[U-Boot] [PATCH 3/9] phy: atheros: ar8035: remove extra delay config

[Joe Hershberger]

On Fri, Oct 25, 2019 at 7:29 PM Michael Walle <michael at walle.cc> wrote:
>
> Remove the hard-coded delay configuration. The AR8035 config() always
> enabled the TX delay mode, although it will be set according to the PHY
> interface mode, too.
>
> If bisecting shows that this commit breaks your board you probably have
> a wrong PHY interface mode. You probably want the
> PHY_INTERFACE_MODE_RGMII_TXID or PHY_INTERFACE_MODE_RGMII_ID mode.
>
> Signed-off-by: Michael Walle <michael at walle.cc>

Acked-by: Joe Hershberger <joe.hershberger at ni.com>