[U-Boot] [PATCH v3 06/11] drivers: net: aquantia: set MDI reversal based on DT property

[Joe Hershberger]

On Thu, Nov 14, 2019 at 10:34 AM Alex Marginean
<alexandru.marginean at nxp.com> wrote:
>
> MDI pins up to the RJ45 connector may be reversed on the board and the
> default PHY configuration applied by firmware may or may not match that.
> Add an optional DT property to configure MDI reversal for this case.
>
> Signed-off-by: Alex Marginean <alexandru.marginean at nxp.com>

Acked-by: Joe Hershberger <joe.hershberger at ni.com>