk3288-tinker.dtb \
> +	rk3288-tinker-s.dtb \
>   	rk3288-veyron-jerry.dtb \
>   	rk3288-veyron-mickey.dtb \
>   	rk3288-veyron-minnie.dtb \
> diff --git a/arch/arm/dts/rk3288-tinker-s-u-boot.dtsi b/arch/arm/dts/rk3288-tinker-s-u-boot.dtsi
> new file mode 100644
> index 0000000000..a177fca73a
> --- /dev/null
> +++ b/arch/arm/dts/rk3288-tinker-s-u-boot.dtsi
> @@ -0,0 +1,34 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (C) 2019 Amarula Solutions SRO
> + */
> +
> +#include "rk3288-u-boot.dtsi"
> +#include "rk3288-tinker-u-boot.dtsi"
> +
> +/ {
> +	chosen {
> +		u-boot,spl-boot-order = \
> +			"same-as-spl", &sdmmc, &emmc;
> +	};
> +};
> +
> +&emmc {
> +	u-boot,dm-spl;
> +};
> +
> +&emmc_clk {
> +	u-boot,dm-spl;
> +};
> +
> +&emmc_cmd {
> +	u-boot,dm-spl;
> +};
> +
> +&emmc_pwr {
> +	u-boot,dm-spl;
> +};
> +
> +&emmc_bus8 {
> +	u-boot,dm-spl;
> +};
> diff --git a/arch/arm/dts/rk3288-tinker-s.dts b/arch/arm/dts/rk3288-tinker-s.dts
> new file mode 100644
> index 0000000000..cc7ac5f881
> --- /dev/null
> +++ b/arch/arm/dts/rk3288-tinker-s.dts
> @@ -0,0 +1,29 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
> + */
> +
> +/dts-v1/;
> +
> +#include "rk3288-tinker.dtsi"
> +
> +/ {
> +	model = "Rockchip RK3288 Asus Tinker Board S";
> +	compatible = "asus,rk3288-tinker-s", "rockchip,rk3288";
> +
> +	chosen {
> +		stdout-path = &uart2;
> +	};
> +};
> +
> +&emmc {
> +	bus-width = <8>;
> +	cap-mmc-highspeed;
> +	non-removable;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>;
> +	max-frequency = <150000000>;
> +	mmc-hs200-1_8v;
> +	mmc-ddr-1_8v;
> +	status = "okay";
> +};
> diff --git a/configs/tinker-s-rk3288_defconfig b/configs/tinker-s-rk3288_defconfig
> new file mode 100644
> index 0000000000..c851a93f31
> --- /dev/null
> +++ b/configs/tinker-s-rk3288_defconfig
> @@ -0,0 +1,99 @@
> +CONFIG_ARM=y
> +CONFIG_ARCH_ROCKCHIP=y
> +CONFIG_SYS_TEXT_BASE=0x01000000
> +CONFIG_SPL_GPIO_SUPPORT=y
> +CONFIG_ROCKCHIP_RK3288=y
> +CONFIG_TARGET_TINKER_RK3288=y
> +CONFIG_NR_DRAM_BANKS=1
> +CONFIG_SPL_SIZE_LIMIT=307200
> +CONFIG_SPL_STACK_R_ADDR=0x800000
> +CONFIG_DEBUG_UART_BASE=0xff690000
> +CONFIG_DEBUG_UART_CLOCK=24000000
> +CONFIG_DEBUG_UART=y
> +CONFIG_TPL_SYS_MALLOC_F_LEN=0x4000
> +CONFIG_SPL_SYS_MALLOC_F_LEN=0x4000
> +CONFIG_SYS_MALLOC_F_LEN=0x4000
> +# CONFIG_ANDROID_BOOT_IMAGE is not set
> +CONFIG_USE_PREBOOT=y
> +CONFIG_SILENT_CONSOLE=y
> +CONFIG_CONSOLE_MUX=y
> +CONFIG_DEFAULT_FDT_FILE="rk3288-tinker-s.dtb"
> +# CONFIG_DISPLAY_CPUINFO is not set
> +CONFIG_DISPLAY_BOARDINFO_LATE=y
> +CONFIG_SPL_STACK_R=y
> +CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x300000
> +CONFIG_SPL_I2C_SUPPORT=y
> +CONFIG_SPL_POWER_SUPPORT=y
> +CONFIG_CMD_GPIO=y
> +CONFIG_CMD_GPT=y
> +CONFIG_CMD_I2C=y
> +CONFIG_CMD_MMC=y
> +CONFIG_CMD_SF=y
> +CONFIG_CMD_SPI=y
> +CONFIG_CMD_USB=y
> +CONFIG_CMD_USB_MASS_STORAGE=y
> +# CONFIG_CMD_SETEXPR is not set
> +CONFIG_CMD_BMP=y
> +CONFIG_CMD_CACHE=y
> +CONFIG_CMD_TIME=y
> +CONFIG_CMD_PMIC=y
> +CONFIG_CMD_REGULATOR=y
> +# CONFIG_SPL_DOS_PARTITION is not set
> +# CONFIG_SPL_EFI_PARTITION is not set
> +CONFIG_SPL_PARTITION_UUIDS=y
> +CONFIG_SPL_OF_CONTROL=y
> +CONFIG_DEFAULT_DEVICE_TREE="rk3288-tinker-s"
> +CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
> +CONFIG_ENV_IS_IN_MMC=y
> +CONFIG_REGMAP=y
> +CONFIG_SPL_REGMAP=y
> +CONFIG_SYSCON=y
> +CONFIG_SPL_SYSCON=y
> +# CONFIG_SPL_SIMPLE_BUS is not set
> +CONFIG_CLK=y
> +CONFIG_SPL_CLK=y
> +CONFIG_FASTBOOT_FLASH=y
> +CONFIG_FASTBOOT_FLASH_MMC_DEV=0
> +CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
> +CONFIG_ROCKCHIP_GPIO=y
> +CONFIG_SYS_I2C_ROCKCHIP=y
> +CONFIG_MISC=y
> +CONFIG_I2C_EEPROM=y
> +CONFIG_MMC_DW=y
> +CONFIG_MMC_DW_ROCKCHIP=y
> +CONFIG_SPI_FLASH=y
> +CONFIG_SF_DEFAULT_SPEED=20000000
> +CONFIG_DM_ETH=y
> +CONFIG_ETH_DESIGNWARE=y
> +CONFIG_GMAC_ROCKCHIP=y
> +CONFIG_PINCTRL=y
> +CONFIG_SPL_PINCTRL=y
> +CONFIG_DM_PMIC=y
> +CONFIG_PMIC_RK8XX=y
> +CONFIG_SPL_DM_REGULATOR=y
> +CONFIG_DM_REGULATOR_FIXED=y
> +CONFIG_SPL_DM_REGULATOR_FIXED=y
> +CONFIG_REGULATOR_RK8XX=y
> +CONFIG_PWM_ROCKCHIP=y
> +CONFIG_RAM=y
> +CONFIG_SPL_RAM=y
> +CONFIG_DEBUG_UART_SHIFT=2
> +CONFIG_SYSRESET=y
> +CONFIG_USB=y
> +CONFIG_USB_DWC2=y
> +CONFIG_ROCKCHIP_USB2_PHY=y
> +CONFIG_USB_GADGET=y
> +CONFIG_USB_GADGET_MANUFACTURER="Rockchip"
> +CONFIG_USB_GADGET_VENDOR_NUM=0x2207
> +CONFIG_USB_GADGET_PRODUCT_NUM=0x320a
> +CONFIG_USB_GADGET_DWC2_OTG=y
> +CONFIG_USB_HOST_ETHER=y
> +CONFIG_USB_ETHER_ASIX=y
> +CONFIG_USB_ETHER_SMSC95XX=y
> +CONFIG_CMD_DHRYSTONE=y
> +CONFIG_ERRNO_STR=y
> +CONFIG_DM_VIDEO=y
> +CONFIG_DISPLAY=y
> +CONFIG_VIDEO_ROCKCHIP=y
> +CONFIG_DISPLAY_ROCKCHIP_HDMI=y
> +CONFIG_CONSOLE_SCROLL_LINES=10
> diff --git a/include/configs/tinker_rk3288.h b/include/configs/tinker_rk3288.h
> index 5adae68c91..f8a55a2cec 100644
> --- a/include/configs/tinker_rk3288.h
> +++ b/include/configs/tinker_rk3288.h
> @@ -12,6 +12,7 @@
>   #undef BOOT_TARGET_DEVICES
>   
>   #define BOOT_TARGET_DEVICES(func) \
> +	func(MMC, mmc, 0) \
>   	func(MMC, mmc, 1) \
>   	func(USB, usb, 0) \
>   	func(PXE, pxe, na) \




More information about the U-Boot mailing list