[U-Boot] [PATCH 2/2] rockchip: dts: tinker: Add tinker-s board support
Michael Nazzareno Trimarchi
michael at amarulasolutions.com
Fri Nov 15 07:15:29 UTC 2019
Hi Kever
On Fri, Nov 15, 2019 at 8:02 AM Kever Yang <kever.yang at rock-chips.com> wrote:
>
> Hi Michael,
>
> Could send a patch to add maintainer for Tinker-s board?
>
> The board maintainer is needed and other patches are ready to merge.
>
I going to send it today
Michael
> Thanks,
>
> - Kever
>
> On 2019/11/10 下午8:57, Michael Trimarchi wrote:
> > Support tinker-s board. The board is equivalent of tinker board
> > except of emmc.
> >
> > TODO:
> > - support of usb current burst when the board is powered from pc
> >
> > Signed-off-by: Michael Trimarchi <michael at amarulasolutions.com>
> > ---
> > Changes:
> > v2->v3: drop dmc section
> > v1->v2: Add boot configuration for emmc
> > ---
> > arch/arm/dts/Makefile | 1 +
> > arch/arm/dts/rk3288-tinker-s-u-boot.dtsi | 34 ++++++++
> > arch/arm/dts/rk3288-tinker-s.dts | 29 +++++++
> > configs/tinker-s-rk3288_defconfig | 99 ++++++++++++++++++++++++
> > include/configs/tinker_rk3288.h | 1 +
> > 5 files changed, 164 insertions(+)
> > create mode 100644 arch/arm/dts/rk3288-tinker-s-u-boot.dtsi
> > create mode 100644 arch/arm/dts/rk3288-tinker-s.dts
> > create mode 100644 configs/tinker-s-rk3288_defconfig
> >
> > diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> > index 89ab8001ce..7e9d6809ea 100644
> > --- a/arch/arm/dts/Makefile
> > +++ b/arch/arm/dts/Makefile
> > @@ -87,6 +87,7 @@ dtb-$(CONFIG_ROCKCHIP_RK3288) += \
> > rk3288-popmetal.dtb \
> > rk3288-rock2-square.dtb \
> > rk3288-tinker.dtb \
> > + rk3288-tinker-s.dtb \
> > rk3288-veyron-jerry.dtb \
> > rk3288-veyron-mickey.dtb \
> > rk3288-veyron-minnie.dtb \
> > diff --git a/arch/arm/dts/rk3288-tinker-s-u-boot.dtsi b/arch/arm/dts/rk3288-tinker-s-u-boot.dtsi
> > new file mode 100644
> > index 0000000000..a177fca73a
> > --- /dev/null
> > +++ b/arch/arm/dts/rk3288-tinker-s-u-boot.dtsi
> > @@ -0,0 +1,34 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +/*
> > + * Copyright (C) 2019 Amarula Solutions SRO
> > + */
> > +
> > +#include "rk3288-u-boot.dtsi"
> > +#include "rk3288-tinker-u-boot.dtsi"
> > +
> > +/ {
> > + chosen {
> > + u-boot,spl-boot-order = \
> > + "same-as-spl", &sdmmc, &emmc;
> > + };
> > +};
> > +
> > +&emmc {
> > + u-boot,dm-spl;
> > +};
> > +
> > +&emmc_clk {
> > + u-boot,dm-spl;
> > +};
> > +
> > +&emmc_cmd {
> > + u-boot,dm-spl;
> > +};
> > +
> > +&emmc_pwr {
> > + u-boot,dm-spl;
> > +};
> > +
> > +&emmc_bus8 {
> > + u-boot,dm-spl;
> > +};
> > diff --git a/arch/arm/dts/rk3288-tinker-s.dts b/arch/arm/dts/rk3288-tinker-s.dts
> > new file mode 100644
> > index 0000000000..cc7ac5f881
> > --- /dev/null
> > +++ b/arch/arm/dts/rk3288-tinker-s.dts
> > @@ -0,0 +1,29 @@
> > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> > +/*
> > + * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
> > + */
> > +
> > +/dts-v1/;
> > +
> > +#include "rk3288-tinker.dtsi"
> > +
> > +/ {
> > + model = "Rockchip RK3288 Asus Tinker Board S";
> > + compatible = "asus,rk3288-tinker-s", "rockchip,rk3288";
> > +
> > + chosen {
> > + stdout-path = &uart2;
> > + };
> > +};
> > +
> > +&emmc {
> > + bus-width = <8>;
> > + cap-mmc-highspeed;
> > + non-removable;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>;
> > + max-frequency = <150000000>;
> > + mmc-hs200-1_8v;
> > + mmc-ddr-1_8v;
> > + status = "okay";
> > +};
> > diff --git a/configs/tinker-s-rk3288_defconfig b/configs/tinker-s-rk3288_defconfig
> > new file mode 100644
> > index 0000000000..c851a93f31
> > --- /dev/null
> > +++ b/configs/tinker-s-rk3288_defconfig
> > @@ -0,0 +1,99 @@
> > +CONFIG_ARM=y
> > +CONFIG_ARCH_ROCKCHIP=y
> > +CONFIG_SYS_TEXT_BASE=0x01000000
> > +CONFIG_SPL_GPIO_SUPPORT=y
> > +CONFIG_ROCKCHIP_RK3288=y
> > +CONFIG_TARGET_TINKER_RK3288=y
> > +CONFIG_NR_DRAM_BANKS=1
> > +CONFIG_SPL_SIZE_LIMIT=307200
> > +CONFIG_SPL_STACK_R_ADDR=0x800000
> > +CONFIG_DEBUG_UART_BASE=0xff690000
> > +CONFIG_DEBUG_UART_CLOCK=24000000
> > +CONFIG_DEBUG_UART=y
> > +CONFIG_TPL_SYS_MALLOC_F_LEN=0x4000
> > +CONFIG_SPL_SYS_MALLOC_F_LEN=0x4000
> > +CONFIG_SYS_MALLOC_F_LEN=0x4000
> > +# CONFIG_ANDROID_BOOT_IMAGE is not set
> > +CONFIG_USE_PREBOOT=y
> > +CONFIG_SILENT_CONSOLE=y
> > +CONFIG_CONSOLE_MUX=y
> > +CONFIG_DEFAULT_FDT_FILE="rk3288-tinker-s.dtb"
> > +# CONFIG_DISPLAY_CPUINFO is not set
> > +CONFIG_DISPLAY_BOARDINFO_LATE=y
> > +CONFIG_SPL_STACK_R=y
> > +CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x300000
> > +CONFIG_SPL_I2C_SUPPORT=y
> > +CONFIG_SPL_POWER_SUPPORT=y
> > +CONFIG_CMD_GPIO=y
> > +CONFIG_CMD_GPT=y
> > +CONFIG_CMD_I2C=y
> > +CONFIG_CMD_MMC=y
> > +CONFIG_CMD_SF=y
> > +CONFIG_CMD_SPI=y
> > +CONFIG_CMD_USB=y
> > +CONFIG_CMD_USB_MASS_STORAGE=y
> > +# CONFIG_CMD_SETEXPR is not set
> > +CONFIG_CMD_BMP=y
> > +CONFIG_CMD_CACHE=y
> > +CONFIG_CMD_TIME=y
> > +CONFIG_CMD_PMIC=y
> > +CONFIG_CMD_REGULATOR=y
> > +# CONFIG_SPL_DOS_PARTITION is not set
> > +# CONFIG_SPL_EFI_PARTITION is not set
> > +CONFIG_SPL_PARTITION_UUIDS=y
> > +CONFIG_SPL_OF_CONTROL=y
> > +CONFIG_DEFAULT_DEVICE_TREE="rk3288-tinker-s"
> > +CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
> > +CONFIG_ENV_IS_IN_MMC=y
> > +CONFIG_REGMAP=y
> > +CONFIG_SPL_REGMAP=y
> > +CONFIG_SYSCON=y
> > +CONFIG_SPL_SYSCON=y
> > +# CONFIG_SPL_SIMPLE_BUS is not set
> > +CONFIG_CLK=y
> > +CONFIG_SPL_CLK=y
> > +CONFIG_FASTBOOT_FLASH=y
> > +CONFIG_FASTBOOT_FLASH_MMC_DEV=0
> > +CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
> > +CONFIG_ROCKCHIP_GPIO=y
> > +CONFIG_SYS_I2C_ROCKCHIP=y
> > +CONFIG_MISC=y
> > +CONFIG_I2C_EEPROM=y
> > +CONFIG_MMC_DW=y
> > +CONFIG_MMC_DW_ROCKCHIP=y
> > +CONFIG_SPI_FLASH=y
> > +CONFIG_SF_DEFAULT_SPEED=20000000
> > +CONFIG_DM_ETH=y
> > +CONFIG_ETH_DESIGNWARE=y
> > +CONFIG_GMAC_ROCKCHIP=y
> > +CONFIG_PINCTRL=y
> > +CONFIG_SPL_PINCTRL=y
> > +CONFIG_DM_PMIC=y
> > +CONFIG_PMIC_RK8XX=y
> > +CONFIG_SPL_DM_REGULATOR=y
> > +CONFIG_DM_REGULATOR_FIXED=y
> > +CONFIG_SPL_DM_REGULATOR_FIXED=y
> > +CONFIG_REGULATOR_RK8XX=y
> > +CONFIG_PWM_ROCKCHIP=y
> > +CONFIG_RAM=y
> > +CONFIG_SPL_RAM=y
> > +CONFIG_DEBUG_UART_SHIFT=2
> > +CONFIG_SYSRESET=y
> > +CONFIG_USB=y
> > +CONFIG_USB_DWC2=y
> > +CONFIG_ROCKCHIP_USB2_PHY=y
> > +CONFIG_USB_GADGET=y
> > +CONFIG_USB_GADGET_MANUFACTURER="Rockchip"
> > +CONFIG_USB_GADGET_VENDOR_NUM=0x2207
> > +CONFIG_USB_GADGET_PRODUCT_NUM=0x320a
> > +CONFIG_USB_GADGET_DWC2_OTG=y
> > +CONFIG_USB_HOST_ETHER=y
> > +CONFIG_USB_ETHER_ASIX=y
> > +CONFIG_USB_ETHER_SMSC95XX=y
> > +CONFIG_CMD_DHRYSTONE=y
> > +CONFIG_ERRNO_STR=y
> > +CONFIG_DM_VIDEO=y
> > +CONFIG_DISPLAY=y
> > +CONFIG_VIDEO_ROCKCHIP=y
> > +CONFIG_DISPLAY_ROCKCHIP_HDMI=y
> > +CONFIG_CONSOLE_SCROLL_LINES=10
> > diff --git a/include/configs/tinker_rk3288.h b/include/configs/tinker_rk3288.h
> > index 5adae68c91..f8a55a2cec 100644
> > --- a/include/configs/tinker_rk3288.h
> > +++ b/include/configs/tinker_rk3288.h
> > @@ -12,6 +12,7 @@
> > #undef BOOT_TARGET_DEVICES
> >
> > #define BOOT_TARGET_DEVICES(func) \
> > + func(MMC, mmc, 0) \
> > func(MMC, mmc, 1) \
> > func(USB, usb, 0) \
> > func(PXE, pxe, na) \
>
>
--
| Michael Nazzareno Trimarchi Amarula Solutions BV |
| COO - Founder Cruquiuskade 47 |
| +31(0)851119172 Amsterdam 1018 AM NL |
| [`as] http://www.amarulasolutions.com |
More information about the U-Boot
mailing list