[U-Boot] [PATCH 5/6] arm: K3: Increase default SYSFW image size allocation

Andrew F. Davis afd at ti.com
Wed Nov 20 17:40:31 UTC 2019

The memory allocated to store the FIT image containing SYSFW and board
configuration data is statically defined to the largest size expected.
This was 276000 bytes but now needs to be grown to 277000 to make room
for the slightly larger SYSFW image used on J721e High-Security devices.

Signed-off-by: Andrew F. Davis <afd at ti.com>
 arch/arm/mach-k3/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-k3/Kconfig b/arch/arm/mach-k3/Kconfig
index 5583241943..2e111bbf27 100644
--- a/arch/arm/mach-k3/Kconfig
+++ b/arch/arm/mach-k3/Kconfig
@@ -119,7 +119,7 @@ config K3_SYSFW_IMAGE_MMCSD_RAW_MODE_PART
 	int "Amount of memory dynamically allocated for loading SYSFW blob"
 	depends on K3_LOAD_SYSFW
-	default	276000
+	default	277000
 	  Amount of memory (in bytes) reserved through dynamic allocation at
 	  runtime for loading the combined System Firmware and configuration image

More information about the U-Boot mailing list