[U-Boot] [PATCH v2 4/5] imx: nandbcb: refactor update function
Igor Opaniuk
igor.opaniuk at gmail.com
Mon Oct 21 13:38:58 UTC 2019
From: Igor Opaniuk <igor.opaniuk at toradex.com>
Move code for writing FCB/DBBT pages to a separate function
Signed-off-by: Igor Opaniuk <igor.opaniuk at toradex.com>
---
arch/arm/mach-imx/cmd_nandbcb.c | 221 ++++++++++++++++++--------------
1 file changed, 122 insertions(+), 99 deletions(-)
diff --git a/arch/arm/mach-imx/cmd_nandbcb.c b/arch/arm/mach-imx/cmd_nandbcb.c
index aae2cc82f3..fbe780ccda 100644
--- a/arch/arm/mach-imx/cmd_nandbcb.c
+++ b/arch/arm/mach-imx/cmd_nandbcb.c
@@ -64,7 +64,8 @@ static u32 calc_chksum(void *buf, size_t size)
return ~chksum;
}
-static void fill_fcb(struct fcb_block *fcb, struct mtd_info *mtd)
+static void fill_fcb(struct fcb_block *fcb, struct mtd_info *mtd,
+ u32 fw1_start, u32 fw2_start, u32 fw_pages)
{
struct nand_chip *chip = mtd_to_nand(mtd);
struct mxs_nand_info *nand_info = nand_get_controller_data(chip);
@@ -112,6 +113,11 @@ static void fill_fcb(struct fcb_block *fcb, struct mtd_info *mtd)
fcb->disbbm = 0;
fcb->disbbm_search = 0;
+ fcb->fw1_start = fw1_start; /* Firmware image starts on this sector */
+ fcb->fw2_start = fw2_start; /* Secondary FW Image starting Sector */
+ fcb->fw1_pages = fw_pages; /* Number of sectors in firmware image */
+ fcb->fw2_pages = fw_pages; /* Number of sector in secondary FW image */
+
fcb->checksum = calc_chksum((void *)fcb + 4, sizeof(*fcb) - 4);
}
@@ -135,6 +141,109 @@ static int dbbt_fill_data(struct mtd_info *mtd, void *buf, int num_blocks)
return n_bad_blocks;
}
+static int write_fcb_dbbt(struct mtd_info *mtd, struct fcb_block *fcb,
+ struct dbbt_block *dbbt, void *dbbt_data_page,
+ loff_t off)
+{
+ void *fcb_raw_page = 0;
+ int i, ret;
+ size_t dummy;
+
+ /*
+ * We prepare raw page only for i.MX6, for i.MX7 we
+ * leverage BCH hw module instead
+ */
+ if (is_mx6()) {
+ /* write fcb/dbbt */
+ fcb_raw_page = kzalloc(mtd->writesize + mtd->oobsize,
+ GFP_KERNEL);
+ if (!fcb_raw_page) {
+ debug("failed to allocate fcb_raw_page\n");
+ ret = -ENOMEM;
+ return ret;
+ }
+
+ memcpy(fcb_raw_page + 12, fcb, sizeof(struct fcb_block));
+ encode_hamming_13_8(fcb_raw_page + 12, fcb_raw_page +
+ 12 + 512, 512);
+ /*
+ * Set the first and second byte of OOB data to 0xFF,
+ * not 0x00. These bytes are used as the Manufacturers Bad
+ * Block Marker (MBBM). Since the FCB is mostly written to
+ * the first page in a block, a scan for
+ * factory bad blocks will detect these blocks as bad, e.g.
+ * when function nand_scan_bbt() is executed to build a new
+ * bad block table.
+ */
+ memset(fcb_raw_page + mtd->writesize, 0xFF, 2);
+ }
+ for (i = 0; i < 2; i++) {
+ if (mtd_block_isbad(mtd, off)) {
+ printf("Block %d is bad, skipped\n", i);
+ continue;
+ }
+
+ /*
+ * User BCH ECC hardware module for i.MX7
+ */
+ if (is_mx7()) {
+ u32 off = i * mtd->erasesize;
+ size_t rwsize = sizeof(*fcb);
+
+ printf("Writing %d bytes to 0x%x: ", rwsize, off);
+
+ /* switch nand BCH to FCB compatible settings */
+ mxs_nand_mode_fcb(mtd);
+ ret = nand_write(mtd, off, &rwsize,
+ (unsigned char *)fcb);
+ mxs_nand_mode_normal(mtd);
+
+ printf("%s\n", ret ? "ERROR" : "OK");
+ } else if (is_mx6()) {
+ /* raw write */
+ mtd_oob_ops_t ops = {
+ .datbuf = (u8 *)fcb_raw_page,
+ .oobbuf = ((u8 *)fcb_raw_page) +
+ mtd->writesize,
+ .len = mtd->writesize,
+ .ooblen = mtd->oobsize,
+ .mode = MTD_OPS_RAW
+ };
+
+ ret = mtd_write_oob(mtd, mtd->erasesize * i, &ops);
+ if (ret)
+ goto fcb_raw_page_err;
+ debug("NAND fcb write: 0x%x offset 0x%x written: %s\n",
+ mtd->erasesize * i, ops.len, ret ?
+ "ERROR" : "OK");
+ }
+
+ ret = mtd_write(mtd, mtd->erasesize * i + mtd->writesize,
+ mtd->writesize, &dummy, (void *)dbbt);
+ if (ret)
+ goto fcb_raw_page_err;
+ debug("NAND dbbt write: 0x%x offset, 0x%x bytes written: %s\n",
+ mtd->erasesize * i + mtd->writesize, dummy,
+ ret ? "ERROR" : "OK");
+
+ /* dbbtpages == 0 if no bad blocks */
+ if (dbbt->dbbtpages > 0) {
+ loff_t to = (mtd->erasesize * i + mtd->writesize * 5);
+
+ ret = mtd_write(mtd, to, mtd->writesize, &dummy,
+ dbbt_data_page);
+ if (ret)
+ goto fcb_raw_page_err;
+ }
+ }
+
+fcb_raw_page_err:
+ if (is_mx6())
+ kfree(fcb_raw_page);
+
+ return ret;
+}
+
static int nandbcb_update(struct mtd_info *mtd, loff_t off, size_t size,
size_t maxsize, const u_char *buf)
{
@@ -142,12 +251,12 @@ static int nandbcb_update(struct mtd_info *mtd, loff_t off, size_t size,
struct fcb_block *fcb;
struct dbbt_block *dbbt;
loff_t fw1_off;
- void *fwbuf, *fcb_raw_page, *dbbt_page, *dbbt_data_page;
+ void *fwbuf, *dbbt_page, *dbbt_data_page;
+ u32 fw1_start, fw1_pages;
int nr_blks, nr_blks_fcb, fw1_blk;
- size_t fwsize, dummy;
- int i, ret;
+ size_t fwsize;
+ int ret;
- fcb_raw_page = 0;
/* erase */
memset(&opts, 0, sizeof(opts));
opts.offset = off;
@@ -209,9 +318,9 @@ static int nandbcb_update(struct mtd_info *mtd, loff_t off, size_t size,
goto fwbuf_err;
}
- fcb->fw1_start = (fw1_blk * mtd->erasesize) / mtd->writesize;
- fcb->fw1_pages = size / mtd->writesize + 1;
- fill_fcb(fcb, mtd);
+ fw1_start = (fw1_blk * mtd->erasesize) / mtd->writesize;
+ fw1_pages = size / mtd->writesize + 1;
+ fill_fcb(fcb, mtd, fw1_start, 0, fw1_pages);
/* fill dbbt */
dbbt_page = kzalloc(mtd->writesize, GFP_KERNEL);
@@ -238,97 +347,11 @@ static int nandbcb_update(struct mtd_info *mtd, loff_t off, size_t size,
else if (ret > 0)
dbbt->dbbtpages = 1;
- /*
- * We prepare raw page only for i.MX6, for i.MX7 we
- * leverage BCH hw module instead
- */
- if (is_mx6()) {
- /* write fcb/dbbt */
- fcb_raw_page = kzalloc(mtd->writesize + mtd->oobsize,
- GFP_KERNEL);
- if (!fcb_raw_page) {
- debug("failed to allocate fcb_raw_page\n");
- ret = -ENOMEM;
- goto dbbt_data_page_err;
- }
-
- memcpy(fcb_raw_page + 12, fcb, sizeof(struct fcb_block));
- encode_hamming_13_8(fcb_raw_page + 12, fcb_raw_page +
- 12 + 512, 512);
- /*
- * Set the first and second byte of OOB data to 0xFF,
- * not 0x00. These bytes are used as the Manufacturers Bad
- * Block Marker (MBBM). Since the FCB is mostly written to
- * the first page in a block, a scan for
- * factory bad blocks will detect these blocks as bad, e.g.
- * when function nand_scan_bbt() is executed to build a new
- * bad block table.
- */
- memset(fcb_raw_page + mtd->writesize, 0xFF, 2);
- }
- for (i = 0; i < nr_blks_fcb; i++) {
- if (mtd_block_isbad(mtd, off)) {
- printf("Block %d is bad, skipped\n", i);
- continue;
- }
-
- /*
- * User BCH ECC hardware module for i.MX7
- */
- if (is_mx7()) {
- u32 off = i * mtd->erasesize;
- size_t rwsize = sizeof(*fcb);
-
- printf("Writing %d bytes to 0x%x: ", rwsize, off);
-
- /* switch nand BCH to FCB compatible settings */
- mxs_nand_mode_fcb(mtd);
- ret = nand_write(mtd, off, &rwsize,
- (unsigned char *)fcb);
- mxs_nand_mode_normal(mtd);
-
- printf("%s\n", ret ? "ERROR" : "OK");
- } else if (is_mx6()) {
- /* raw write */
- mtd_oob_ops_t ops = {
- .datbuf = (u8 *)fcb_raw_page,
- .oobbuf = ((u8 *)fcb_raw_page) +
- mtd->writesize,
- .len = mtd->writesize,
- .ooblen = mtd->oobsize,
- .mode = MTD_OPS_RAW
- };
-
- ret = mtd_write_oob(mtd, mtd->erasesize * i, &ops);
- if (ret)
- goto fcb_raw_page_err;
- debug("NAND fcb write: 0x%x offset 0x%x written: %s\n",
- mtd->erasesize * i, ops.len, ret ?
- "ERROR" : "OK");
- }
-
- ret = mtd_write(mtd, mtd->erasesize * i + mtd->writesize,
- mtd->writesize, &dummy, dbbt_page);
- if (ret)
- goto fcb_raw_page_err;
- debug("NAND dbbt write: 0x%x offset, 0x%x bytes written: %s\n",
- mtd->erasesize * i + mtd->writesize, dummy,
- ret ? "ERROR" : "OK");
-
- /* dbbtpages == 0 if no bad blocks */
- if (dbbt->dbbtpages > 0) {
- loff_t to = (mtd->erasesize * i + mtd->writesize * 5);
-
- ret = mtd_write(mtd, to, mtd->writesize, &dummy,
- dbbt_data_page);
- if (ret)
- goto fcb_raw_page_err;
- }
- }
+ /* write fcb and dbbt to nand */
+ ret = write_fcb_dbbt(mtd, fcb, dbbt, dbbt_data_page, off);
+ if (ret < 0)
+ printf("failed to write FCB/DBBT\n");
-fcb_raw_page_err:
- if (is_mx6())
- kfree(fcb_raw_page);
dbbt_data_page_err:
kfree(dbbt_data_page);
dbbt_page_err:
@@ -355,7 +378,7 @@ static int do_nandbcb_update(int argc, char * const argv[])
dev = nand_curr_device;
if (dev < 0) {
- printf("failed to get nand_curr_device, run nand device");
+ printf("failed to get nand_curr_device, run nand device\n");
return CMD_RET_FAILURE;
}
--
2.17.1
More information about the U-Boot
mailing list