[U-Boot] [PATCH V1 6/6] imx: imx8mm-evk: enable ethernet

[Peng Fan]

add phy-reset-gpios to reset phy
Add board_phy_config to configure phy
Enable DM_ETH

Signed-off-by: Peng Fan <peng.fan at nxp.com>
---
 arch/arm/dts/imx8mm-evk-u-boot.dtsi     |  4 ++++
 board/freescale/imx8mm_evk/imx8mm_evk.c | 37 +++++++++++++++++++++++++++++++++
 configs/imx8mm_evk_defconfig            |  7 +++++++
 include/configs/imx8mm_evk.h            |  8 +++++++
 4 files changed, 56 insertions(+)

diff --git a/arch/arm/dts/imx8mm-evk-u-boot.dtsi b/arch/arm/dts/imx8mm-evk-u-boot.dtsi
index f62a7cf97d..3502602fbb 100644
--- a/arch/arm/dts/imx8mm-evk-u-boot.dtsi
+++ b/arch/arm/dts/imx8mm-evk-u-boot.dtsi
@@ -113,3 +113,7 @@
 &pinctrl_pmic {
 	u-boot,dm-spl;
 };
+
+&fec1 {
+	phy-reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+};
diff --git a/board/freescale/imx8mm_evk/imx8mm_evk.c b/board/freescale/imx8mm_evk/imx8mm_evk.c
index e4742338e3..a0af550f5e 100644
--- a/board/freescale/imx8mm_evk/imx8mm_evk.c
+++ b/board/freescale/imx8mm_evk/imx8mm_evk.c
@@ -4,6 +4,11 @@
  */
 
 #include <common.h>
+#include <miiphy.h>
+#include <netdev.h>
+
+#include <asm/arch/clock.h>
+#include <asm/io.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -14,8 +19,40 @@ int dram_init(void)
 	return 0;
 }
 
+#if IS_ENABLED(CONFIG_FEC_MXC)
+static int setup_fec(void)
+{
+	struct iomuxc_gpr_base_regs *gpr =
+		(struct iomuxc_gpr_base_regs *)IOMUXC_GPR_BASE_ADDR;
+
+	/* Use 125M anatop REF_CLK1 for ENET1, not from external */
+	clrsetbits_le32(&gpr->gpr[1], 0x2000, 0);
+
+	return 0;
+}
+
+int board_phy_config(struct phy_device *phydev)
+{
+	/* enable rgmii rxc skew and phy mode select to RGMII copper */
+	phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x1f);
+	phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x8);
+
+	phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x00);
+	phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x82ee);
+	phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x05);
+	phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x100);
+
+	if (phydev->drv->config)
+		phydev->drv->config(phydev);
+	return 0;
+}
+#endif
+
 int board_init(void)
 {
+	if (IS_ENABLED(CONFIG_FEC_MXC))
+		setup_fec();
+
 	return 0;
 }
 
diff --git a/configs/imx8mm_evk_defconfig b/configs/imx8mm_evk_defconfig
index 4cbc62fd8f..9bf5c45a87 100644
--- a/configs/imx8mm_evk_defconfig
+++ b/configs/imx8mm_evk_defconfig
@@ -35,6 +35,9 @@ CONFIG_CMD_FUSE=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
 CONFIG_CMD_CACHE=y
 CONFIG_CMD_REGULATOR=y
 CONFIG_CMD_EXT2=y
@@ -62,7 +65,11 @@ CONFIG_DM_MMC=y
 CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_FSL_ESDHC_IMX=y
 CONFIG_PHYLIB=y
+CONFIG_PHY_ATHEROS=y
 CONFIG_DM_ETH=y
+CONFIG_PHY_GIGE=y
+CONFIG_FEC_MXC=y
+CONFIG_MII=y
 CONFIG_PINCTRL=y
 CONFIG_SPL_PINCTRL=y
 CONFIG_PINCTRL_IMX8M=y
diff --git a/include/configs/imx8mm_evk.h b/include/configs/imx8mm_evk.h
index a9d99ec8b7..e0c5f5a626 100644
--- a/include/configs/imx8mm_evk.h
+++ b/include/configs/imx8mm_evk.h
@@ -150,4 +150,12 @@
 
 #define CONFIG_SYS_I2C_SPEED		100000
 
+#define CONFIG_ETHPRIME                 "FEC"
+
+#define CONFIG_FEC_XCV_TYPE             RGMII
+#define CONFIG_FEC_MXC_PHYADDR          0
+#define FEC_QUIRK_ENET_MAC
+
+#define IMX_FEC_BASE			0x30BE0000
+
 #endif
-- 
2.16.4