[U-Boot] mx6cuboxi fails to load u-boot.img

Stefano Babic sbabic at denx.de
Tue Oct 8 10:18:39 UTC 2019


Hi everybody,

thanks for deep analyses (I just jump at the end):

On 08/10/19 12:03, Peter Robinson wrote:
>> On Thu, Sep 26, 2019 at 05:07:21PM -0300, Fabio Estevam wrote:
>>> Hi Vagrant,
>>>
>>> On Thu, Sep 26, 2019 at 4:16 PM Vagrant Cascadian <vagrant at debian.org> wrote:
>>>>
>>>> I just tested mx6cuboxi with 2019.10-rc4, and it fails to load
>>>> u-boot.img from MMC:
>>>>
>>>> 1 2019-09-26_17:31:27.63089 U-Boot SPL 2019.10-rc4+dfsg-1 (Sep 24 2019 -
>>>> 08:03:23 +0000)
>>>> 2 2019-09-26_17:31:27.63092 Trying to boot from MMC2
>>>> 3 2019-09-26_17:31:27.63095 MMC Device 1 not found
>>>> 4 2019-09-26_17:31:27.63097 spl: could not find mmc device 1. error: -19
>>>> 5 2019-09-26_17:31:27.63099 SPL: failed to boot from all boot devices
>>>> 6 2019-09-26_17:31:27.63101 ### ERROR ### Please RESET the board ###
>>>
>>> Thanks for reporting this issue.
>>>
>>> Unfortunately, I don't have access to my Cuboxi, so I am adding Jon
>>> and Baruch on Cc.
>>
>> Works after reverting the following commit.
> 
> For reference reverting this on 2019.10 fixed my issues with the udoo_neo board.
> 
>> 14d319b1856b86e593e01abd0a1e3c2d63b52a8a is the first bad commit
>> commit 14d319b1856b86e593e01abd0a1e3c2d63b52a8a
>> Author: Adam Ford <aford173 at gmail.com>
>> Date:   Thu May 23 14:11:30 2019 -0500
>>
>>     spl: imx6: Let spl_boot_device return USDHC1 or USDHC2
>>
>>     Currently, when the spl_boot_device checks the boot device, it
>>     will only return MMC1 when it's either sd or eMMC regardless
>>     of whether or not it's MMC1 or MMC2.  This is a problem when
>>     booting from MMC2 if MMC isn't being manually configured like in
>>     the DM_SPL case with SPL_OF_CONTROL.
>>
>>     This patch will check the register and return either MMC1 or MMC2.
>>
>>     Signed-off-by: Adam Ford <aford173 at gmail.com>
>>

I tend to revert the pathc and let the "standard" case working. A board
maintainer coould add a board_boot_order() function to still overwrite
the behavior of spl_boot_device().

Regards,
Stefano


-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================


More information about the U-Boot mailing list