[U-Boot] [PATCH v2 09/10] rockchip: Setup dwc3_device (for non-dm gadgets)
Kever Yang
kever.yang at rock-chips.com
Sat Nov 23 14:22:04 UTC 2019
On 2019/11/19 下午4:26, Jagan Teki wrote:
> Setup dwc3_device structure for non-dm gadgets, which is used
> in rk3399 platforms.
>
> dwc3_device would have basic regbase, dr_mode, high speed
> and 16-bit UTMI+ etc.
>
> Cc: Marek Vasut <marex at denx.de>
> Tested-by: Levin Du <djw at t-chip.com.cn>
> Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang at rock-chips.com>
Thanks,
- Kever
> ---
> arch/arm/mach-rockchip/board.c | 32 ++++++++++++++++++++++++++++++--
> 1 file changed, 30 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/mach-rockchip/board.c b/arch/arm/mach-rockchip/board.c
> index c90eb976d0..542823b8cd 100644
> --- a/arch/arm/mach-rockchip/board.c
> +++ b/arch/arm/mach-rockchip/board.c
> @@ -49,8 +49,10 @@ void enable_caches(void)
> }
> #endif
>
> -#if defined(CONFIG_USB_GADGET) && defined(CONFIG_USB_GADGET_DWC2_OTG)
> +#if defined(CONFIG_USB_GADGET)
> #include <usb.h>
> +
> +#if defined(CONFIG_USB_GADGET_DWC2_OTG)
> #include <usb/dwc2_udc.h>
>
> static struct dwc2_plat_otg_data otg_data = {
> @@ -117,7 +119,33 @@ int board_usb_cleanup(int index, enum usb_init_type init)
> {
> return 0;
> }
> -#endif
> +#endif /* CONFIG_USB_GADGET_DWC2_OTG */
> +
> +#if defined(CONFIG_USB_DWC3) && !defined(CONFIG_DM_USB_GADGET)
> +#include <dwc3-uboot.h>
> +
> +static struct dwc3_device dwc3_device_data = {
> + .maximum_speed = USB_SPEED_HIGH,
> + .base = 0xfe800000,
> + .dr_mode = USB_DR_MODE_PERIPHERAL,
> + .index = 0,
> + .dis_u2_susphy_quirk = 1,
> + .hsphy_mode = USBPHY_INTERFACE_MODE_UTMIW,
> +};
> +
> +int usb_gadget_handle_interrupts(void)
> +{
> + dwc3_uboot_handle_interrupt(0);
> + return 0;
> +}
> +
> +int board_usb_init(int index, enum usb_init_type init)
> +{
> + return dwc3_uboot_init(&dwc3_device_data);
> +}
> +#endif /* CONFIG_USB_DWC3 */
> +
> +#endif /* CONFIG_USB_GADGET */
>
> #if CONFIG_IS_ENABLED(FASTBOOT)
> int fastboot_set_reboot_flag(void)
More information about the U-Boot
mailing list