[U-Boot] [PATCH 5/6] arm: dts: ls1028a: adds Ethernet switch node and its dependencies

[Michael Walle]

Am 2019-11-22 02:36, schrieb Alex Marginean:
> The definition follows the DSA binding in kernel and describes the 
> switch,
> its ports and PHYs.
> ENETC PF6 is the 2nd Eth controller linked to the switch on LS1028, it 
> is

nitpicking.. LS1028A


> not used in U-Boot and was disabled.

it should be checked that the connected enetc port should be enabled. 
otherwise this driver goes awry.

[snip]