[U-Boot] [PATCH 2/5] common: add blkcache init
Angelo Dureghello
angelo.dureghello at timesys.com
Mon Nov 25 09:59:16 UTC 2019
Hi Eric,
On Sun, Nov 24, 2019 at 5:00 PM Eric Nelson <ericnelsonaz at gmail.com> wrote:
>
> Hi Angelo,
>
> On 11/23/19 3:47 PM, Angelo Dureghello wrote:
> > From: Angelo Durgehello <angelo.dureghello at timesys.com>
> >
> > On m68k, block_cache list is relocated, but next and prev list
> > pointers are not adjusted to the relocated struct list_head address,
> > so the first iteration over the block_cache list hangs.
> >
> > This patch initializes the block_cache list after relocation.
> >
> > Signed-off-by: Angelo Durgehello <angelo.dureghello at timesys.com>
> > ---
> > common/board_r.c | 12 ++++++++++++
> > drivers/block/blkcache.c | 7 ++++++-
> > include/blk.h | 6 ++++++
> > 3 files changed, 24 insertions(+), 1 deletion(-)
> >
> > diff --git a/common/board_r.c b/common/board_r.c
> > index 65720849cd..13e70a5ffb 100644
> > --- a/common/board_r.c
> > +++ b/common/board_r.c
> > @@ -628,6 +628,15 @@ static int initr_bedbug(void)
> > }
> > #endif
> >
> > +#ifdef CONFIG_BLOCK_CACHE
> > +static int initr_blkcache(void)
> > +{
> > + blkcache_init();
> > +
> > + return 0;
> > +}
> > +#endif
> > +
>
> Why the extra level of indirection?
>
> > static int run_main_loop(void)
> > {
> > #ifdef CONFIG_SANDBOX
> > @@ -832,6 +841,9 @@ static init_fnc_t init_sequence_r[] = {
> > #endif
> > #if defined(CONFIG_PRAM)
> > initr_mem,
> > +#endif
> > +#ifdef CONFIG_BLOCK_CACHE
>
> It seems you could call blkcache_init from here directly:
>
reason for this is to maintain "initr_" naming convention, used from
quite all the initr_ calls,
as i.e. static int initr_mmc(void) that's doing the same.
>
> > + initr_blkcache,
> > #endif
> > run_main_loop,
> > };
> > diff --git a/drivers/block/blkcache.c b/drivers/block/blkcache.c
> > index 1fa64989d3..bf0fa1ea6f 100644
> > --- a/drivers/block/blkcache.c
> > +++ b/drivers/block/blkcache.c
> > @@ -21,13 +21,18 @@ struct block_cache_node {
> > char *cache;
> > };
> >
> > -static LIST_HEAD(block_cache);
> > +static struct list_head block_cache;
> >
> > static struct block_cache_stats _stats = {
> > .max_blocks_per_entry = 8,
> > .max_entries = 32
> > };
> >
> > +void blkcache_init(void)
> > +{
> > + INIT_LIST_HEAD(&block_cache);
> > +}
> > +
> > static struct block_cache_node *cache_find(int iftype, int devnum,
> > lbaint_t start, lbaint_t blkcnt,
> > unsigned long blksz)
> > diff --git a/include/blk.h b/include/blk.h
> > index d0c033aece..7070fd6af3 100644
> > --- a/include/blk.h
> > +++ b/include/blk.h
> > @@ -113,6 +113,12 @@ struct blk_desc {
> > (PAD_SIZE(size, blk_desc->blksz))
> >
> > #if CONFIG_IS_ENABLED(BLOCK_CACHE)
> > +
> > +/**
> > + * blkcache_init() - initialize the block cache list pointers
> > + */
> > +void blkcache_init(void);
> > +
> > /**
> > * blkcache_read() - attempt to read a set of blocks from cache
> > *
> >
>
Regards,
--
Angelo Dureghello
More information about the U-Boot
mailing list