[U-Boot] [PATCH 0/2] Fix memory instability on ROCK64

[Simon South]

These two patches fix small issues with the Rockchip RK3328 SDRAM
driver that prevented my PINE64 ROCK64 from booting and running
normally using U-Boot's TPL [1].

The first patch updates the phy_dll_bypass_set() function to use the
correct units for its DDR-frequency parameter, which is already
specified in MHz and does not need converting. This issue caused the
DRAM controller to be misconfigured for all but the lowest memory
speeds.

The second patch fixes an apparent typo in phy_cfg() that caused the
DRAM controller's deskew registers to be loaded with incorrect values:
Instead of copying from the second 44-element portion of the
skew-value array the driver instead re-used a portion of the first.
This also produced instability.

With both these patches applied my ROCK64 boots and runs normally
using the U-Boot TPL and a memory frequency of either 800 or 933 MHz:
In both cases the "mtest" memory-test command runs indefinitely
without error, and I can boot into NetBSD successfully without the
kernel hanging or panicking.

[1] https://lists.denx.de/pipermail/u-boot/2019-September/384076.html

Simon South (2):
  ram: rk3328: Use correct frequency units in function
  ram: rk3328: Fix loading of skew values

 drivers/ram/rockchip/sdram_rk3328.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

-- 
2.23.0