[U-Boot] [PATCH 1/4] ppc/km/tegr1: support second localbus clock signal

[Holger Brunck]

On kmtegr1 we have to specify the second localbus clock signal also
instead of using the default for our ppc 8309 boards.

Signed-off-by: Holger Brunck <holger.brunck at ch.abb.com>
CC: Priyanka Jain <priyanka.jain at nxp.com>
CC: Valentin Longchamp <valentin.longchamp at ch.abb.com>
---
 include/configs/km/km-mpc8309.h |  2 ++
 include/configs/kmtegr1.h       | 17 +++++++++++++++++
 2 files changed, 19 insertions(+)

diff --git a/include/configs/km/km-mpc8309.h b/include/configs/km/km-mpc8309.h
index 9aaea273e0..e710c04493 100644
--- a/include/configs/km/km-mpc8309.h
+++ b/include/configs/km/km-mpc8309.h
@@ -22,6 +22,7 @@
  * System IO Config
  */
 /* 0x14000180 SICR_1 */
+#ifndef CONFIG_SYS_SICRL
 #define CONFIG_SYS_SICRL (0			\
 		| SICR_1_UART1_UART1RTS		\
 		| SICR_1_I2C_CKSTOP		\
@@ -38,6 +39,7 @@
 		| SICR_1_FEC1_FEC1		\
 		| SICR_1_FEC2_FEC2		\
 		)
+#endif
 
 /* 0x00080400 SICR_2 */
 #define CONFIG_SYS_SICRH (0			\
diff --git a/include/configs/kmtegr1.h b/include/configs/kmtegr1.h
index e627606222..a441fca121 100644
--- a/include/configs/kmtegr1.h
+++ b/include/configs/kmtegr1.h
@@ -30,6 +30,23 @@
 #define CONFIG_SYS_MAX_NAND_DEVICE		1
 #define NAND_MAX_CHIPS				1
 
+#define CONFIG_SYS_SICRL (0     \
+		| SICR_1_UART1_UART1RTS   \
+		| SICR_1_I2C_CKSTOP   \
+		| SICR_1_IRQ_A_IRQ    \
+		| SICR_1_IRQ_B_IRQ    \
+		| SICR_1_GPIO_A_GPIO    \
+		| SICR_1_GPIO_B_GPIO    \
+		| SICR_1_GPIO_C_GPIO    \
+		| SICR_1_GPIO_D_GPIO    \
+		| SICR_1_GPIO_E_LCS    \
+		| SICR_1_GPIO_F_GPIO    \
+		| SICR_1_USB_A_UART2S   \
+		| SICR_1_USB_B_UART2RTS   \
+		| SICR_1_FEC1_FEC1    \
+		| SICR_1_FEC2_FEC2    \
+	)
+
 /* include common defines/options for all Keymile boards */
 #include "km/keymile-common.h"
 #include "km/km-powerpc.h"
-- 
2.24.0.rc1