[U-Boot] [PATCH 1/2] ram: rk3328: Use correct frequency units in function

[Simon South]

Fix a pair of tests in phy_dll_bypass_set() that used incorrect units
for the DDR frequency, causing the DRAM controller to be misconfigured
in most cases.

Signed-off-by: Simon South <simon at simonsouth.net>
---
 drivers/ram/rockchip/sdram_rk3328.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/ram/rockchip/sdram_rk3328.c b/drivers/ram/rockchip/sdram_rk3328.c
index 656696ac3c..0541bbadf0 100644
--- a/drivers/ram/rockchip/sdram_rk3328.c
+++ b/drivers/ram/rockchip/sdram_rk3328.c
@@ -311,12 +311,12 @@ static void phy_dll_bypass_set(struct dram_info *dram, u32 freq)
 	setbits_le32(PHY_REG(phy_base, 0x56), 1 << 4);
 	clrbits_le32(PHY_REG(phy_base, 0x57), 1 << 3);
 
-	if (freq <= (400 * MHz))
+	if (freq <= 400)
 		/* DLL bypass */
 		setbits_le32(PHY_REG(phy_base, 0xa4), 0x1f);
 	else
 		clrbits_le32(PHY_REG(phy_base, 0xa4), 0x1f);
-	if (freq <= (680 * MHz))
+	if (freq <= 680)
 		tmp = 2;
 	else
 		tmp = 1;
-- 
2.23.0