[U-Boot] [PATCH 1/2] rockchip: allow DRAM init in SPL and fix ordering
Thomas Hebb
tommyhebb at gmail.com
Sun Nov 10 16:25:32 UTC 2019
b7abef2ecbcc ("rockchip: rk3399: Migrate to use common spl board file")
removed SoC-specific code for RK3399's SPL and in the process introduced
two regressions:
1. It caused the previously-unconditional DRAM initialization in
board_init_f() to only happen when compiling a configuration that
did not support TPL, meaning DRAM would never get initialized if TPL
was supported but disabled.
2. It reordered the DRAM initialization before rockchip_stimer_init(),
which as far as I can tell causes RK3399 to lock up completely.
Fix both of these issues in the common code so that we can again boot
RK3399 without a TPL. This fixes custom configurations that have
disabled TPL, and it should also unbreak the "ficus-rk3399",
"rock960-rk3399", and "chromebook_bob" defconfigs, although since I
don't have any of those devices I can't confirm they're broken now.
Signed-off-by: Thomas Hebb <tommyhebb at gmail.com>
---
arch/arm/mach-rockchip/spl.c | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/arch/arm/mach-rockchip/spl.c b/arch/arm/mach-rockchip/spl.c
index 92102b39e7..089f0a5258 100644
--- a/arch/arm/mach-rockchip/spl.c
+++ b/arch/arm/mach-rockchip/spl.c
@@ -103,7 +103,7 @@ __weak int arch_cpu_init(void)
void board_init_f(ulong dummy)
{
int ret;
-#if !defined(CONFIG_SUPPORT_TPL) || defined(CONFIG_SPL_OS_BOOT)
+#if !defined(CONFIG_TPL) || defined(CONFIG_SPL_OS_BOOT)
struct udevice *dev;
#endif
@@ -128,20 +128,20 @@ void board_init_f(ulong dummy)
hang();
}
arch_cpu_init();
-#if !defined(CONFIG_SUPPORT_TPL) || defined(CONFIG_SPL_OS_BOOT)
- debug("\nspl:init dram\n");
- ret = uclass_get_device(UCLASS_RAM, 0, &dev);
- if (ret) {
- printf("DRAM init failed: %d\n", ret);
- return;
- }
-#endif
#if !defined(CONFIG_ROCKCHIP_RK3188)
rockchip_stimer_init();
#endif
#ifdef CONFIG_SYS_ARCH_TIMER
/* Init ARM arch timer in arch/arm/cpu/armv7/arch_timer.c */
timer_init();
+#endif
+#if !defined(CONFIG_TPL) || defined(CONFIG_SPL_OS_BOOT)
+ debug("\nspl:init dram\n");
+ ret = uclass_get_device(UCLASS_RAM, 0, &dev);
+ if (ret) {
+ printf("DRAM init failed: %d\n", ret);
+ return;
+ }
#endif
preloader_console_init();
}
--
2.23.0
More information about the U-Boot
mailing list