[U-Boot] USB doesn't work on Rockpro64 in u-boot

Vasily Khoruzhick anarsoul at gmail.com
Thu Nov 7 07:28:59 UTC 2019


On Wed, Nov 6, 2019 at 7:48 PM Vasily Khoruzhick <anarsoul at gmail.com> wrote:
>
> On Wed, Nov 6, 2019 at 8:50 AM Jagan Teki <jagan at amarulasolutions.com> wrote:
> >
> > Hi Vasily,
> >
> > On Wed, Nov 6, 2019 at 9:17 AM Vasily Khoruzhick <anarsoul at gmail.com> wrote:
> > >
> > > Hi Akash, Jagan,
> > >
> > > Looks like USB is not functional in u-boot on Rockpro64. u-boot is
> > > from git, commit 680023c5fab6b1777c0c6f2e76e5d2effb7903a0.
> > >
> > > I'm using u-boot SPL and mainline ATF
> > > (19adcb415c313d656324d54e7608cdc7d7a5c414 is ATF commit)
> > >
> > > 'usb start' doesn't detect anything but hubs and looks like there's no
> > > power on USB ports:
> > >
> > > => usb start
> > > starting USB...
> > > Bus usb at fe380000: USB EHCI 1.00
> > > Bus usb at fe3c0000: USB EHCI 1.00
> > > Bus dwc3: Register 2000140 NbrPorts 2
> > > Starting the controller
> > > USB XHCI 1.10
> > > Bus dwc3: Register 2000140 NbrPorts 2
> > > Starting the controller
> > > USB XHCI 1.10
> > > scanning bus usb at fe380000 for devices... 1 USB Device(s) found
> > > scanning bus usb at fe3c0000 for devices... 1 USB Device(s) found
> > > scanning bus dwc3 for devices... 1 USB Device(s) found
> > > scanning bus dwc3 for devices... 1 USB Device(s) found
> > >        scanning usb for storage devices... 0 Storage Device(s) found
> > >
> > > => usb tree
> > > USB device tree:
> > >   1  Hub (480 Mb/s, 0mA)
> > >      u-boot EHCI Host Controller
> > >
> > >   1  Hub (480 Mb/s, 0mA)
> > >      u-boot EHCI Host Controller
> > >
> > >   1  Hub (5 Gb/s, 0mA)
> > >      U-Boot XHCI Host Controller
> > >
> > >   1  Hub (5 Gb/s, 0mA)
> > >      U-Boot XHCI Host Controller
> > >
> > > Regulators were probed correctly according to 'dm tree':
> > >
> > >  regulator    14  [ + ]   fixed regulator       |-- vcc12v-dcin
> > >  regulator    15  [ + ]   fixed regulator       |-- vcc1v8-s3
> > >  regulator    16  [ + ]   fixed regulator       |-- vcc3v3-pcie-regulator
> > >  regulator    17  [ + ]   fixed regulator       |-- vcc3v3-sys
> > >  regulator    18  [ + ]   fixed regulator       |-- vcc5v0-host-regulator
> > >  regulator    19  [ + ]   fixed regulator       |-- vcc5v0-typec-regulator
> > >  regulator    20  [ + ]   fixed regulator       |-- vcc5v0-sys
> > >  regulator    21  [ + ]   fixed regulator       |-- vcc5v0-usb
> > >  regulator    22  [ + ]   pwm_regulator         `-- vdd-log
> > >
> > > Any ideas what can be wrong? Have it worked before?
> >
> > I remember my last checking, give me sometime will check it on master
> > and update you.
>
> Looks like gpio clock is not enabled anywhere in u-boot for rk3399, so
> gpios just don't work.

I was wrong about clock, it appears that set bin in CRU is disabled
clock. Yet GPIOs don't work in u-boot, e.g.

=> gpio set 154
gpio: pin 154 (gpio 154) value is 1
   Warning: value of pin is still 0

154 is vcc5v0-host-regulator.gpio.

> rk3399 clock driver is very rudimentary and doesn't touch clock gates at all.
>
> Can anyone explain how it's supposed to work?
>
> >
> > Jagan.


More information about the U-Boot mailing list