[U-Boot] [PATCH v3] Add TFA secure boot defconfig and Enables secure boot related configs in it.

[Priyanka Jain]

>-----Original Message-----
>From: Udit Agarwal <udit.agarwal at nxp.com>
>Sent: Wednesday, November 20, 2019 11:46 AM
>To: u-boot at lists.denx.de
>Cc: Priyanka Jain <priyanka.jain at nxp.com>; Arun Pathak
><arun.pathak at nxp.com>; Ruchika Gupta <ruchika.gupta at nxp.com>; Udit
>Agarwal <udit.agarwal at nxp.com>
>Subject: [PATCH v3] Add TFA secure boot defconfig and Enables secure boot
>related configs in it.
Trim subject to fit in 60  characters.
Current information is vague
Mention which config is being added in subject/description.

>
>Signed-off-by: Udit Agarwal <udit.agarwal at nxp.com>
>---
>Changes in V3:
>Corrects commit message and resends patch.
>
> configs/ls1046afrwy_tfa_SECURE_BOOT_defconfig | 57 +++++++++++++++++++
> 1 file changed, 57 insertions(+)
> create mode 100644 configs/ls1046afrwy_tfa_SECURE_BOOT_defconfig
>
>diff --git a/configs/ls1046afrwy_tfa_SECURE_BOOT_defconfig
>b/configs/ls1046afrwy_tfa_SECURE_BOOT_defconfig
>new file mode 100644
>index 0000000000..aa293302f5
>--- /dev/null
>+++ b/configs/ls1046afrwy_tfa_SECURE_BOOT_defconfig
>@@ -0,0 +1,57 @@
>+CONFIG_ARM=y
>+CONFIG_TARGET_LS1046AFRWY=y
>+CONFIG_TFABOOT=y
>+CONFIG_SYS_TEXT_BASE=0x82000000
>+CONFIG_SECURE_BOOT=y
>+CONFIG_QSPI_AHB_INIT=y
>+CONFIG_NR_DRAM_BANKS=2
>+CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
>+CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
>+CONFIG_AHCI=y
>+CONFIG_DISTRO_DEFAULTS=y
>+CONFIG_FIT_VERBOSE=y
>+CONFIG_OF_BOARD_SETUP=y
>+CONFIG_USE_BOOTARGS=y
>+CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0
>earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.spi:1m(rcw),15m(u-
>boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),44
>8m(nand_free)"
>+CONFIG_MISC_INIT_R=y
>+CONFIG_CMD_GPT=y
>+CONFIG_CMD_I2C=y
>+CONFIG_CMD_MMC=y
>+CONFIG_CMD_NAND=y
>+CONFIG_CMD_PCI=y
>+CONFIG_CMD_SF=y
>+CONFIG_CMD_USB=y
>+CONFIG_CMD_CACHE=y
>+CONFIG_MP=y
>+CONFIG_MTDPARTS_DEFAULT="mtdparts=1550000.spi:1m(rcw),15m(u-
>boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),44
>8m(nand_free)"
>+CONFIG_OF_CONTROL=y
>+CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-frwy"
>+CONFIG_ENV_IS_NOWHERE=y
>+CONFIG_DM=y
>+CONFIG_SATA_CEVA=y
>+CONFIG_FSL_CAAM=y
>+CONFIG_DM_MMC=y
>+CONFIG_FSL_ESDHC=y
>+CONFIG_SPI_FLASH=y
>+# CONFIG_SPI_FLASH_BAR is not set
>+CONFIG_SPI_FLASH_STMICRO=y
>+# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set CONFIG_PHYLIB=y
>+CONFIG_PHY_VITESSE=y CONFIG_PHY_GIGE=y CONFIG_E1000=y
>CONFIG_PCI=y
>+CONFIG_DM_PCI=y CONFIG_DM_PCI_COMPAT=y
>CONFIG_PCIE_LAYERSCAPE=y
>+CONFIG_DM_SCSI=y CONFIG_SYS_NS16550=y CONFIG_SPI=y
>CONFIG_DM_SPI=y
>+CONFIG_FSL_QSPI=y CONFIG_USB=y CONFIG_DM_USB=y
>CONFIG_USB_XHCI_HCD=y
>+CONFIG_USB_XHCI_DWC3=y CONFIG_RSA=y CONFIG_CMD_SETEXPR=y
>--
>2.17.1
-priyankajain