[U-Boot] [PATCH 4/4] configs: sama5d27_wlsom1_ek: mmc: Enable SPI NOR ethaddr retrieval

[Tudor.Ambarus at microchip.com]

From: Tudor Ambarus <tudor.ambarus at microchip.com>

Enable the SPI NOR SFDP support and the Microchip QSPI driver.
CONFIG_SPI_FLASH_SFDP_SUPPORT enables the SFDP Vendor parser,
and for the Microchip case, the retrieval of the ethaddr from
the SPI NOR flash.

While touching the SPI NOR logic, sync with the
sama5d27_wlsom1_ek_qspiflash_defconfig and enable
CONFIG_SPI_FLASH_SPANSION.

Signed-off-by: Tudor Ambarus <tudor.ambarus at microchip.com>
---
 configs/sama5d27_wlsom1_ek_mmc_defconfig | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/configs/sama5d27_wlsom1_ek_mmc_defconfig b/configs/sama5d27_wlsom1_ek_mmc_defconfig
index 50a8a8e83ccb..0b2b480e338a 100644
--- a/configs/sama5d27_wlsom1_ek_mmc_defconfig
+++ b/configs/sama5d27_wlsom1_ek_mmc_defconfig
@@ -17,6 +17,7 @@ CONFIG_DEBUG_UART_CLOCK=82000000
 CONFIG_SPL_FS_FAT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_DEBUG_UART=y
+CONFIG_SPL_TEXT_BASE=0x200000
 CONFIG_ENV_VARS_UBOOT_CONFIG=y
 CONFIG_FIT=y
 CONFIG_SYS_EXTRA_OPTIONS="SAMA5D2"
@@ -26,7 +27,6 @@ CONFIG_USE_BOOTARGS=y
 CONFIG_MISC_INIT_R=y
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
-CONFIG_SPL_TEXT_BASE=0x200000
 CONFIG_SPL_SEPARATE_BSS=y
 CONFIG_SPL_DISPLAY_PRINT=y
 # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set
@@ -67,8 +67,12 @@ CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_ATMEL=y
 CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH=y
+CONFIG_SF_DEFAULT_BUS=2
+CONFIG_SF_DEFAULT_SPEED=50000000
+CONFIG_SPI_FLASH_SFDP_SUPPORT=y
 CONFIG_SPI_FLASH_ATMEL=y
 CONFIG_SPI_FLASH_MACRONIX=y
+CONFIG_SPI_FLASH_SPANSION=y
 CONFIG_SPI_FLASH_STMICRO=y
 CONFIG_SPI_FLASH_SST=y
 CONFIG_PHY_MICREL=y
@@ -83,6 +87,7 @@ CONFIG_DEBUG_UART_ANNOUNCE=y
 CONFIG_ATMEL_USART=y
 CONFIG_SPI=y
 CONFIG_DM_SPI=y
+CONFIG_ATMEL_QSPI=y
 CONFIG_TIMER=y
 CONFIG_SPL_TIMER=y
 CONFIG_ATMEL_PIT_TIMER=y
-- 
2.9.5