[U-Boot] [PATCH] rockchip: rk3399: Add Pinebook Pro laptop support
Peter Robinson
pbrobinson at gmail.com
Thu Nov 14 00:51:07 UTC 2019
Add initial support for Pinebook Pro laptop.
Specification
- Rockchip RK3399
- 4GB Dual-Channel LPDDR4
- SD card slot
- eMMC socket
- 128Mb SPI Flash
- PCIe 4X slot
- AP6256 for WiFi + BT
- 1920*1080 screen
- USB 3.0, 2.0
- USB Type C power and data
- DC 12V/2A
Signed-off-by: Peter Robinson <pbrobinson at gmail.com>
---
Initial v1 for feedback
U-Boot TPL 2020.01-rc2-00005-g7d87be0ff5 (Nov 14 2019 - 00:27:33)
Trying to boot from BOOTROM
Returning to boot ROM...
U-Boot SPL 2020.01-rc2-00005-g7d87be0ff5 (Nov 14 2019 - 00:27:33 +0000)
Trying to boot from MMC1
U-Boot 2020.01-rc2-00005-g7d87be0ff5 (Nov 14 2019 - 00:27:33 +0000)
Model: Pine64 Pinebook Pro
DRAM: 3.9 GiB
PMIC: RK808
MMC: dwmmc at fe320000: 1, sdhci at fe330000: 0
In: serial at ff1a0000
Out: serial at ff1a0000
Err: serial at ff1a0000
Model: Pine64 Pinebook Pro
## Error: Can't overwrite "serial#"
## Error inserting "serial#" variable, errno=1
rockchip_dnl_key_pressed: adc_channel_single_shot fail!
Net: No ethernet found.
Hit any key to stop autoboot: 0
=>
arch/arm/dts/Makefile | 1 +
arch/arm/dts/rk3399-pinebook-pro-u-boot.dtsi | 25 +
arch/arm/dts/rk3399-pinebook-pro.dts | 631 ++++++++++++++++++
arch/arm/mach-rockchip/rk3399/Kconfig | 8 +
board/pine64/pinebook_pro_rk3399/Kconfig | 15 +
board/pine64/pinebook_pro_rk3399/MAINTAINERS | 8 +
board/pine64/pinebook_pro_rk3399/Makefile | 1 +
.../pinebook_pro_rk3399/pinebook-pro-rk3399.c | 192 ++++++
configs/pinebook_pro-rk3399_defconfig | 76 +++
include/configs/pinebook_pro_rk3399.h | 29 +
10 files changed, 986 insertions(+)
create mode 100644 arch/arm/dts/rk3399-pinebook-pro-u-boot.dtsi
create mode 100644 arch/arm/dts/rk3399-pinebook-pro.dts
create mode 100644 board/pine64/pinebook_pro_rk3399/Kconfig
create mode 100644 board/pine64/pinebook_pro_rk3399/MAINTAINERS
create mode 100644 board/pine64/pinebook_pro_rk3399/Makefile
create mode 100644 board/pine64/pinebook_pro_rk3399/pinebook-pro-rk3399.c
create mode 100644 configs/pinebook_pro-rk3399_defconfig
create mode 100644 include/configs/pinebook_pro_rk3399.h
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 5a64fcc5a7..affedfd666 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -116,6 +116,7 @@ dtb-$(CONFIG_ROCKCHIP_RK3399) += \
rk3399-nanopi-m4.dtb \
rk3399-nanopi-neo4.dtb \
rk3399-orangepi.dtb \
+ rk3399-pinebook-pro.dtb \
rk3399-puma-ddr1333.dtb \
rk3399-puma-ddr1600.dtb \
rk3399-puma-ddr1866.dtb \
diff --git a/arch/arm/dts/rk3399-pinebook-pro-u-boot.dtsi b/arch/arm/dts/rk3399-pinebook-pro-u-boot.dtsi
new file mode 100644
index 0000000000..9b0cb7010f
--- /dev/null
+++ b/arch/arm/dts/rk3399-pinebook-pro-u-boot.dtsi
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Peter Robinson <pbrobinson at gmail.com>
+ */
+
+#include "rk3399-u-boot.dtsi"
+#include "rk3399-sdram-lpddr4-100.dtsi"
+
+/ {
+ chosen {
+ u-boot,spl-boot-order = "same-as-spl", &sdhci, &sdmmc;
+ };
+};
+
+&pmugrf {
+ u-boot,dm-pre-reloc;
+};
+
+&spiflash {
+ u-boot,dm-pre-reloc;
+};
+
+&uart2 {
+ u-boot,dm-pre-reloc;
+};
diff --git a/arch/arm/dts/rk3399-pinebook-pro.dts b/arch/arm/dts/rk3399-pinebook-pro.dts
new file mode 100644
index 0000000000..85ce0206d7
--- /dev/null
+++ b/arch/arm/dts/rk3399-pinebook-pro.dts
@@ -0,0 +1,631 @@
+/*
+ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+ model = "Pine64 Pinebook Pro";
+ compatible = "pine64,pinebook-pro", "rockchip,rk3399";
+
+ chosen {
+ stdout-path = &uart2;
+ };
+
+ aliases {
+ spi0 = &spi1;
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ enable-gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
+ pwms = <&pwm0 0 740740 0>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ autorepeat;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwrbtn>;
+
+ power {
+ debounce-interval = <100>;
+ gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
+ label = "GPIO Key Power";
+ linux,code = <KEY_POWER>;
+ wakeup-source;
+ };
+ };
+
+ leds {
+ status = "okay";
+ compatible = "gpio-leds";
+
+ work-led {
+ label = "work";
+ gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
+ };
+
+ standby-led {
+ label = "standby";
+ gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ clocks = <&rk808 1>;
+ clock-names = "ext_clock";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_enable_h>;
+
+ /*
+ * On the module itself this is one of these (depending
+ * on the actual card populated):
+ * - SDIO_RESET_L_WL_REG_ON
+ * - PDN (power down when low)
+ */
+ reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+ };
+
+ /* switched by pmic_sleep */
+ vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc1v8_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc_1v8>;
+ };
+
+ dc_12v: dc-12v {
+ compatible = "regulator-fixed";
+ regulator-name = "dc_12v";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ };
+
+ vcc3v3_sys: vcc3v3-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc_sys>;
+ };
+
+ vcc5v0_host: vcc5v0-host-regulator {
+ compatible = "regulator-fixed";
+ gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&host_vbus_drv>;
+ regulator-name = "vcc5v0_host";
+ };
+
+ vcc5v0_usb3_host: vcc5v0-usb3-host-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&host_usb3_drv>;
+ regulator-name = "vcc5v0_usb3_host";
+ regulator-always-on;
+ };
+
+ vcc_sys: vcc-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&dc_12v>;
+ };
+
+ vdd_log: vdd-log {
+ compatible = "pwm-regulator";
+ pwms = <&pwm2 0 25000 1>;
+ pwm-supply = <&vcc_sys>;
+ regulator-name = "vdd_log";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-init-microvolt = <950000>;
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ };
+};
+
+&cpu_l0 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&emmc_phy {
+ status = "okay";
+};
+
+&i2c0 {
+ clock-frequency = <400000>;
+ i2c-scl-rising-time-ns = <168>;
+ i2c-scl-falling-time-ns = <4>;
+ status = "okay";
+
+ rk808: pmic at 1b {
+ compatible = "rockchip,rk808";
+ reg = <0x1b>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+ #clock-cells = <1>;
+ clock-output-names = "xin32k", "rk808-clkout2";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int_l>;
+ rockchip,system-power-controller;
+ wakeup-source;
+
+ vcc1-supply = <&vcc_sys>;
+ vcc2-supply = <&vcc_sys>;
+ vcc3-supply = <&vcc_sys>;
+ vcc4-supply = <&vcc_sys>;
+ vcc6-supply = <&vcc_sys>;
+ vcc7-supply = <&vcc_sys>;
+ vcc8-supply = <&vcc3v3_sys>;
+ vcc9-supply = <&vcc_sys>;
+ vcc10-supply = <&vcc_sys>;
+ vcc11-supply = <&vcc_sys>;
+ vcc12-supply = <&vcc3v3_sys>;
+ vddio-supply = <&vcc_1v8>;
+
+ regulators {
+ vdd_center: DCDC_REG1 {
+ regulator-name = "vdd_center";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_cpu_l: DCDC_REG2 {
+ regulator-name = "vdd_cpu_l";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-name = "vcc_ddr";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_1v8: DCDC_REG4 {
+ regulator-name = "vcc_1v8";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc1v8_dvp: LDO_REG1 {
+ regulator-name = "vcc1v8_dvp";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc3v0_touch: LDO_REG2 {
+ regulator-name = "vcc3v0_touch";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3000000>;
+ };
+ };
+
+ vcc1v8_pmu: LDO_REG3 {
+ regulator-name = "vcc1v8_pmu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc_sdio: LDO_REG4 {
+ regulator-name = "vcc_sdio";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcca3v0_codec: LDO_REG5 {
+ regulator-name = "vcca3v0_codec";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_1v5: LDO_REG6 {
+ regulator-name = "vcc_1v5";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1500000>;
+ };
+ };
+
+ vcca1v8_codec: LDO_REG7 {
+ regulator-name = "vcca1v8_codec";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_3v0: LDO_REG8 {
+ regulator-name = "vcc_3v0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3000000>;
+ };
+ };
+
+ vcc3v3_s3: SWITCH_REG1 {
+ regulator-name = "vcc3v3_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc3v3_s0: SWITCH_REG2 {
+ regulator-name = "vcc3v3_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+ };
+ };
+
+ vdd_cpu_b: regulator at 40 {
+ compatible = "silergy,syr827";
+ reg = <0x40>;
+ fcs,suspend-voltage-selector = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vsel1_gpio>;
+ vsel-gpios = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>;
+ regulator-compatible = "fan53555-reg";
+ regulator-name = "vdd_cpu_b";
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1500000>;
+ regulator-ramp-delay = <1000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_gpu: regulator at 41 {
+ compatible = "silergy,syr828";
+ reg = <0x41>;
+ fcs,suspend-voltage-selector = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vsel2_gpio>;
+ vsel-gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_HIGH>;
+ regulator-compatible = "fan53555-reg";
+ regulator-name = "vdd_gpu";
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1500000>;
+ regulator-ramp-delay = <1000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+};
+
+&i2c4 {
+ i2c-scl-rising-time-ns = <600>;
+ i2c-scl-falling-time-ns = <20>;
+ status = "okay";
+
+ fusb0: typec-portc at 22 {
+ compatible = "fcs,fusb302";
+ reg = <0x22>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&fusb0_int>;
+ vbus-supply = <&vcc5v0_usb3_host>;
+ status = "okay";
+ };
+};
+
+&io_domains {
+ status = "okay";
+
+ bt656-supply = <&vcc1v8_dvp>;
+ audio-supply = <&vcca1v8_codec>;
+ sdmmc-supply = <&vcc_sdio>;
+ gpio1830-supply = <&vcc_3v0>;
+};
+
+&pmu_io_domains {
+ pmu1830-supply = <&vcc_3v0>;
+ status = "okay";
+};
+
+&pinctrl {
+ buttons {
+ pwrbtn: pwrbtn {
+ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ fusb302x {
+ fusb0_int: fusb0-int {
+ rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ pmic {
+ pmic_int_l: pmic-int-l {
+ rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ vsel1_gpio: vsel1-gpio {
+ rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+
+ vsel2_gpio: vsel2-gpio {
+ rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+
+ sdio-pwrseq {
+ wifi_enable_h: wifi-enable-h {
+ rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ usb-typec {
+ vcc5v0_typec_en: vcc5v0_typec_en {
+ rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ usb2 {
+ vcc5v0_host_en: vcc5v0-host-en {
+ rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ host_vbus_drv: host-vbus-drv {
+ rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ host_usb3_drv: host-usb3-drv {
+ rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&pwm0 {
+ status = "okay";
+};
+
+&pwm1 {
+ status = "okay";
+};
+
+&pwm2 {
+ status = "okay";
+};
+
+&saradc {
+ status = "okay";
+};
+
+&sdmmc {
+ bus-width = <4>;
+ status = "okay";
+ max-frequency = <20000000>;
+};
+
+&sdhci {
+ bus-width = <8>;
+ max-frequency = <25000000>;
+ mmc-hs400-1_8v;
+ mmc-hs400-enhanced-strobe;
+ non-removable;
+ status = "okay";
+};
+
+&tcphy0 {
+ status = "okay";
+};
+
+&tcphy1 {
+ status = "okay";
+};
+
+&tsadc {
+ /* tshut mode 0:CRU 1:GPIO */
+ rockchip,hw-tshut-mode = <1>;
+ /* tshut polarity 0:LOW 1:HIGH */
+ rockchip,hw-tshut-polarity = <1>;
+ status = "okay";
+};
+
+&u2phy0 {
+ status = "okay";
+
+ u2phy0_otg: otg-port {
+ status = "okay";
+ };
+
+ u2phy0_host: host-port {
+ phy-supply = <&vcc5v0_host>;
+ status = "okay";
+ };
+};
+
+&u2phy1 {
+ status = "okay";
+
+ u2phy1_otg: otg-port {
+ status = "okay";
+ };
+
+ u2phy1_host: host-port {
+ phy-supply = <&vcc5v0_host>;
+ status = "okay";
+ };
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
+
+&usb_host1_ehci {
+ status = "okay";
+};
+
+&usb_host1_ohci {
+ status = "okay";
+};
+
+&usbdrd3_0 {
+ status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+ status = "okay";
+ dr_mode = "otg";
+};
+
+&usbdrd3_1 {
+ status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+ status = "okay";
+ dr_mode = "host";
+};
+
+&spi1 {
+ status = "okay";
+
+ spiflash: spi-flash at 0 {
+ #address-cells = <0x1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0x0>;
+ spi-max-frequency = <10000000>;
+ status = "okay";
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ loader at 8000 {
+ label = "loader";
+ reg = <0x0 0x3F8000>;
+ };
+
+ env at 3f8000 {
+ label = "env";
+ reg = <0x3F8000 0x8000>;
+ };
+
+ vendor at 7c0000 {
+ label = "vendor";
+ reg = <0x7C0000 0x40000>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/mach-rockchip/rk3399/Kconfig b/arch/arm/mach-rockchip/rk3399/Kconfig
index f781eacd16..f694ce0119 100644
--- a/arch/arm/mach-rockchip/rk3399/Kconfig
+++ b/arch/arm/mach-rockchip/rk3399/Kconfig
@@ -10,6 +10,13 @@ config TARGET_EVB_RK3399
with full function and phisical connectors support like type-C ports,
usb2.0 host ports, LVDS, JTAG, MAC, SDcard, HDMI, USB-2-serial...
+config TARGET_PINEBOOK_PRO_RK3399
+ bool "Pinebook Pro"
+ help
+ Pinebook Pro is a laptop based on the Rockchip rk3399 SoC
+ with 4Gb RAM, onboard eMMC, USB-C, a USB3 and USB2 port,
+ 1920*1080 screen and all the usual laptop features.
+
config TARGET_PUMA_RK3399
bool "Theobroma Systems RK3399-Q7 (Puma)"
help
@@ -94,6 +101,7 @@ config TPL_TEXT_BASE
config SPL_STACK_R_ADDR
default 0x04000000
+source "board/pine64/pinebook_pro_rk3399/Kconfig"
source "board/rockchip/evb_rk3399/Kconfig"
source "board/theobroma-systems/puma_rk3399/Kconfig"
source "board/vamrs/rock960_rk3399/Kconfig"
diff --git a/board/pine64/pinebook_pro_rk3399/Kconfig b/board/pine64/pinebook_pro_rk3399/Kconfig
new file mode 100644
index 0000000000..c37c643d6f
--- /dev/null
+++ b/board/pine64/pinebook_pro_rk3399/Kconfig
@@ -0,0 +1,15 @@
+if TARGET_PINEBOOK_PRO_RK3399
+
+config SYS_BOARD
+ default "pinebook_pro_rk3399"
+
+config SYS_VENDOR
+ default "pine64"
+
+config SYS_CONFIG_NAME
+ default "pinebook_pro_rk3399"
+
+config BOARD_SPECIFIC_OPTIONS
+ def_bool y
+
+endif
diff --git a/board/pine64/pinebook_pro_rk3399/MAINTAINERS b/board/pine64/pinebook_pro_rk3399/MAINTAINERS
new file mode 100644
index 0000000000..58400ebd28
--- /dev/null
+++ b/board/pine64/pinebook_pro_rk3399/MAINTAINERS
@@ -0,0 +1,8 @@
+PINEBOOK_PRO
+M: Peter Robinson <pbrobinson at gmail.com>
+S: Maintained
+F: board/pine64/pinebook_pro_rk3399/
+F: include/configs/pinebook_pro_rk3399.h
+F: arch/arm/dts/rk3399-pinebook-pro.dts
+F: arch/arm/dts/rk3399-pinebook-pro-u-boot.dtsi
+F: configs/pinebook_pro-rk3399_defconfig
diff --git a/board/pine64/pinebook_pro_rk3399/Makefile b/board/pine64/pinebook_pro_rk3399/Makefile
new file mode 100644
index 0000000000..2f692a12a6
--- /dev/null
+++ b/board/pine64/pinebook_pro_rk3399/Makefile
@@ -0,0 +1 @@
+obj-y += pinebook-pro-rk3399.o
diff --git a/board/pine64/pinebook_pro_rk3399/pinebook-pro-rk3399.c b/board/pine64/pinebook_pro_rk3399/pinebook-pro-rk3399.c
new file mode 100644
index 0000000000..b1a2ed3b77
--- /dev/null
+++ b/board/pine64/pinebook_pro_rk3399/pinebook-pro-rk3399.c
@@ -0,0 +1,192 @@
+/*
+ * (C) Copyright 2016 Rockchip Electronics Co., Ltd
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+#include <common.h>
+#include <dm.h>
+#include <misc.h>
+#include <syscon.h>
+#include <dm/pinctrl.h>
+#include <dm/uclass-internal.h>
+#include <asm/io.h>
+#include <asm/setup.h>
+#include <asm/arch-rockchip/clock.h>
+#include <asm/arch-rockchip/grf_rk3399.h>
+#include <asm/arch-rockchip/hardware.h>
+#include <asm/arch-rockchip/misc.h>
+#include <asm/arch-rockchip/periph.h>
+#include <power/regulator.h>
+#include <usb.h>
+#include <dwc3-uboot.h>
+
+#define RK3399_CPUID_OFF 0x7
+#define RK3399_CPUID_LEN 0x10
+
+static int fix_lcd_backling_pull_mode(void)
+{
+#include <asm/arch-rockchip/grf_rk3399.h>
+
+#define PMU_GRF_BASE 0xff320000
+
+ // set pull of GPIO1_A0
+ struct rk3399_pmugrf_regs * const pmugrf = (void *)PMU_GRF_BASE;
+ rk_clrsetreg(&pmugrf->gpio1_p[0], 3 << (2 * 0), 0 << (2 * 0));
+ return 0;
+}
+
+#ifndef CONFIG_SPL_BUILD
+int board_early_init_f(void)
+{
+ struct udevice *regulator;
+ int ret;
+
+ ret = regulator_get_by_platname("vcc5v0_host", ®ulator);
+ if (ret) {
+ debug("%s vcc5v0_host init fail! ret %d\n", __func__, ret);
+ goto out;
+ }
+
+ ret = regulator_set_enable(regulator, true);
+ if (ret)
+ debug("%s vcc5v0-host-en set fail! ret %d\n", __func__, ret);
+
+ fix_lcd_backling_pull_mode();
+
+out:
+ return 0;
+}
+#endif
+
+static void setup_serial(void)
+{
+#if CONFIG_IS_ENABLED(ROCKCHIP_EFUSE)
+ struct udevice *dev;
+ int ret, i;
+ u8 cpuid[RK3399_CPUID_LEN];
+ u8 low[RK3399_CPUID_LEN/2], high[RK3399_CPUID_LEN/2];
+ char cpuid_str[RK3399_CPUID_LEN * 2 + 1];
+ u64 serialno;
+ char serialno_str[16];
+
+ /* retrieve the device */
+ ret = uclass_get_device_by_driver(UCLASS_MISC,
+ DM_GET_DRIVER(rockchip_efuse), &dev);
+ if (ret) {
+ debug("%s: could not find efuse device\n", __func__);
+ return;
+ }
+
+ /* read the cpu_id range from the efuses */
+ ret = misc_read(dev, RK3399_CPUID_OFF, &cpuid, sizeof(cpuid));
+ if (ret) {
+ debug("%s: reading cpuid from the efuses failed\n",
+ __func__);
+ return;
+ }
+
+ memset(cpuid_str, 0, sizeof(cpuid_str));
+ for (i = 0; i < 16; i++)
+ sprintf(&cpuid_str[i * 2], "%02x", cpuid[i]);
+
+ debug("cpuid: %s\n", cpuid_str);
+
+ /*
+ * Mix the cpuid bytes using the same rules as in
+ * ${linux}/drivers/soc/rockchip/rockchip-cpuinfo.c
+ */
+ for (i = 0; i < 8; i++) {
+ low[i] = cpuid[1 + (i << 1)];
+ high[i] = cpuid[i << 1];
+ }
+
+ serialno = crc32_no_comp(0, low, 8);
+ serialno |= (u64)crc32_no_comp(serialno, high, 8) << 32;
+ snprintf(serialno_str, sizeof(serialno_str), "%llx", serialno);
+
+ env_set("cpuid#", cpuid_str);
+ env_set("serial#", serialno_str);
+#endif
+
+ return;
+}
+
+#define GRF_IO_VSEL_BT565_SHIFT 0
+#define PMUGRF_CON0_VSEL_SHIFT 8
+
+#ifdef CONFIG_MISC_INIT_R
+static void setup_iodomain(void)
+{
+ struct rk3399_grf_regs *grf =
+ syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
+ struct rk3399_pmugrf_regs *pmugrf =
+ syscon_get_first_range(ROCKCHIP_SYSCON_PMUGRF);
+
+ /* BT565 is in 1.8v domain */
+ rk_setreg(&grf->io_vsel, 1 << GRF_IO_VSEL_BT565_SHIFT);
+
+ /* Set GPIO1 1.8v/3.0v source select to PMU1830_VOL */
+ rk_setreg(&pmugrf->soc_con0, 1 << PMUGRF_CON0_VSEL_SHIFT);
+}
+
+int misc_init_r(void)
+{
+ const u32 cpuid_offset = 0x7;
+ const u32 cpuid_length = 0x10;
+ u8 cpuid[cpuid_length];
+ int ret;
+
+ setup_iodomain();
+
+ ret = rockchip_cpuid_from_efuse(cpuid_offset, cpuid_length, cpuid);
+ if (ret)
+ return ret;
+
+ ret = rockchip_cpuid_set(cpuid, cpuid_length);
+ if (ret)
+ return ret;
+
+ ret = rockchip_setup_macaddr();
+
+ setup_serial();
+
+ return ret;
+}
+#endif
+
+#ifdef CONFIG_SERIAL_TAG
+void get_board_serial(struct tag_serialnr *serialnr)
+{
+ char *serial_string;
+ u64 serial = 0;
+
+ serial_string = env_get("serial#");
+
+ if (serial_string)
+ serial = simple_strtoull(serial_string, NULL, 16);
+
+ serialnr->high = (u32)(serial >> 32);
+ serialnr->low = (u32)(serial & 0xffffffff);
+}
+#endif
+
+#ifdef CONFIG_USB_DWC3
+static struct dwc3_device dwc3_device_data = {
+ .maximum_speed = USB_SPEED_HIGH,
+ .base = 0xfe800000,
+ .dr_mode = USB_DR_MODE_PERIPHERAL,
+ .index = 0,
+ .dis_u2_susphy_quirk = 1,
+};
+
+int usb_gadget_handle_interrupts(void)
+{
+ dwc3_uboot_handle_interrupt(0);
+ return 0;
+}
+
+int board_usb_init(int index, enum usb_init_type init)
+{
+ return dwc3_uboot_init(&dwc3_device_data);
+}
+#endif
diff --git a/configs/pinebook_pro-rk3399_defconfig b/configs/pinebook_pro-rk3399_defconfig
new file mode 100644
index 0000000000..28577256e7
--- /dev/null
+++ b/configs/pinebook_pro-rk3399_defconfig
@@ -0,0 +1,76 @@
+CONFIG_ARM=y
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_SYS_TEXT_BASE=0x00200000
+CONFIG_ROCKCHIP_RK3399=y
+CONFIG_TARGET_PINEBOOK_PRO_RK3399=y
+CONFIG_SPL_SPI_FLASH_SUPPORT=y
+CONFIG_SPL_SPI_SUPPORT=y
+CONFIG_DEBUG_UART_BASE=0xFF1A0000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_DEBUG_UART=y
+CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-pinebook-pro.dtb"
+CONFIG_MISC_INIT_R=y
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
+CONFIG_SPL_STACK_R=y
+CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000
+CONFIG_SPL_MTD_SUPPORT=y
+CONFIG_SPL_ATF=y
+CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
+CONFIG_TPL=y
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_CMD_BOOTZ=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_PMIC=y
+CONFIG_CMD_REGULATOR=y
+CONFIG_CMD_MTDPARTS=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="rk3399-pinebook-pro"
+CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
+CONFIG_ROCKCHIP_GPIO=y
+CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_BOOTDELAY=3
+CONFIG_LED=y
+CONFIG_LED_GPIO=y
+CONFIG_MISC=y
+CONFIG_ROCKCHIP_EFUSE=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_SDMA=y
+CONFIG_MMC_SDHCI_ROCKCHIP=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_GIGADEVICE=y
+CONFIG_SPI_FLASH_WINBOND=y
+CONFIG_DM_ETH=y
+CONFIG_PMIC_RK8XX=y
+CONFIG_REGULATOR_PWM=y
+CONFIG_REGULATOR_RK8XX=y
+CONFIG_PWM_ROCKCHIP=y
+CONFIG_RAM_RK3399_LPDDR4=y
+CONFIG_BAUDRATE=1500000
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_ROCKCHIP_SPI=y
+CONFIG_SYSRESET=y
+CONFIG_USB=y
+CONFIG_ROCKCHIP_USB2_PHY=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+# CONFIG_USB_XHCI_ROCKCHIP is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_GENERIC=y
+CONFIG_USB_HOST_ETHER=y
+CONFIG_USB_ETHER_ASIX=y
+CONFIG_USB_ETHER_ASIX88179=y
+CONFIG_USB_ETHER_MCS7830=y
+CONFIG_USB_ETHER_RTL8152=y
+CONFIG_USB_ETHER_SMSC95XX=y
+CONFIG_SPL_TINY_MEMSET=y
+CONFIG_ERRNO_STR=y
diff --git a/include/configs/pinebook_pro_rk3399.h b/include/configs/pinebook_pro_rk3399.h
new file mode 100644
index 0000000000..f383becbf8
--- /dev/null
+++ b/include/configs/pinebook_pro_rk3399.h
@@ -0,0 +1,29 @@
+/*
+ * Copyright (C) 2016 Rockchip Electronics Co., Ltd
+ * Copyright (C) 2019 Peter Robinson <pbrobinson at gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __PINEBOOKPRO_RK3399_H
+#define __PINEBOOKPRO_RK3399_H
+
+#define ROCKCHIP_DEVICE_SETTINGS \
+ "stdin=serial,usbkbd\0" \
+ "stdout=serial,vidconsole\0" \
+ "stderr=serial,vidconsole\0"
+
+#include <configs/rk3399_common.h>
+
+#if defined(CONFIG_ENV_IS_IN_MMC)
+#define CONFIG_SYS_MMC_ENV_DEV 0
+#elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
+#define CONFIG_ENV_SECT_SIZE (8 * 1024)
+#endif
+
+#undef CONFIG_SYS_SPI_U_BOOT_OFFS
+#define CONFIG_SYS_SPI_U_BOOT_OFFS 1024 * 512
+
+#define SDRAM_BANK_SIZE (2UL << 30)
+
+#endif
--
2.23.0
More information about the U-Boot
mailing list