[U-Boot] [PATCH v3 1/3] spi: nxp_fspi: new driver for the FlexSPI controller

[Priyanka Jain]

>-----Original Message-----
>From: U-Boot <u-boot-bounces at lists.denx.de> On Behalf Of Michael Walle
>Sent: Thursday, November 21, 2019 6:18 PM
>To: u-boot at lists.denx.de
>Subject: Re: [U-Boot] [PATCH v3 1/3] spi: nxp_fspi: new driver for the FlexSPI
>controller
>
>Am 2019-11-06 00:03, schrieb Michael Walle:
>> This is a port of the kernel's spi-nxp-fspi driver. It uses the new
>> spi-mem interface and does not expose the more generic spi-xfer
>> interface. The source was taken from the v5.3-rc3 tag.
>>
>> The port was straightforward:
>>  - remove the interrupt handling and the completion by busy polling the
>>    controller
>>  - remove locks
>>  - move the setup of the memory windows into claim_bus()
>>  - move the setup of the speed into set_speed()
>>  - port the device tree bindings from the original fspi_probe() to
>>    ofdata_to_platdata()
>>
>> There were only some style change fixes, no change in any logic. For
>> example, there are busy loops where the return code is not handled
>> correctly, eg. only prints a warning with WARN_ON(). This port
>> intentionally left most functions unchanged to ease future bugfixes.
>>
>> This was tested on a custom LS1028A board. Because the LS1028A doesn't
>> have proper clock framework support, changing the clock speed was not
>> tested. This also means that it is not possible to change the SPI
>> speed on LS1028A for now (neither is it possible in the linux driver).
>>
>> Signed-off-by: Michael Walle <michael at walle.cc>
>> Reviewed-by: Jagan Teki <jagan at amarulasolutions.com>
>> ---
>> changes since v1:
>>  - fixed typo, thanks Jagan
>> changes since v2:
>>  - none
>
>
>Ping. any news on this?
Will pick this patch in next merge window
>
>-michael
-priyankajain