[U-Boot] [PATCH 2/4] arm: ls1021a: drop redundant board_mmc_init()

Yangbo Lu yangbo.lu at nxp.com
Tue Nov 12 11:28:37 UTC 2019


The board_mmc_init() defined in board files is actually
doing same thing with the cpu_mmc_init() defined in
arch/arm/cpu/armv7/ls102xa/cpu.c. So drop it.

Signed-off-by: Yangbo Lu <yangbo.lu at nxp.com>
---
 board/freescale/ls1021aiot/ls1021aiot.c | 15 ---------------
 board/freescale/ls1021aqds/ls1021aqds.c | 14 --------------
 board/freescale/ls1021atwr/ls1021atwr.c | 14 --------------
 3 files changed, 43 deletions(-)

diff --git a/board/freescale/ls1021aiot/ls1021aiot.c b/board/freescale/ls1021aiot/ls1021aiot.c
index 70992a5..621a3db 100644
--- a/board/freescale/ls1021aiot/ls1021aiot.c
+++ b/board/freescale/ls1021aiot/ls1021aiot.c
@@ -12,7 +12,6 @@
 #include <asm/arch/ls102xa_devdis.h>
 #include <asm/arch/ls102xa_soc.h>
 #include <fsl_csu.h>
-#include <fsl_esdhc.h>
 #include <fsl_immap.h>
 #include <netdev.h>
 #include <fsl_mdio.h>
@@ -103,20 +102,6 @@ int dram_init(void)
 	return 0;
 }
 
-#ifdef CONFIG_FSL_ESDHC
-struct fsl_esdhc_cfg esdhc_cfg[1] = {
-	{CONFIG_SYS_FSL_ESDHC_ADDR},
-};
-
-int board_mmc_init(bd_t *bis)
-{
-	esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
-
-	return fsl_esdhc_initialize(bis, &esdhc_cfg[0]);
-}
-
-#endif
-
 #ifdef CONFIG_TSEC_ENET
 int board_eth_init(bd_t *bis)
 {
diff --git a/board/freescale/ls1021aqds/ls1021aqds.c b/board/freescale/ls1021aqds/ls1021aqds.c
index 2ca2bd9..4034b7d 100644
--- a/board/freescale/ls1021aqds/ls1021aqds.c
+++ b/board/freescale/ls1021aqds/ls1021aqds.c
@@ -14,7 +14,6 @@
 #include <hwconfig.h>
 #include <mmc.h>
 #include <fsl_csu.h>
-#include <fsl_esdhc.h>
 #include <fsl_ifc.h>
 #include <fsl_sec.h>
 #include <spl.h>
@@ -161,19 +160,6 @@ int dram_init(void)
 	return fsl_initdram();
 }
 
-#ifdef CONFIG_FSL_ESDHC
-struct fsl_esdhc_cfg esdhc_cfg[1] = {
-	{CONFIG_SYS_FSL_ESDHC_ADDR},
-};
-
-int board_mmc_init(bd_t *bis)
-{
-	esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
-
-	return fsl_esdhc_initialize(bis, &esdhc_cfg[0]);
-}
-#endif
-
 int board_early_init_f(void)
 {
 	struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR;
diff --git a/board/freescale/ls1021atwr/ls1021atwr.c b/board/freescale/ls1021atwr/ls1021atwr.c
index fcf2ec9..1a412ee 100644
--- a/board/freescale/ls1021atwr/ls1021atwr.c
+++ b/board/freescale/ls1021atwr/ls1021atwr.c
@@ -14,7 +14,6 @@
 #include <hwconfig.h>
 #include <mmc.h>
 #include <fsl_csu.h>
-#include <fsl_esdhc.h>
 #include <fsl_ifc.h>
 #include <fsl_immap.h>
 #include <netdev.h>
@@ -233,19 +232,6 @@ int dram_init(void)
 	return 0;
 }
 
-#ifdef CONFIG_FSL_ESDHC
-struct fsl_esdhc_cfg esdhc_cfg[1] = {
-	{CONFIG_SYS_FSL_ESDHC_ADDR},
-};
-
-int board_mmc_init(bd_t *bis)
-{
-	esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
-
-	return fsl_esdhc_initialize(bis, &esdhc_cfg[0]);
-}
-#endif
-
 int board_eth_init(bd_t *bis)
 {
 	return pci_eth_init(bis);
-- 
2.7.4



More information about the U-Boot mailing list