[U-Boot] [PATCH 2/3] imx: add the i.MX8M reset controller node

[Fabio Estevam]

Hi Patrick,

On Thu, Oct 3, 2019 at 11:12 AM Patrick Wildt <patrick at blueri.se> wrote:
>
> This patch adds the reset controller node to the i.MX8MQ SoC
> device tree.
>
> Signed-off-by: Patrick Wildt <patrick at blueri.se>
> ---
>  arch/arm/dts/fsl-imx8mq.dtsi | 7 +++++++
>  1 file changed, 7 insertions(+)
>
> diff --git a/arch/arm/dts/fsl-imx8mq.dtsi b/arch/arm/dts/fsl-imx8mq.dtsi
> index c35c23e293..d843b401be 100644
> --- a/arch/arm/dts/fsl-imx8mq.dtsi
> +++ b/arch/arm/dts/fsl-imx8mq.dtsi
> @@ -19,6 +19,7 @@
>  #include <dt-bindings/input/input.h>
>  #include <dt-bindings/interrupt-controller/arm-gic.h>
>  #include <dt-bindings/pinctrl/pins-imx8mq.h>
> +#include <dt-bindings/reset/imx8mq-reset.h>
>  #include <dt-bindings/thermal/thermal.h>
>
>  / {
> @@ -269,6 +270,12 @@
>                 #clock-cells = <1>;
>         };
>
> +       src: reset-controller at 30390000 {
> +               compatible = "fsl,imx8mq-src", "syscon";
> +               reg = <0x0 0x30390000 0x0 0x10000>;
> +               #reset-cells = <1>;

This reset-controller node is already part of the upstream kernel imx8mq.dtsi.

What about syncing the U-Boot version with the one from kernel 5.3.2?
Also, please note the dtsi name change.

Thanks

> +       };
> +
>         gpc: gpc at 303a0000 {
>                 compatible = "fsl,imx8mq-gpc", "fsl,imx7d-gpc", "syscon";
>                 reg = <0x0 0x303a0000 0x0 0x10000>;
> --
> 2.23.0
>