[U-Boot] [PATCH v2 3/5] imx: nandbcb: add support for i.MX7
Stefano Babic
sbabic at denx.de
Sun Nov 3 13:55:51 UTC 2019
Hi Igor,
On 21/10/19 15:38, Igor Opaniuk wrote:
> From: Igor Opaniuk <igor.opaniuk at toradex.com>
>
> Add support for updating FCB/DBBT on i.MX7:
> - additional new fields in FCB structure
> - Leverage hardware BCH/randomizer for writing FCB
>
> Signed-off-by: Igor Opaniuk <igor.opaniuk at toradex.com>
> ---
>
Patch conflicts with the one for i.MX6UL, that I have currently applied
(you see it on -next branch). Could you please rebase on it and resend ?
Thanks !
Regards,
Stefano
> arch/arm/include/asm/mach-imx/imx-nandbcb.h | 12 ++
> arch/arm/mach-imx/Kconfig | 2 +-
> arch/arm/mach-imx/cmd_nandbcb.c | 129 +++++++++++++-------
> 3 files changed, 100 insertions(+), 43 deletions(-)
>
> diff --git a/arch/arm/include/asm/mach-imx/imx-nandbcb.h b/arch/arm/include/asm/mach-imx/imx-nandbcb.h
> index 033659a038..907e7ed8f9 100644
> --- a/arch/arm/include/asm/mach-imx/imx-nandbcb.h
> +++ b/arch/arm/include/asm/mach-imx/imx-nandbcb.h
> @@ -106,6 +106,18 @@ struct fcb_block {
>
> /* The swap position of main area in spare area */
> u32 spare_offset;
> +
> + /* Actual for iMX7 only */
> + u32 onfi_sync_enable;
> + u32 onfi_sync_speed;
> + u32 onfi_sync_nand_data;
> + u32 reserved2[6];
> + u32 disbbm_search;
> + u32 disbbm_search_limit;
> + u32 reserved3[15];
> + u32 read_retry_enable;
> + u32 reserved4[1];
> + u32 fill_to_1024[183];
> };
>
> #endif /* _IMX_NAND_BCB_H_ */
> diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
> index b0b9d2c070..c22e8f51b4 100644
> --- a/arch/arm/mach-imx/Kconfig
> +++ b/arch/arm/mach-imx/Kconfig
> @@ -81,7 +81,7 @@ config CMD_HDMIDETECT
> config CMD_NANDBCB
> bool "i.MX6 NAND Boot Control Block(BCB) command"
> depends on NAND && CMD_MTDPARTS
> - default y if ARCH_MX6 && NAND_MXS
> + default y if (ARCH_MX6 && NAND_MXS) || (ARCH_MX7 && NAND_MXS)
> help
> Unlike normal 'nand write/erase' commands, this command update
> Boot Control Block(BCB) for i.MX6 platform NAND IP's.
> diff --git a/arch/arm/mach-imx/cmd_nandbcb.c b/arch/arm/mach-imx/cmd_nandbcb.c
> index 7811c61d22..aae2cc82f3 100644
> --- a/arch/arm/mach-imx/cmd_nandbcb.c
> +++ b/arch/arm/mach-imx/cmd_nandbcb.c
> @@ -16,6 +16,7 @@
> #include <jffs2/jffs2.h>
> #include <linux/mtd/mtd.h>
>
> +#include <asm/arch/sys_proto.h>
> #include <asm/mach-imx/imx-nandbcb.h>
> #include <asm/mach-imx/imximage.cfg>
> #include <mxs_nand.h>
> @@ -67,26 +68,36 @@ static void fill_fcb(struct fcb_block *fcb, struct mtd_info *mtd)
> {
> struct nand_chip *chip = mtd_to_nand(mtd);
> struct mxs_nand_info *nand_info = nand_get_controller_data(chip);
> + struct mxs_nand_layout l;
> +
> + mxs_nand_get_layout(mtd, &l);
>
> fcb->fingerprint = FCB_FINGERPRINT;
> fcb->version = FCB_VERSION_1;
> +
> fcb->pagesize = mtd->writesize;
> fcb->oob_pagesize = mtd->writesize + mtd->oobsize;
> fcb->sectors = mtd->erasesize / mtd->writesize;
>
> - /* Divide ECC strength by two and save the value into FCB structure. */
> - fcb->ecc_level = nand_info->bch_geometry.ecc_strength >> 1;
> -
> - fcb->ecc_type = fcb->ecc_level;
> + fcb->meta_size = l.meta_size;
> + fcb->nr_blocks = l.nblocks;
> + fcb->ecc_nr = l.data0_size;
> + fcb->ecc_level = l.ecc0;
> + fcb->ecc_size = l.datan_size;
> + fcb->ecc_type = l.eccn;
>
> /* Also hardcoded in kobs-ng */
> - fcb->ecc_nr = 0x00000200;
> - fcb->ecc_size = 0x00000200;
> - fcb->datasetup = 80;
> - fcb->datahold = 60;
> - fcb->addr_setup = 25;
> - fcb->dsample_time = 6;
> - fcb->meta_size = 10;
> + if (is_mx6()) {
> + fcb->datasetup = 80;
> + fcb->datahold = 60;
> + fcb->addr_setup = 25;
> + fcb->dsample_time = 6;
> + } else if (is_mx7()) {
> + fcb->datasetup = 10;
> + fcb->datahold = 7;
> + fcb->addr_setup = 15;
> + fcb->dsample_time = 6;
> + }
>
> /* DBBT search area starts at second page on first block */
> fcb->dbbt_start = 1;
> @@ -98,6 +109,9 @@ static void fill_fcb(struct fcb_block *fcb, struct mtd_info *mtd)
>
> fcb->nr_blocks = mtd->writesize / fcb->ecc_nr - 1;
>
> + fcb->disbbm = 0;
> + fcb->disbbm_search = 0;
> +
> fcb->checksum = calc_chksum((void *)fcb + 4, sizeof(*fcb) - 4);
> }
>
> @@ -133,6 +147,7 @@ static int nandbcb_update(struct mtd_info *mtd, loff_t off, size_t size,
> size_t fwsize, dummy;
> int i, ret;
>
> + fcb_raw_page = 0;
> /* erase */
> memset(&opts, 0, sizeof(opts));
> opts.offset = off;
> @@ -223,45 +238,74 @@ static int nandbcb_update(struct mtd_info *mtd, loff_t off, size_t size,
> else if (ret > 0)
> dbbt->dbbtpages = 1;
>
> - /* write fcb/dbbt */
> - fcb_raw_page = kzalloc(mtd->writesize + mtd->oobsize, GFP_KERNEL);
> - if (!fcb_raw_page) {
> - debug("failed to allocate fcb_raw_page\n");
> - ret = -ENOMEM;
> - goto dbbt_data_page_err;
> - }
> -
> - memcpy(fcb_raw_page + 12, fcb, sizeof(struct fcb_block));
> - encode_hamming_13_8(fcb_raw_page + 12, fcb_raw_page + 12 + 512, 512);
> /*
> - * Set the first and second byte of OOB data to 0xFF, not 0x00. These
> - * bytes are used as the Manufacturers Bad Block Marker (MBBM). Since
> - * the FCB is mostly written to the first page in a block, a scan for
> - * factory bad blocks will detect these blocks as bad, e.g. when
> - * function nand_scan_bbt() is executed to build a new bad block table.
> + * We prepare raw page only for i.MX6, for i.MX7 we
> + * leverage BCH hw module instead
> */
> - memset(fcb_raw_page + mtd->writesize, 0xFF, 2);
> + if (is_mx6()) {
> + /* write fcb/dbbt */
> + fcb_raw_page = kzalloc(mtd->writesize + mtd->oobsize,
> + GFP_KERNEL);
> + if (!fcb_raw_page) {
> + debug("failed to allocate fcb_raw_page\n");
> + ret = -ENOMEM;
> + goto dbbt_data_page_err;
> + }
>
> + memcpy(fcb_raw_page + 12, fcb, sizeof(struct fcb_block));
> + encode_hamming_13_8(fcb_raw_page + 12, fcb_raw_page +
> + 12 + 512, 512);
> + /*
> + * Set the first and second byte of OOB data to 0xFF,
> + * not 0x00. These bytes are used as the Manufacturers Bad
> + * Block Marker (MBBM). Since the FCB is mostly written to
> + * the first page in a block, a scan for
> + * factory bad blocks will detect these blocks as bad, e.g.
> + * when function nand_scan_bbt() is executed to build a new
> + * bad block table.
> + */
> + memset(fcb_raw_page + mtd->writesize, 0xFF, 2);
> + }
> for (i = 0; i < nr_blks_fcb; i++) {
> if (mtd_block_isbad(mtd, off)) {
> printf("Block %d is bad, skipped\n", i);
> continue;
> }
>
> - /* raw write */
> - mtd_oob_ops_t ops = {
> - .datbuf = (u8 *)fcb_raw_page,
> - .oobbuf = ((u8 *)fcb_raw_page) + mtd->writesize,
> - .len = mtd->writesize,
> - .ooblen = mtd->oobsize,
> - .mode = MTD_OPS_RAW
> - };
> -
> - ret = mtd_write_oob(mtd, mtd->erasesize * i, &ops);
> - if (ret)
> - goto fcb_raw_page_err;
> - debug("NAND fcb write: 0x%x offset, 0x%x bytes written: %s\n",
> - mtd->erasesize * i, ops.len, ret ? "ERROR" : "OK");
> + /*
> + * User BCH ECC hardware module for i.MX7
> + */
> + if (is_mx7()) {
> + u32 off = i * mtd->erasesize;
> + size_t rwsize = sizeof(*fcb);
> +
> + printf("Writing %d bytes to 0x%x: ", rwsize, off);
> +
> + /* switch nand BCH to FCB compatible settings */
> + mxs_nand_mode_fcb(mtd);
> + ret = nand_write(mtd, off, &rwsize,
> + (unsigned char *)fcb);
> + mxs_nand_mode_normal(mtd);
> +
> + printf("%s\n", ret ? "ERROR" : "OK");
> + } else if (is_mx6()) {
> + /* raw write */
> + mtd_oob_ops_t ops = {
> + .datbuf = (u8 *)fcb_raw_page,
> + .oobbuf = ((u8 *)fcb_raw_page) +
> + mtd->writesize,
> + .len = mtd->writesize,
> + .ooblen = mtd->oobsize,
> + .mode = MTD_OPS_RAW
> + };
> +
> + ret = mtd_write_oob(mtd, mtd->erasesize * i, &ops);
> + if (ret)
> + goto fcb_raw_page_err;
> + debug("NAND fcb write: 0x%x offset 0x%x written: %s\n",
> + mtd->erasesize * i, ops.len, ret ?
> + "ERROR" : "OK");
> + }
>
> ret = mtd_write(mtd, mtd->erasesize * i + mtd->writesize,
> mtd->writesize, &dummy, dbbt_page);
> @@ -283,7 +327,8 @@ static int nandbcb_update(struct mtd_info *mtd, loff_t off, size_t size,
> }
>
> fcb_raw_page_err:
> - kfree(fcb_raw_page);
> + if (is_mx6())
> + kfree(fcb_raw_page);
> dbbt_data_page_err:
> kfree(dbbt_data_page);
> dbbt_page_err:
>
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
More information about the U-Boot
mailing list