[U-Boot] mx6cuboxi fails to load u-boot.img
aford173 at gmail.com
Tue Oct 8 10:42:48 UTC 2019
On Tue, Oct 8, 2019 at 5:19 AM Stefano Babic <sbabic at denx.de> wrote:
> Hi everybody,
> thanks for deep analyses (I just jump at the end):
> On 08/10/19 12:03, Peter Robinson wrote:
> >> On Thu, Sep 26, 2019 at 05:07:21PM -0300, Fabio Estevam wrote:
> >>> Hi Vagrant,
> >>> On Thu, Sep 26, 2019 at 4:16 PM Vagrant Cascadian <vagrant at debian.org> wrote:
> >>>> I just tested mx6cuboxi with 2019.10-rc4, and it fails to load
> >>>> u-boot.img from MMC:
> >>>> 1 2019-09-26_17:31:27.63089 U-Boot SPL 2019.10-rc4+dfsg-1 (Sep 24 2019 -
> >>>> 08:03:23 +0000)
> >>>> 2 2019-09-26_17:31:27.63092 Trying to boot from MMC2
> >>>> 3 2019-09-26_17:31:27.63095 MMC Device 1 not found
> >>>> 4 2019-09-26_17:31:27.63097 spl: could not find mmc device 1. error: -19
> >>>> 5 2019-09-26_17:31:27.63099 SPL: failed to boot from all boot devices
> >>>> 6 2019-09-26_17:31:27.63101 ### ERROR ### Please RESET the board ###
> >>> Thanks for reporting this issue.
> >>> Unfortunately, I don't have access to my Cuboxi, so I am adding Jon
> >>> and Baruch on Cc.
> >> Works after reverting the following commit.
> > For reference reverting this on 2019.10 fixed my issues with the udoo_neo board.
> >> 14d319b1856b86e593e01abd0a1e3c2d63b52a8a is the first bad commit
> >> commit 14d319b1856b86e593e01abd0a1e3c2d63b52a8a
> >> Author: Adam Ford <aford173 at gmail.com>
> >> Date: Thu May 23 14:11:30 2019 -0500
> >> spl: imx6: Let spl_boot_device return USDHC1 or USDHC2
> >> Currently, when the spl_boot_device checks the boot device, it
> >> will only return MMC1 when it's either sd or eMMC regardless
> >> of whether or not it's MMC1 or MMC2. This is a problem when
> >> booting from MMC2 if MMC isn't being manually configured like in
> >> the DM_SPL case with SPL_OF_CONTROL.
> >> This patch will check the register and return either MMC1 or MMC2.
> >> Signed-off-by: Adam Ford <aford173 at gmail.com>
> I tend to revert the pathc and let the "standard" case working. A board
> maintainer coould add a board_boot_order() function to still overwrite
> the behavior of spl_boot_device().
I will revert this and the rest of the series that goes with it. I
just need some time to wake up and test it. I'll have something in a
> DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
> U-Boot mailing list
> U-Boot at lists.denx.de
More information about the U-Boot