[U-Boot] [PATCH v2 06/14] gpio: remove the open_drain API and ops
Patrick Delaunay
patrick.delaunay at st.com
Tue Nov 26 08:49:03 UTC 2019
This patch removes the ops get_open_drain/set_open_drain
and the API dm_gpio_get_open_drain/dm_gpio_set_open_drain.
The ops only provided in one driver (mpc8xxx gpio) and the
associated API is never called in boards.
This patch prepare a more generic set/get_dir_flags ops,
including the open drain property.
Signed-off-by: Patrick Delaunay <patrick.delaunay at st.com>
---
Changes in v2:
- remove the open_drain API and ops
arch/sandbox/include/asm/gpio.h | 20 ------------------
drivers/gpio/gpio-uclass.c | 36 ---------------------------------
drivers/gpio/mpc8xxx_gpio.c | 22 --------------------
drivers/gpio/sandbox.c | 35 --------------------------------
include/asm-generic/gpio.h | 34 -------------------------------
test/dm/gpio.c | 7 -------
6 files changed, 154 deletions(-)
diff --git a/arch/sandbox/include/asm/gpio.h b/arch/sandbox/include/asm/gpio.h
index de8ac37f42..cfb803bb3b 100644
--- a/arch/sandbox/include/asm/gpio.h
+++ b/arch/sandbox/include/asm/gpio.h
@@ -42,26 +42,6 @@ int sandbox_gpio_get_value(struct udevice *dev, unsigned int offset);
*/
int sandbox_gpio_set_value(struct udevice *dev, unsigned int offset, int value);
-/**
- * Set or reset the simulated open drain mode of a GPIO (used only in sandbox
- * test code)
- *
- * @param gp GPIO number
- * @param value value to set (0 for enabled open drain mode, non-zero for
- * disabled)
- * @return -1 on error, 0 if ok
- */
-int sandbox_gpio_set_open_drain(struct udevice *dev, unsigned offset, int value);
-
-/**
- * Return the state of the simulated open drain mode of a GPIO (used only in
- * sandbox test code)
- *
- * @param gp GPIO number
- * @return -1 on error, 0 if GPIO is input, >0 if output
- */
-int sandbox_gpio_get_open_drain(struct udevice *dev, unsigned offset);
-
/**
* Return the simulated direction of a GPIO (used only in sandbox test code)
*
diff --git a/drivers/gpio/gpio-uclass.c b/drivers/gpio/gpio-uclass.c
index 90fbed455b..eb599cbcfd 100644
--- a/drivers/gpio/gpio-uclass.c
+++ b/drivers/gpio/gpio-uclass.c
@@ -491,38 +491,6 @@ int dm_gpio_set_value(const struct gpio_desc *desc, int value)
return 0;
}
-int dm_gpio_get_open_drain(struct gpio_desc *desc)
-{
- struct dm_gpio_ops *ops = gpio_get_ops(desc->dev);
- int ret;
-
- ret = check_reserved(desc, "get_open_drain");
- if (ret)
- return ret;
-
- if (ops->set_open_drain)
- return ops->get_open_drain(desc->dev, desc->offset);
- else
- return -ENOSYS;
-}
-
-int dm_gpio_set_open_drain(struct gpio_desc *desc, int value)
-{
- struct dm_gpio_ops *ops = gpio_get_ops(desc->dev);
- int ret;
-
- ret = check_reserved(desc, "set_open_drain");
- if (ret)
- return ret;
-
- if (ops->set_open_drain)
- ret = ops->set_open_drain(desc->dev, desc->offset, value);
- else
- return 0; /* feature not supported -> ignore setting */
-
- return ret;
-}
-
int dm_gpio_set_dir_flags(struct gpio_desc *desc, ulong flags)
{
struct udevice *dev = desc->dev;
@@ -1053,10 +1021,6 @@ static int gpio_post_bind(struct udevice *dev)
ops->get_value += gd->reloc_off;
if (ops->set_value)
ops->set_value += gd->reloc_off;
- if (ops->get_open_drain)
- ops->get_open_drain += gd->reloc_off;
- if (ops->set_open_drain)
- ops->set_open_drain += gd->reloc_off;
if (ops->get_function)
ops->get_function += gd->reloc_off;
if (ops->xlate)
diff --git a/drivers/gpio/mpc8xxx_gpio.c b/drivers/gpio/mpc8xxx_gpio.c
index c273c2c8a4..c23f5b5227 100644
--- a/drivers/gpio/mpc8xxx_gpio.c
+++ b/drivers/gpio/mpc8xxx_gpio.c
@@ -144,26 +144,6 @@ static int mpc8xxx_gpio_get_value(struct udevice *dev, uint gpio)
return !!mpc8xxx_gpio_get_val(data->base, gpio_mask(gpio));
}
-static int mpc8xxx_gpio_get_open_drain(struct udevice *dev, uint gpio)
-{
- struct mpc8xxx_gpio_data *data = dev_get_priv(dev);
-
- return !!mpc8xxx_gpio_open_drain_val(data->base, gpio_mask(gpio));
-}
-
-static int mpc8xxx_gpio_set_open_drain(struct udevice *dev, uint gpio,
- int value)
-{
- struct mpc8xxx_gpio_data *data = dev_get_priv(dev);
-
- if (value)
- mpc8xxx_gpio_open_drain_on(data->base, gpio_mask(gpio));
- else
- mpc8xxx_gpio_open_drain_off(data->base, gpio_mask(gpio));
-
- return 0;
-}
-
static int mpc8xxx_gpio_get_function(struct udevice *dev, uint gpio)
{
struct mpc8xxx_gpio_data *data = dev_get_priv(dev);
@@ -240,8 +220,6 @@ static const struct dm_gpio_ops gpio_mpc8xxx_ops = {
.direction_output = mpc8xxx_gpio_direction_output,
.get_value = mpc8xxx_gpio_get_value,
.set_value = mpc8xxx_gpio_set_value,
- .get_open_drain = mpc8xxx_gpio_get_open_drain,
- .set_open_drain = mpc8xxx_gpio_set_open_drain,
.get_function = mpc8xxx_gpio_get_function,
};
diff --git a/drivers/gpio/sandbox.c b/drivers/gpio/sandbox.c
index 2ef5c67ad5..91e8e0677e 100644
--- a/drivers/gpio/sandbox.c
+++ b/drivers/gpio/sandbox.c
@@ -14,7 +14,6 @@
/* Flags for each GPIO */
#define GPIOF_OUTPUT (1 << 0) /* Currently set as an output */
#define GPIOF_HIGH (1 << 1) /* Currently set high */
-#define GPIOF_ODR (1 << 2) /* Currently set to open drain mode */
struct gpio_state {
const char *label; /* label given by requester */
@@ -70,16 +69,6 @@ int sandbox_gpio_set_value(struct udevice *dev, unsigned offset, int value)
return set_gpio_flag(dev, offset, GPIOF_HIGH, value);
}
-int sandbox_gpio_get_open_drain(struct udevice *dev, unsigned offset)
-{
- return get_gpio_flag(dev, offset, GPIOF_ODR);
-}
-
-int sandbox_gpio_set_open_drain(struct udevice *dev, unsigned offset, int value)
-{
- return set_gpio_flag(dev, offset, GPIOF_ODR, value);
-}
-
int sandbox_gpio_get_direction(struct udevice *dev, unsigned offset)
{
return get_gpio_flag(dev, offset, GPIOF_OUTPUT);
@@ -134,28 +123,6 @@ static int sb_gpio_set_value(struct udevice *dev, unsigned offset, int value)
return sandbox_gpio_set_value(dev, offset, value);
}
-/* read GPIO ODR value of port 'offset' */
-static int sb_gpio_get_open_drain(struct udevice *dev, unsigned offset)
-{
- debug("%s: offset:%u\n", __func__, offset);
-
- return sandbox_gpio_get_open_drain(dev, offset);
-}
-
-/* write GPIO ODR value to port 'offset' */
-static int sb_gpio_set_open_drain(struct udevice *dev, unsigned offset, int value)
-{
- debug("%s: offset:%u, value = %d\n", __func__, offset, value);
-
- if (!sandbox_gpio_get_direction(dev, offset)) {
- printf("sandbox_gpio: error: set_open_drain on input gpio %u\n",
- offset);
- return -1;
- }
-
- return sandbox_gpio_set_open_drain(dev, offset, value);
-}
-
static int sb_gpio_get_function(struct udevice *dev, unsigned offset)
{
if (get_gpio_flag(dev, offset, GPIOF_OUTPUT))
@@ -186,8 +153,6 @@ static const struct dm_gpio_ops gpio_sandbox_ops = {
.direction_output = sb_gpio_direction_output,
.get_value = sb_gpio_get_value,
.set_value = sb_gpio_set_value,
- .get_open_drain = sb_gpio_get_open_drain,
- .set_open_drain = sb_gpio_set_open_drain,
.get_function = sb_gpio_get_function,
.xlate = sb_gpio_xlate,
};
diff --git a/include/asm-generic/gpio.h b/include/asm-generic/gpio.h
index 7da2015805..454578c8d2 100644
--- a/include/asm-generic/gpio.h
+++ b/include/asm-generic/gpio.h
@@ -253,8 +253,6 @@ struct dm_gpio_ops {
int value);
int (*get_value)(struct udevice *dev, unsigned offset);
int (*set_value)(struct udevice *dev, unsigned offset, int value);
- int (*get_open_drain)(struct udevice *dev, unsigned offset);
- int (*set_open_drain)(struct udevice *dev, unsigned offset, int value);
/**
* get_function() Get the GPIO function
*
@@ -585,38 +583,6 @@ int dm_gpio_get_value(const struct gpio_desc *desc);
int dm_gpio_set_value(const struct gpio_desc *desc, int value);
-/**
- * dm_gpio_get_open_drain() - Check if open-drain-mode of a GPIO is active
- *
- * This checks if open-drain-mode for a GPIO is enabled or not. This method is
- * optional.
- *
- * @desc: GPIO description containing device, offset and flags,
- * previously returned by gpio_request_by_name()
- * @return Value of open drain mode for GPIO (0 for inactive, 1 for active) or
- * -ve on error
- */
-int dm_gpio_get_open_drain(struct gpio_desc *desc);
-
-/**
- * dm_gpio_set_open_drain() - Switch open-drain-mode of a GPIO on or off
- *
- * This enables or disables open-drain mode for a GPIO. This method is
- * optional; if the driver does not support it, nothing happens when the method
- * is called.
- *
- * In open-drain mode, instead of actively driving the output (Push-pull
- * output), the GPIO's pin is connected to the collector (for a NPN transistor)
- * or the drain (for a MOSFET) of a transistor, respectively. The pin then
- * either forms an open circuit or a connection to ground, depending on the
- * state of the transistor.
- *
- * @desc: GPIO description containing device, offset and flags,
- * previously returned by gpio_request_by_name()
- * @return 0 if OK, -ve on error
- */
-int dm_gpio_set_open_drain(struct gpio_desc *desc, int value);
-
/**
* dm_gpio_set_dir() - Set the direction for a GPIO
*
diff --git a/test/dm/gpio.c b/test/dm/gpio.c
index bb4b20cea9..8abf0cd8c8 100644
--- a/test/dm/gpio.c
+++ b/test/dm/gpio.c
@@ -72,13 +72,6 @@ static int dm_test_gpio(struct unit_test_state *uts)
ut_assertok(ops->set_value(dev, offset, 1));
ut_asserteq(1, ops->get_value(dev, offset));
- /* Make it an open drain output, and reset it */
- ut_asserteq(0, sandbox_gpio_get_open_drain(dev, offset));
- ut_assertok(ops->set_open_drain(dev, offset, 1));
- ut_asserteq(1, sandbox_gpio_get_open_drain(dev, offset));
- ut_assertok(ops->set_open_drain(dev, offset, 0));
- ut_asserteq(0, sandbox_gpio_get_open_drain(dev, offset));
-
/* Make it an input */
ut_assertok(ops->direction_input(dev, offset));
ut_assertok(gpio_get_status(dev, offset, buf, sizeof(buf)));
--
2.17.1
More information about the U-Boot
mailing list