[U-Boot] [PATCH 3/4] configs: sama5d27_wlsom1_ek: qspiflash: Enable SPI NOR ethaddr retrieval

[Tudor.Ambarus at microchip.com]

From: Tudor Ambarus <tudor.ambarus at microchip.com>

CONFIG_SPI_FLASH_SFDP_SUPPORT enables the SFDP Vendor parser,
and for the Microchip case, the retrieval of the ethaddr from
the SPI NOR flash.

Signed-off-by: Tudor Ambarus <tudor.ambarus at microchip.com>
---
 configs/sama5d27_wlsom1_ek_qspiflash_defconfig | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/configs/sama5d27_wlsom1_ek_qspiflash_defconfig b/configs/sama5d27_wlsom1_ek_qspiflash_defconfig
index 82568e286d81..e7a9cc302d3e 100644
--- a/configs/sama5d27_wlsom1_ek_qspiflash_defconfig
+++ b/configs/sama5d27_wlsom1_ek_qspiflash_defconfig
@@ -31,8 +31,8 @@ CONFIG_SPL_SEPARATE_BSS=y
 CONFIG_SPL_DISPLAY_PRINT=y
 # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set
 CONFIG_SPL_SPI_LOAD=y
-CONFIG_SPL_AT91_MCK_BYPASS=y
 CONFIG_SYS_SPI_U_BOOT_OFFS=0x40000
+CONFIG_SPL_AT91_MCK_BYPASS=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_BOOTZ=y
 # CONFIG_CMD_FLASH is not set
@@ -80,6 +80,7 @@ CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH=y
 CONFIG_SF_DEFAULT_BUS=2
 CONFIG_SF_DEFAULT_SPEED=50000000
+CONFIG_SPI_FLASH_SFDP_SUPPORT=y
 CONFIG_SPI_FLASH_ATMEL=y
 CONFIG_SPI_FLASH_MACRONIX=y
 CONFIG_SPI_FLASH_SPANSION=y
-- 
2.9.5