[U-Boot] [PATCH 15/16] efi_loader, pytest: add UEFI secure boot tests (authenticated variables)

AKASHI Takahiro takahiro.akashi at linaro.org
Mon Nov 18 05:58:26 UTC 2019


On Sat, Nov 16, 2019 at 09:28:56PM +0100, Heinrich Schuchardt wrote:
> On 11/13/19 1:53 AM, AKASHI Takahiro wrote:
> >Provide a couple of test cases for variable authentication.
> 
> Please, tell us more in the commit message.

About what?
I have lots of 'text case' descriptions in *.py files.

> >
> >Signed-off-by: AKASHI Takahiro <takahiro.akashi at linaro.org>
> >---
> >  .../py/tests/test_efi_secboot/test_authvar.py | 289 ++++++++++++++++++
> >  1 file changed, 289 insertions(+)
> >  create mode 100644 test/py/tests/test_efi_secboot/test_authvar.py
> >
> >diff --git a/test/py/tests/test_efi_secboot/test_authvar.py b/test/py/tests/test_efi_secboot/test_authvar.py
> >new file mode 100644
> >index 000000000000..ed18b80084d6
> >--- /dev/null
> >+++ b/test/py/tests/test_efi_secboot/test_authvar.py
> >@@ -0,0 +1,289 @@
> >+# SPDX-License-Identifier:      GPL-2.0+
> >+# Copyright (c) 2019, Linaro Limited
> >+# Author: AKASHI Takahiro <takahiro.akashi at linaro.org>
> >+#
> >+# U-Boot UEFI: Variable Authentication Test
> >+
> >+"""
> >+This test verifies variable authentication
> >+"""
> >+
> >+import pytest
> >+import re
> >+from defs import *
> >+
> >+ at pytest.mark.boardspec('sandbox')
> 
> Why can't we run this on other architectures?

As you see, we need some data files, most of which contain data for
signature database variables, to run test cases. Using sandbox
is the easiest way to minimize hardware requirements.

> The sandbox currently only runs in 64bit mode. This way we might miss
> errors that only occur on 32bit systems.

Right, but this is not my patch-specific issue.

> >+ at pytest.mark.buildconfigspec('efi_secure_boot')
> >+ at pytest.mark.buildconfigspec('cmd_fat')
> >+ at pytest.mark.buildconfigspec('cmd_nvedit_efi')
> >+ at pytest.mark.slow
> >+class TestEfiAuthVar(object):
> >+    def test_efi_var_auth1(self, u_boot_console, efi_boot_env):
> >+        """
> >+        Test Case 1 - Install signature database
> >+        """
> >+        disk_img = efi_boot_env
> >+        with u_boot_console.log.section('Test Case 1a'):
> >+            # Test Case 1a, Initial secure state
> >+            output = u_boot_console.run_command_list([
> >+                'host bind 0 %s' % disk_img,
> >+                'printenv -e SecureBoot'])
> >+            assert(re.search('00000000: 00', ''.join(output)))
> >+
> >+            output = u_boot_console.run_command(
> >+                'printenv -e SecureBoot')
> >+            assert('00000000: 00' in output)
> >+            output = u_boot_console.run_command(
> >+                'printenv -e SetupMode')
> >+            assert('00000000: 01' in output)
> >+
> >+        with u_boot_console.log.section('Test Case 1b'):
> >+            # Test Case 1b, PK without AUTHENTICATED_WRITE_ACCESS
> >+            output = u_boot_console.run_command_list([
> >+                'host bind 0 %s' % disk_img,
> >+                'fatload host 0:1 4000000 PK.auth',
> >+                'setenv -e -nv -bs -rt -i 4000000,$filesize PK'])
> >+            assert(re.search('Failed to set EFI variable', ''.join(output)))
> >+
> >+        with u_boot_console.log.section('Test Case 1c'):
> >+            # Test Case 1c, install PK
> >+            output = u_boot_console.run_command_list([
> >+                'fatload host 0:1 4000000 PK.auth',
> >+                'setenv -e -nv -bs -rt -at -i 4000000,$filesize PK',
> >+                'printenv -e PK'])
> >+            assert(re.search('PK:', ''.join(output)))
> >+
> >+            output = u_boot_console.run_command(
> >+                'printenv -e SecureBoot')
> >+            assert('00000000: 01' in output)
> >+            output = u_boot_console.run_command(
> >+                'printenv -e SetupMode')
> >+            assert('00000000: 00' in output)
> >+
> >+        with u_boot_console.log.section('Test Case 1d'):
> >+            # Test Case 1d, db/dbx without KEK
> >+            output = u_boot_console.run_command_list([
> >+                'fatload host 0:1 4000000 db.auth',
> >+                'setenv -e -nv -bs -rt -at -i 4000000,$filesize db'])
> >+            assert(re.search('Failed to set EFI variable', ''.join(output)))
> >+
> >+            output = u_boot_console.run_command_list([
> >+                'fatload host 0:1 4000000 db.auth',
> >+                'setenv -e -nv -bs -rt -at -i 4000000,$filesize dbx'])
> >+            assert(re.search('Failed to set EFI variable', ''.join(output)))
> >+
> >+        with u_boot_console.log.section('Test Case 1e'):
> >+            # Test Case 1e, install KEK
> >+            output = u_boot_console.run_command_list([
> >+                'fatload host 0:1 4000000 KEK.auth',
> >+                'setenv -e -nv -bs -rt -i 4000000,$filesize KEK'])
> >+            assert(re.search('Failed to set EFI variable', ''.join(output)))
> >+
> >+            output = u_boot_console.run_command_list([
> >+                'fatload host 0:1 4000000 KEK.auth',
> >+                'setenv -e -nv -bs -rt -at -i 4000000,$filesize KEK',
> >+                'printenv -e KEK'])
> >+            assert(re.search('KEK:', ''.join(output)))
> >+
> >+            output = u_boot_console.run_command(
> >+                'printenv -e SecureBoot')
> >+            assert('00000000: 01' in output)
> >+
> >+        with u_boot_console.log.section('Test Case 1f'):
> >+            # Test Case 1f, install db
> >+            output = u_boot_console.run_command_list([
> >+                'fatload host 0:1 4000000 db.auth',
> >+                'setenv -e -nv -bs -rt -i 4000000,$filesize db'])
> >+            assert(re.search('Failed to set EFI variable', ''.join(output)))
> >+
> >+            output = u_boot_console.run_command_list([
> >+                'fatload host 0:1 4000000 db.auth',
> >+                'setenv -e -nv -bs -rt -at -i 4000000,$filesize db',
> >+                'printenv -e -guid d719b2cb-3d3a-4596-a3bc-dad00e67656f db'])
> >+            assert(not re.search('Failed to set EFI variable', ''.join(output)))
> >+            assert(re.search('db:', ''.join(output)))
> >+
> >+            output = u_boot_console.run_command(
> >+                'printenv -e SecureBoot')
> >+            assert('00000000: 01' in output)
> >+
> >+        with u_boot_console.log.section('Test Case 1g'):
> >+            # Test Case 1g, install dbx
> >+            output = u_boot_console.run_command_list([
> >+                'fatload host 0:1 4000000 db.auth',
> >+                'setenv -e -nv -bs -rt -i 4000000,$filesize db'])
> >+            assert(re.search('Failed to set EFI variable', ''.join(output)))
> >+
> >+            output = u_boot_console.run_command_list([
> >+                'fatload host 0:1 4000000 db.auth',
> >+                'setenv -e -nv -bs -rt -at -i 4000000,$filesize db',
> >+                'printenv -e -guid d719b2cb-3d3a-4596-a3bc-dad00e67656f db'])
> >+            assert(not re.search('Failed to set EFI variable', ''.join(output)))
> >+            assert(re.search('db:', ''.join(output)))
> >+
> >+            output = u_boot_console.run_command(
> >+                'printenv -e SecureBoot')
> >+            assert('00000000: 01' in output)
> >+
> >+    def test_efi_var_auth2(self, u_boot_console, efi_boot_env):
> >+        """
> >+        Test Case 2 - Update database by overwriting
> >+        """
> >+        disk_img = efi_boot_env
> >+        with u_boot_console.log.section('Test Case 2a'):
> >+            # Test Case 2a, update without AUTHENTICATED_WRITE_ACCESS
> >+            output = u_boot_console.run_command_list([
> >+                'host bind 0 %s' % disk_img,
> >+                'fatload host 0:1 4000000 PK.auth',
> >+                'setenv -e -nv -bs -rt -at -i 4000000,$filesize PK',
> >+                'fatload host 0:1 4000000 KEK.auth',
> >+                'setenv -e -nv -bs -rt -at -i 4000000,$filesize KEK',
> >+                'fatload host 0:1 4000000 db.auth',
> >+                'setenv -e -nv -bs -rt -at -i 4000000,$filesize db',
> >+                'printenv -e -guid d719b2cb-3d3a-4596-a3bc-dad00e67656f db'])
> >+            assert(not re.search('Failed to set EFI variable', ''.join(output)))
> >+            assert(re.search('db:', ''.join(output)))
> >+            assert(re.search('DataSize = 0x327', ''.join(output)))
> >+
> >+            output = u_boot_console.run_command_list([
> >+                'fatload host 0:1 4000000 db1.auth',
> >+                'setenv -e -nv -bs -rt -i 4000000,$filesize db'])
> >+            assert(re.search('Failed to set EFI variable', ''.join(output)))
> >+
> >+        with u_boot_console.log.section('Test Case 2b'):
> >+            # Test Case 2b, update without correct signature
> >+            output = u_boot_console.run_command_list([
> >+                'fatload host 0:1 4000000 db.esl',
> >+                'setenv -e -nv -bs -rt -at -i 4000000,$filesize db'])
> >+            assert(re.search('Failed to set EFI variable', ''.join(output)))
> >+
> >+        with u_boot_console.log.section('Test Case 2c'):
> >+            # Test Case 2c, update with correct signature
> >+            output = u_boot_console.run_command_list([
> >+                'fatload host 0:1 4000000 db1.auth',
> >+                'setenv -e -nv -bs -rt -at -i 4000000,$filesize db',
> >+                'printenv -e -guid d719b2cb-3d3a-4596-a3bc-dad00e67656f db'])
> >+            assert(not re.search('Failed to set EFI variable', ''.join(output)))
> >+            assert(re.search('db:', ''.join(output)))
> >+            assert(re.search('DataSize = 0x329', ''.join(output)))
> >+
> >+    def test_efi_var_auth3(self, u_boot_console, efi_boot_env):
> >+        """
> >+        Test Case 3 - Append database
> >+        """
> >+        disk_img = efi_boot_env
> >+        with u_boot_console.log.section('Test Case 3a'):
> >+            # Test Case 3a, update without AUTHENTICATED_WRITE_ACCESS
> >+            output = u_boot_console.run_command_list([
> >+                'host bind 0 %s' % disk_img,
> >+                'fatload host 0:1 4000000 PK.auth',
> >+                'setenv -e -nv -bs -rt -at -i 4000000,$filesize PK',
> >+                'fatload host 0:1 4000000 KEK.auth',
> >+                'setenv -e -nv -bs -rt -at -i 4000000,$filesize KEK',
> >+                'fatload host 0:1 4000000 db.auth',
> >+                'setenv -e -nv -bs -rt -at -i 4000000,$filesize db',
> >+                'printenv -e -guid d719b2cb-3d3a-4596-a3bc-dad00e67656f db'])
> >+            assert(not re.search('Failed to set EFI variable', ''.join(output)))
> >+            assert(re.search('db:', ''.join(output)))
> >+            assert(re.search('DataSize = 0x327', ''.join(output)))
> >+
> >+            output = u_boot_console.run_command_list([
> >+                'fatload host 0:1 4000000 db1.auth',
> >+                'setenv -e -nv -bs -rt -a -i 4000000,$filesize db'])
> >+            assert(re.search('Failed to set EFI variable', ''.join(output)))
> >+
> >+        with u_boot_console.log.section('Test Case 3b'):
> >+            # Test Case 3b, update without correct signature
> >+            output = u_boot_console.run_command_list([
> >+                'fatload host 0:1 4000000 db.esl',
> 
> Where do find all the files you try to load here?
> 
> You cannot assume that the sandbox is connected to any special file
> system while the test is running as there is no buildconfigspec
> requiring it.

Will add a dependency on 'fs_fat'

-Takahiro Akashi

> Best regards
> 
> Heinrich
> 
> >+                'setenv -e -nv -bs -rt -at -a -i 4000000,$filesize db'])
> >+            assert(re.search('Failed to set EFI variable', ''.join(output)))
> >+
> >+        with u_boot_console.log.section('Test Case 3c'):
> >+            # Test Case 3c, update with correct signature
> >+            output = u_boot_console.run_command_list([
> >+                'fatload host 0:1 4000000 db1.auth',
> >+                'setenv -e -nv -bs -rt -at -a -i 4000000,$filesize db',
> >+                'printenv -e -guid d719b2cb-3d3a-4596-a3bc-dad00e67656f db'])
> >+            assert(not re.search('Failed to set EFI variable', ''.join(output)))
> >+            assert(re.search('db:', ''.join(output)))
> >+            assert(re.search('DataSize = 0x650', ''.join(output)))
> >+
> >+    def test_efi_var_auth4(self, u_boot_console, efi_boot_env):
> >+        """
> >+        Test Case 4 - Delete database without authentication
> >+        """
> >+        disk_img = efi_boot_env
> >+        with u_boot_console.log.section('Test Case 4a'):
> >+            # Test Case 4a, update without AUTHENTICATED_WRITE_ACCESS
> >+            output = u_boot_console.run_command_list([
> >+                'host bind 0 %s' % disk_img,
> >+                'fatload host 0:1 4000000 PK.auth',
> >+                'setenv -e -nv -bs -rt -at -i 4000000,$filesize PK',
> >+                'fatload host 0:1 4000000 KEK.auth',
> >+                'setenv -e -nv -bs -rt -at -i 4000000,$filesize KEK',
> >+                'fatload host 0:1 4000000 db.auth',
> >+                'setenv -e -nv -bs -rt -at -i 4000000,$filesize db',
> >+                'printenv -e -guid d719b2cb-3d3a-4596-a3bc-dad00e67656f db'])
> >+            assert(not re.search('Failed to set EFI variable', ''.join(output)))
> >+            assert(re.search('db:', ''.join(output)))
> >+            assert(re.search('DataSize = 0x327', ''.join(output)))
> >+
> >+            output = u_boot_console.run_command_list([
> >+                'setenv -e -nv -bs -rt db',
> >+                'printenv -e -guid d719b2cb-3d3a-4596-a3bc-dad00e67656f db'])
> >+            assert(re.search('Failed to set EFI variable', ''.join(output)))
> >+            assert(re.search('db:', ''.join(output)))
> >+            assert(re.search('DataSize = 0x327', ''.join(output)))
> >+
> >+        with u_boot_console.log.section('Test Case 4b'):
> >+            # Test Case 4b, update without correct signature/data
> >+            output = u_boot_console.run_command_list([
> >+                'setenv -e -nv -bs -rt -at db',
> >+                'printenv -e -guid d719b2cb-3d3a-4596-a3bc-dad00e67656f db'])
> >+            assert(re.search('Failed to set EFI variable', ''.join(output)))
> >+            assert(re.search('db:', ''.join(output)))
> >+            assert(re.search('DataSize = 0x327', ''.join(output)))
> >+
> >+    def test_efi_var_auth5(self, u_boot_console, efi_boot_env):
> >+        """
> >+        Test Case 5 - Uninstall(delete) PK
> >+        """
> >+        disk_img = efi_boot_env
> >+        with u_boot_console.log.section('Test Case 4a'):
> >+            # Test Case 5a, Uninstall PK without correct signature
> >+            output = u_boot_console.run_command_list([
> >+                'host bind 0 %s' % disk_img,
> >+                'fatload host 0:1 4000000 PK.auth',
> >+                'setenv -e -nv -bs -rt -at -i 4000000,$filesize PK',
> >+                'fatload host 0:1 4000000 KEK.auth',
> >+                'setenv -e -nv -bs -rt -at -i 4000000,$filesize KEK',
> >+                'fatload host 0:1 4000000 db.auth',
> >+                'setenv -e -nv -bs -rt -at -i 4000000,$filesize db',
> >+                'printenv -e PK'])
> >+            assert(not re.search('Failed to set EFI variable', ''.join(output)))
> >+            assert(re.search('PK:', ''.join(output)))
> >+#            assert(re.search('DataSize = 0x31d', ''.join(output)))
> >+
> >+            output = u_boot_console.run_command_list([
> >+                'fatload host 0:1 4000000 PK_null.esl',
> >+                'setenv -e -nv -bs -rt -at -i 4000000,$filesize PK',
> >+                'printenv -e PK'])
> >+            assert(re.search('Failed to set EFI variable', ''.join(output)))
> >+            assert(re.search('PK:', ''.join(output)))
> >+
> >+        with u_boot_console.log.section('Test Case 5b'):
> >+            # Test Case 5b, Uninstall PK with correct signature
> >+            output = u_boot_console.run_command_list([
> >+                'fatload host 0:1 4000000 PK_null.auth',
> >+                'setenv -e -nv -bs -rt -at -i 4000000,$filesize PK',
> >+                'printenv -e PK'])
> >+            assert(not re.search('Failed to set EFI variable', ''.join(output)))
> >+            assert(re.search('\"PK\" not defined', ''.join(output)))
> >+
> >+            output = u_boot_console.run_command(
> >+                'printenv -e SecureBoot')
> >+            assert('00000000: 00' in output)
> >+            output = u_boot_console.run_command(
> >+                'printenv -e SetupMode')
> >+            assert('00000000: 01' in output)
> >
> 


More information about the U-Boot mailing list