[U-Boot] [RFC PATCH] rockchip: tinker: Add automatic board discovery
Michael Nazzareno Trimarchi
michael at amarulasolutions.com
Tue Nov 19 07:01:17 UTC 2019
Hi Kever
On Tue, Nov 19, 2019 at 1:40 AM Kever Yang <kever.yang at rock-chips.com> wrote:
>
>
> On 2019/11/17 下午6:17, Michael Trimarchi wrote:
> > Add a way to detect board id and pcb id.
>
>
> Is there a document for this from vendor? Are they also use these two ids?
>
> If we can detect tinker vs tinker-s, then we don't need two board
> config/dts, right?
>
I'm working to test on some tinker board. I was having only tinker-s.
I prefer to have
both board support and then clean-up after I'm sure
> >
> > Signed-off-by: Michael Trimarchi <michael at amarulasolutions.com>
> > ---
> > arch/arm/dts/rk3288-tinker.dtsi | 33 ++++++++
> > board/rockchip/tinker_rk3288/tinker-rk3288.c | 83 ++++++++++++++++++++
> > 2 files changed, 116 insertions(+)
> >
> > diff --git a/arch/arm/dts/rk3288-tinker.dtsi b/arch/arm/dts/rk3288-tinker.dtsi
> > index 2f816af47f..67a0374050 100644
> > --- a/arch/arm/dts/rk3288-tinker.dtsi
> > +++ b/arch/arm/dts/rk3288-tinker.dtsi
> > @@ -53,6 +53,21 @@
> > #clock-cells = <0>;
> > };
> >
> > + board_info: board-info {
> > + tinker,pcbid0 = <&gpio2 8 GPIO_ACTIVE_HIGH>;
> > + tinker,pcbid1 = <&gpio2 9 GPIO_ACTIVE_HIGH>;
> > + tinker,pcbid2 = <&gpio2 10 GPIO_ACTIVE_HIGH>;
> > + tinker,pid0 = <&gpio2 1 GPIO_ACTIVE_HIGH>;
> > + tinker,pid1 = <&gpio2 2 GPIO_ACTIVE_HIGH>;
> > + tinker,pid2 = <&gpio2 3 GPIO_ACTIVE_HIGH>;
> > + };
> > +
> > + board_control: board-control {
> > + tinker,sdp = <&gpio6 5 GPIO_ACTIVE_HIGH>;
> > + tinker,usblimit = <&gpio6 6 GPIO_ACTIVE_HIGH>;
> > + tinker,maskemmc = <&gpio6 7 GPIO_ACTIVE_HIGH>;
>
> These three pin looks like not related to board detect?
>
I take from debian_uboot. I'm going to manage those pins and drop from
this patch
Michael
>
> Thanks,
>
> - Kever
>
> > + };
> > +
> > gpio-keys {
> > compatible = "gpio-keys";
> > autorepeat;
> > @@ -461,6 +476,10 @@
> > };
> >
> > &pinctrl {
> > + /* Pins that are not explicitely used by any devices */
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&tinker_pin_hog>;
> > +
> > pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
> > drive-strength = <8>;
> > };
> > @@ -482,6 +501,20 @@
> > };
> > };
> >
> > + hog {
> > + tinker_pin_hog: tinker-pin-hog {
> > + rockchip,pins = <2 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>, /* project id 0 */
> > + <2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>, /* project id 1 */
> > + <2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>, /* project id 2 */
> > + <2 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>, /* pcb id 0 */
> > + <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>, /* pcb id 1 */
> > + <2 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>, /* pcb id 2 */
> > + <6 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>, /* sdp detect */
> > + <6 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>, /* current limit */
> > + <6 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>; /* emmc mask */
> > + };
> > + };
> > +
> > eth_phy {
> > eth_phy_pwr: eth-phy-pwr {
> > rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_none>;
> > diff --git a/board/rockchip/tinker_rk3288/tinker-rk3288.c b/board/rockchip/tinker_rk3288/tinker-rk3288.c
> > index 7a0c3c997d..7c65521f55 100644
> > --- a/board/rockchip/tinker_rk3288/tinker-rk3288.c
> > +++ b/board/rockchip/tinker_rk3288/tinker-rk3288.c
> > @@ -5,12 +5,26 @@
> >
> > #include <common.h>
> > #include <dm.h>
> > +#include <dm/device-internal.h>
> > +#include <asm/gpio.h>
> > +#include <dt-bindings/pinctrl/rockchip.h>
> > #include <env.h>
> > #include <i2c_eeprom.h>
> > #include <netdev.h>
> > #include <asm/arch-rockchip/bootrom.h>
> > #include <asm/io.h>
> >
> > +enum project_id {
> > + tinker_board_s = 0,
> > + tinker_board = 7,
> > +};
> > +
> > +enum pcb_id {
> > + SR,
> > + ER,
> > + PR,
> > +};
> > +
> > static int get_ethaddr_from_eeprom(u8 *addr)
> > {
> > int ret;
> > @@ -23,10 +37,14 @@ static int get_ethaddr_from_eeprom(u8 *addr)
> > return i2c_eeprom_read(dev, 0, addr, 6);
> > }
> >
> > +int detect_board_init(void);
> > +
> > int rk3288_board_late_init(void)
> > {
> > u8 ethaddr[6];
> >
> > + detect_board_init();
> > +
> > if (get_ethaddr_from_eeprom(ethaddr))
> > return 0;
> >
> > @@ -45,3 +63,68 @@ int mmc_get_env_dev(void)
> >
> > return 1;
> > }
> > +
> > +int detect_board_init(void)
> > +{
> > + int ret = 0, i;
> > + ofnode node;
> > + struct udevice *gpio_dev2 = NULL;
> > + struct udevice *gpio_dev6 = NULL;
> > + struct gpio_desc pcbid[3];
> > + struct gpio_desc pid[3];
> > + enum project_id prjid;
> > + char gpio_name[64];
> > + enum pcb_id pcbversion;
> > +
> > + debug("%s: detect boad\n", __func__);
> > +
> > + if (uclass_get_device_by_name(UCLASS_GPIO, "gpio2 at ff790000", &gpio_dev2) ||
> > + uclass_get_device_by_name(UCLASS_GPIO, "gpio6 at ff7d0000", &gpio_dev6)) {
> > + printf("Could not get GPIO device.\n");
> > + return -EINVAL;
> > + }
> > +
> > + ret = device_probe(gpio_dev2);
> > + if (ret)
> > + pr_err("%s - probe failed: %d\n", gpio_dev2->name, ret);
> > +
> > + ret = device_probe(gpio_dev6);
> > + if (ret)
> > + pr_err("%s - probe failed: %d\n", gpio_dev6->name, ret);
> > +
> > + node = ofnode_path("/board-info");
> > + if (!ofnode_valid(node)) {
> > + pr_err("%s: no /board-info node?\n", __func__);
> > + return -EINVAL;
> > + }
> > +
> > + for (i = 0; i < 3; i++) {
> > + snprintf(gpio_name, 64, "tinker,pid%d", i);
> > + if (gpio_request_by_name_nodev(node, gpio_name, 0,
> > + &pid[i], GPIOD_IS_IN)) {
> > + printf("Failed to request %s\n", gpio_name);
> > + continue;
> > + }
> > + }
> > +
> > + for (i = 0; i < 3; i++) {
> > + snprintf(gpio_name, 64, "tinker,pcbid%d", i);
> > + if (gpio_request_by_name_nodev(node, gpio_name, 0,
> > + &pcbid[i], GPIOD_IS_IN)) {
> > + printf("Failed to request %s\n", gpio_name);
> > + continue;
> > + }
> > + }
> > +
> > + prjid = dm_gpio_get_value(&pid[0]) | \
> > + dm_gpio_get_value(&pid[1]) << 1 | \
> > + dm_gpio_get_value(&pid[2]) << 2;
> > + pcbversion = dm_gpio_get_value(&pcbid[0]) | \
> > + dm_gpio_get_value(&pcbid[1]) << 1 | \
> > + dm_gpio_get_value(&pcbid[2]) << 2;
> > +
> > + printf("Detect %s rev %d\n",
> > + prjid == tinker_board ? "Tinker" : "Tinker S", pcbversion);
> > +
> > + return ret;
> > +}
>
>
--
| Michael Nazzareno Trimarchi Amarula Solutions BV |
| COO - Founder Cruquiuskade 47 |
| +31(0)851119172 Amsterdam 1018 AM NL |
| [`as] http://www.amarulasolutions.com |
More information about the U-Boot
mailing list