[U-Boot] [PATCH v2 2/4] arm: sunxi: add a config option to fixup a Bluetooth address

Ondřej Jirman megous at megous.com
Tue Nov 26 10:50:36 UTC 2019


On Tue, Nov 26, 2019 at 11:46:33AM +0100, megous hlavni wrote:
> Hello Andre,
> 
> On Tue, Nov 26, 2019 at 09:16:00AM +0100, Andre Heider wrote:
> > Some Bluetooth controllers, like the BCM4345C5 of the Orange Pi 3,
> > ship with the controller default address.
> > 
> > Add a config option to fix it up so it can function properly.
> 
> I tried it on TBS A711 tablet that also has bluetooth, but that doesn't have
> ethernet (ethernet alias is not set up) so no ethaddr gets generated and
> bdaddr setting fails due to dependency on ethernet alias being present.
> 
> So for this mechanism to be more universal, sid->mac_addr code probably
> needs to be moved to it's own function, and used both from setup_environment
> and fixup_bd_address, to avoid dependency on boards having ethernet.

Or even simpler, just move the fixup_bd_address() code to setup_environment()

regards,
	o.

> Otherwise, on Orange Pi 3:
> 
> Tested-by: Ondrej Jirman <megous at megous.com>
> 
> Also see the comment below:
> 
> > Signed-off-by: Andre Heider <a.heider at gmail.com>
> > ---
> >  arch/arm/mach-sunxi/Kconfig | 12 ++++++++++++
> >  board/sunxi/board.c         | 30 ++++++++++++++++++++++++++++++
> >  2 files changed, 42 insertions(+)
> > 
> > diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
> > index 16d41b83af..b41c64870e 100644
> > --- a/arch/arm/mach-sunxi/Kconfig
> > +++ b/arch/arm/mach-sunxi/Kconfig
> > @@ -1009,4 +1009,16 @@ config PINE64_DT_SELECTION
> >  	  option, the device tree selection code specific to Pine64 which
> >  	  utilizes the DRAM size will be enabled.
> >  
> > +config FIXUP_BDADDR
> > +	string "Fixup the Bluetooth controller address"
> > +	depends on MACH_SUN50I_H6
> 
> ^ This should be more sunxi generic or perhaps just removed, because the code is
> not specific to H6.
> 
> thank you and regards,
> 	o.
> 
> > +	default ""
> > +	help
> > +	  This option specifies the DT compatible name of the Bluetooth
> > +	  controller for which to set the "local-bd-address" property.
> > +	  Set this option if your device ships with the Bluetooth controller
> > +	  default address.
> > +	  The used address is "bdaddr" if set, and "ethaddr" with the LSB
> > +	  flipped elsewise.
> > +
> >  endif
> > diff --git a/board/sunxi/board.c b/board/sunxi/board.c
> > index bb35d6b66e..89851102d1 100644
> > --- a/board/sunxi/board.c
> > +++ b/board/sunxi/board.c
> > @@ -856,6 +856,34 @@ int misc_init_r(void)
> >  	return 0;
> >  }
> >  
> > +static void fixup_bd_address(void *blob)
> > +{
> > +#ifdef CONFIG_FIXUP_BDADDR
> > +	/* Some devices ship with a Bluetooth controller default address.
> > +	 * Set a valid address through the device tree.
> > +	 */
> > +	uchar tmp[ETH_ALEN], bdaddr[ETH_ALEN];
> > +	int i;
> > +
> > +	if (strlen(CONFIG_FIXUP_BDADDR) < 1)
> > +		return;
> > +
> > +	if (!eth_env_get_enetaddr("bdaddr", tmp)) {
> > +		if (!eth_env_get_enetaddr("ethaddr", tmp))
> > +			return;
> > +
> > +		tmp[ETH_ALEN - 1] ^= 1;
> > +	}
> > +
> > +	/* Addresses need to be in the binary format of the corresponding stack */
> > +	for (i = 0; i < ETH_ALEN; ++i)
> > +		bdaddr[i] = tmp[ETH_ALEN - i - 1];
> > +
> > +	do_fixup_by_compat(blob, CONFIG_FIXUP_BDADDR,
> > +			   "local-bd-address", bdaddr, ETH_ALEN, 1);
> > +#endif
> > +}
> > +
> >  int ft_board_setup(void *blob, bd_t *bd)
> >  {
> >  	int __maybe_unused r;
> > @@ -866,6 +894,8 @@ int ft_board_setup(void *blob, bd_t *bd)
> >  	 */
> >  	setup_environment(blob);
> >  
> > +	fixup_bd_address(blob);
> > +
> >  #ifdef CONFIG_VIDEO_DT_SIMPLEFB
> >  	r = sunxi_simplefb_setup(blob);
> >  	if (r)
> > -- 
> > 2.24.0
> > 


More information about the U-Boot mailing list