[U-Boot] [v2] include/configs: ls1012a: add pfe stop command

[Biwen Li]

> -----Original Message-----
> From: Priyanka Jain <priyanka.jain at nxp.com>
> Sent: 2019年11月15日 12:57
> To: Biwen Li <biwen.li at nxp.com>; Shengzhou Liu <shengzhou.liu at nxp.com>;
> Alison Wang <alison.wang at nxp.com>; Jagdish Gediya
> <jagdish.gediya at nxp.com>; Rajesh Bhagat <rajesh.bhagat at nxp.com>
> Cc: Jiafei Pan <jiafei.pan at nxp.com>; Xiaobo Xie <xiaobo.xie at nxp.com>;
> u-boot at lists.denx.de; Biwen Li <biwen.li at nxp.com>
> Subject: RE: [v2] include/configs: ls1012a: add pfe stop command
> 
> 
> 
> >-----Original Message-----
> >From: Biwen Li <biwen.li at nxp.com>
> >Sent: Thursday, November 14, 2019 10:15 AM
> >To: Shengzhou Liu <shengzhou.liu at nxp.com>; Alison Wang
> ><alison.wang at nxp.com>; Jagdish Gediya <jagdish.gediya at nxp.com>; Rajesh
> >Bhagat <rajesh.bhagat at nxp.com>; Priyanka Jain <priyanka.jain at nxp.com>
> >Cc: Jiafei Pan <jiafei.pan at nxp.com>; Xiaobo Xie <xiaobo.xie at nxp.com>;
> >u- boot at lists.denx.de; Biwen Li <biwen.li at nxp.com>
> >Subject: [v2] include/configs: ls1012a: add pfe stop command
> >
> >This adds pfe stop command before enter linux kernel to fix a problem
> >that ethernet won't be workable after enter linux
> >
> >Why need execute the command before enter linux kernel?
> No need to add question. The description needs to be in passive voice.
> Add something like. 'pfe stop' command is required because
Okay, will be update in v3.
> >- There is a h/w limitation in LS1012A PFE,  to
> >  re-initialize PFE it has to be safe shutdown,
> >  these steps are done through PFE stop.
> >
> >Signed-off-by: Biwen Li <biwen.li at nxp.com>
> >---
> >Changes in v2:
> >	- trim subject
> >	- add why
> >
> <snip>
> -priyankajain