[U-Boot] [PATCH v2 4/5] imx: nandbcb: refactor update function

Oleksandr Suvorov oleksandr.suvorov at toradex.com
Wed Oct 23 11:26:23 UTC 2019


On Mon, Oct 21, 2019 at 4:41 PM Igor Opaniuk <igor.opaniuk at gmail.com> wrote:
>
> From: Igor Opaniuk <igor.opaniuk at toradex.com>
>
> Move code for writing FCB/DBBT pages to a separate function
>
> Signed-off-by: Igor Opaniuk <igor.opaniuk at toradex.com>

Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov at toradex.com>

> ---
>
>  arch/arm/mach-imx/cmd_nandbcb.c | 221 ++++++++++++++++++--------------
>  1 file changed, 122 insertions(+), 99 deletions(-)
>
> diff --git a/arch/arm/mach-imx/cmd_nandbcb.c b/arch/arm/mach-imx/cmd_nandbcb.c
> index aae2cc82f3..fbe780ccda 100644
> --- a/arch/arm/mach-imx/cmd_nandbcb.c
> +++ b/arch/arm/mach-imx/cmd_nandbcb.c
> @@ -64,7 +64,8 @@ static u32 calc_chksum(void *buf, size_t size)
>         return ~chksum;
>  }
>
> -static void fill_fcb(struct fcb_block *fcb, struct mtd_info *mtd)
> +static void fill_fcb(struct fcb_block *fcb, struct mtd_info *mtd,
> +                    u32 fw1_start, u32 fw2_start, u32 fw_pages)
>  {
>         struct nand_chip *chip = mtd_to_nand(mtd);
>         struct mxs_nand_info *nand_info = nand_get_controller_data(chip);
> @@ -112,6 +113,11 @@ static void fill_fcb(struct fcb_block *fcb, struct mtd_info *mtd)
>         fcb->disbbm = 0;
>         fcb->disbbm_search = 0;
>
> +       fcb->fw1_start = fw1_start; /* Firmware image starts on this sector */
> +       fcb->fw2_start = fw2_start; /* Secondary FW Image starting Sector */
> +       fcb->fw1_pages = fw_pages; /* Number of sectors in firmware image */
> +       fcb->fw2_pages = fw_pages; /* Number of sector in secondary FW image */
> +
>         fcb->checksum = calc_chksum((void *)fcb + 4, sizeof(*fcb) - 4);
>  }
>
> @@ -135,6 +141,109 @@ static int dbbt_fill_data(struct mtd_info *mtd, void *buf, int num_blocks)
>         return n_bad_blocks;
>  }
>
> +static int write_fcb_dbbt(struct mtd_info *mtd, struct fcb_block *fcb,
> +                         struct dbbt_block *dbbt, void *dbbt_data_page,
> +                         loff_t off)
> +{
> +       void *fcb_raw_page = 0;
> +       int i, ret;
> +       size_t dummy;
> +
> +       /*
> +        * We prepare raw page only for i.MX6, for i.MX7 we
> +        * leverage BCH hw module instead
> +        */
> +       if (is_mx6()) {
> +               /* write fcb/dbbt */
> +               fcb_raw_page = kzalloc(mtd->writesize + mtd->oobsize,
> +                                      GFP_KERNEL);
> +               if (!fcb_raw_page) {
> +                       debug("failed to allocate fcb_raw_page\n");
> +                       ret = -ENOMEM;
> +                       return ret;
> +               }
> +
> +               memcpy(fcb_raw_page + 12, fcb, sizeof(struct fcb_block));
> +               encode_hamming_13_8(fcb_raw_page + 12, fcb_raw_page +
> +                                   12 + 512, 512);
> +               /*
> +                * Set the first and second byte of OOB data to 0xFF,
> +                * not 0x00. These bytes are used as the Manufacturers Bad
> +                * Block Marker (MBBM). Since the FCB is mostly written to
> +                * the first page in a block, a scan for
> +                * factory bad blocks will detect these blocks as bad, e.g.
> +                * when function nand_scan_bbt() is executed to build a new
> +                * bad block table.
> +                */
> +               memset(fcb_raw_page + mtd->writesize, 0xFF, 2);
> +       }
> +       for (i = 0; i < 2; i++) {
> +               if (mtd_block_isbad(mtd, off)) {
> +                       printf("Block %d is bad, skipped\n", i);
> +                       continue;
> +               }
> +
> +               /*
> +                * User BCH ECC hardware module for i.MX7
> +                */
> +               if (is_mx7()) {
> +                       u32 off = i * mtd->erasesize;
> +                       size_t rwsize = sizeof(*fcb);
> +
> +                       printf("Writing %d bytes to 0x%x: ", rwsize, off);
> +
> +                       /* switch nand BCH to FCB compatible settings */
> +                       mxs_nand_mode_fcb(mtd);
> +                       ret = nand_write(mtd, off, &rwsize,
> +                                        (unsigned char *)fcb);
> +                       mxs_nand_mode_normal(mtd);
> +
> +                       printf("%s\n", ret ? "ERROR" : "OK");
> +               } else if (is_mx6()) {
> +                       /* raw write */
> +                       mtd_oob_ops_t ops = {
> +                               .datbuf = (u8 *)fcb_raw_page,
> +                               .oobbuf = ((u8 *)fcb_raw_page) +
> +                                         mtd->writesize,
> +                               .len = mtd->writesize,
> +                               .ooblen = mtd->oobsize,
> +                               .mode = MTD_OPS_RAW
> +                       };
> +
> +                       ret = mtd_write_oob(mtd, mtd->erasesize * i, &ops);
> +                       if (ret)
> +                               goto fcb_raw_page_err;
> +                       debug("NAND fcb write: 0x%x offset 0x%x written: %s\n",
> +                             mtd->erasesize * i, ops.len, ret ?
> +                             "ERROR" : "OK");
> +               }
> +
> +               ret = mtd_write(mtd, mtd->erasesize * i + mtd->writesize,
> +                               mtd->writesize, &dummy, (void *)dbbt);
> +               if (ret)
> +                       goto fcb_raw_page_err;
> +               debug("NAND dbbt write: 0x%x offset, 0x%x bytes written: %s\n",
> +                     mtd->erasesize * i + mtd->writesize, dummy,
> +                     ret ? "ERROR" : "OK");
> +
> +               /* dbbtpages == 0 if no bad blocks */
> +               if (dbbt->dbbtpages > 0) {
> +                       loff_t to = (mtd->erasesize * i + mtd->writesize * 5);
> +
> +                       ret = mtd_write(mtd, to, mtd->writesize, &dummy,
> +                                       dbbt_data_page);
> +                       if (ret)
> +                               goto fcb_raw_page_err;
> +               }
> +       }
> +
> +fcb_raw_page_err:
> +       if (is_mx6())
> +               kfree(fcb_raw_page);
> +
> +       return ret;
> +}
> +
>  static int nandbcb_update(struct mtd_info *mtd, loff_t off, size_t size,
>                           size_t maxsize, const u_char *buf)
>  {
> @@ -142,12 +251,12 @@ static int nandbcb_update(struct mtd_info *mtd, loff_t off, size_t size,
>         struct fcb_block *fcb;
>         struct dbbt_block *dbbt;
>         loff_t fw1_off;
> -       void *fwbuf, *fcb_raw_page, *dbbt_page, *dbbt_data_page;
> +       void *fwbuf, *dbbt_page, *dbbt_data_page;
> +       u32 fw1_start, fw1_pages;
>         int nr_blks, nr_blks_fcb, fw1_blk;
> -       size_t fwsize, dummy;
> -       int i, ret;
> +       size_t fwsize;
> +       int ret;
>
> -       fcb_raw_page = 0;
>         /* erase */
>         memset(&opts, 0, sizeof(opts));
>         opts.offset = off;
> @@ -209,9 +318,9 @@ static int nandbcb_update(struct mtd_info *mtd, loff_t off, size_t size,
>                 goto fwbuf_err;
>         }
>
> -       fcb->fw1_start = (fw1_blk * mtd->erasesize) / mtd->writesize;
> -       fcb->fw1_pages = size / mtd->writesize + 1;
> -       fill_fcb(fcb, mtd);
> +       fw1_start = (fw1_blk * mtd->erasesize) / mtd->writesize;
> +       fw1_pages = size / mtd->writesize + 1;
> +       fill_fcb(fcb, mtd, fw1_start, 0, fw1_pages);
>
>         /* fill dbbt */
>         dbbt_page = kzalloc(mtd->writesize, GFP_KERNEL);
> @@ -238,97 +347,11 @@ static int nandbcb_update(struct mtd_info *mtd, loff_t off, size_t size,
>         else if (ret > 0)
>                 dbbt->dbbtpages = 1;
>
> -       /*
> -        * We prepare raw page only for i.MX6, for i.MX7 we
> -        * leverage BCH hw module instead
> -        */
> -       if (is_mx6()) {
> -               /* write fcb/dbbt */
> -               fcb_raw_page = kzalloc(mtd->writesize + mtd->oobsize,
> -                                      GFP_KERNEL);
> -               if (!fcb_raw_page) {
> -                       debug("failed to allocate fcb_raw_page\n");
> -                       ret = -ENOMEM;
> -                       goto dbbt_data_page_err;
> -               }
> -
> -               memcpy(fcb_raw_page + 12, fcb, sizeof(struct fcb_block));
> -               encode_hamming_13_8(fcb_raw_page + 12, fcb_raw_page +
> -                                   12 + 512, 512);
> -               /*
> -                * Set the first and second byte of OOB data to 0xFF,
> -                * not 0x00. These bytes are used as the Manufacturers Bad
> -                * Block Marker (MBBM). Since the FCB is mostly written to
> -                * the first page in a block, a scan for
> -                * factory bad blocks will detect these blocks as bad, e.g.
> -                * when function nand_scan_bbt() is executed to build a new
> -                * bad block table.
> -                */
> -               memset(fcb_raw_page + mtd->writesize, 0xFF, 2);
> -       }
> -       for (i = 0; i < nr_blks_fcb; i++) {
> -               if (mtd_block_isbad(mtd, off)) {
> -                       printf("Block %d is bad, skipped\n", i);
> -                       continue;
> -               }
> -
> -               /*
> -                * User BCH ECC hardware module for i.MX7
> -                */
> -               if (is_mx7()) {
> -                       u32 off = i * mtd->erasesize;
> -                       size_t rwsize = sizeof(*fcb);
> -
> -                       printf("Writing %d bytes to 0x%x: ", rwsize, off);
> -
> -                       /* switch nand BCH to FCB compatible settings */
> -                       mxs_nand_mode_fcb(mtd);
> -                       ret = nand_write(mtd, off, &rwsize,
> -                                        (unsigned char *)fcb);
> -                       mxs_nand_mode_normal(mtd);
> -
> -                       printf("%s\n", ret ? "ERROR" : "OK");
> -               } else if (is_mx6()) {
> -                       /* raw write */
> -                       mtd_oob_ops_t ops = {
> -                               .datbuf = (u8 *)fcb_raw_page,
> -                               .oobbuf = ((u8 *)fcb_raw_page) +
> -                                         mtd->writesize,
> -                               .len = mtd->writesize,
> -                               .ooblen = mtd->oobsize,
> -                               .mode = MTD_OPS_RAW
> -                       };
> -
> -                       ret = mtd_write_oob(mtd, mtd->erasesize * i, &ops);
> -                       if (ret)
> -                               goto fcb_raw_page_err;
> -                       debug("NAND fcb write: 0x%x offset 0x%x written: %s\n",
> -                             mtd->erasesize * i, ops.len, ret ?
> -                             "ERROR" : "OK");
> -               }
> -
> -               ret = mtd_write(mtd, mtd->erasesize * i + mtd->writesize,
> -                               mtd->writesize, &dummy, dbbt_page);
> -               if (ret)
> -                       goto fcb_raw_page_err;
> -               debug("NAND dbbt write: 0x%x offset, 0x%x bytes written: %s\n",
> -                     mtd->erasesize * i + mtd->writesize, dummy,
> -                     ret ? "ERROR" : "OK");
> -
> -               /* dbbtpages == 0 if no bad blocks */
> -               if (dbbt->dbbtpages > 0) {
> -                       loff_t to = (mtd->erasesize * i + mtd->writesize * 5);
> -
> -                       ret = mtd_write(mtd, to, mtd->writesize, &dummy,
> -                                       dbbt_data_page);
> -                       if (ret)
> -                               goto fcb_raw_page_err;
> -               }
> -       }
> +       /* write fcb and dbbt to nand */
> +       ret = write_fcb_dbbt(mtd, fcb, dbbt, dbbt_data_page, off);
> +       if (ret < 0)
> +               printf("failed to write FCB/DBBT\n");
>
> -fcb_raw_page_err:
> -       if (is_mx6())
> -               kfree(fcb_raw_page);
>  dbbt_data_page_err:
>         kfree(dbbt_data_page);
>  dbbt_page_err:
> @@ -355,7 +378,7 @@ static int do_nandbcb_update(int argc, char * const argv[])
>
>         dev = nand_curr_device;
>         if (dev < 0) {
> -               printf("failed to get nand_curr_device, run nand device");
> +               printf("failed to get nand_curr_device, run nand device\n");
>                 return CMD_RET_FAILURE;
>         }
>
> --
> 2.17.1
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> https://lists.denx.de/listinfo/u-boot



-- 
Best regards
Oleksandr Suvorov

Toradex AG
Altsagenstrasse 5 | 6048 Horw/Luzern | Switzerland | T: +41 41 500
4800 (main line)


More information about the U-Boot mailing list