[U-Boot] [PATCH] ARM: dts: zynq: enablement of coresight topology

[Mathieu Poirier]

Hi Michal,

I was not CC'ed on the original post so I just noticed this today,
hence the late reply.  I don't know if you were looking for feedback
or already picked up the patch but here it is anyway.

On Wed, 9 Oct 2019 at 08:07, Michal Simek <michal.simek at xilinx.com> wrote:
>
> From: Zumeng Chen <zumeng.chen at windriver.com>
>
> This patch is to build the coresight topology structure of zynq-7000
> series according to the docs of coresight and userguide of zynq-7000.
>
> Signed-off-by: Zumeng Chen <zumeng.chen at windriver.com>
> Signed-off-by: Quanyang Wang <quanyang.wang at windriver.com>
> Signed-off-by: Michal Simek <michal.simek at xilinx.com>
> ---
>
>  arch/arm/boot/dts/zynq-7000.dtsi | 158 +++++++++++++++++++++++++++++++
>  1 file changed, 158 insertions(+)
>
> diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi
> index ca6425ad794c..86430ad76fee 100644
> --- a/arch/arm/boot/dts/zynq-7000.dtsi
> +++ b/arch/arm/boot/dts/zynq-7000.dtsi
> @@ -59,6 +59,40 @@
>                 regulator-always-on;
>         };
>
> +       replicator {
> +               compatible = "arm,coresight-static-replicator";
> +               clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
> +               clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
> +
> +               out-ports {
> +                       #address-cells = <1>;
> +                       #size-cells = <0>;
> +
> +                       /* replicator output ports */
> +                       port at 0 {
> +                               reg = <0>;
> +                               replicator_out_port0: endpoint {
> +                                       remote-endpoint = <&tpiu_in_port>;
> +                               };
> +                       };
> +                       port at 1 {
> +                               reg = <1>;
> +                               replicator_out_port1: endpoint {
> +                                       remote-endpoint = <&etb_in_port>;
> +                               };
> +                       };
> +               };
> +               in-ports {
> +                       /* replicator input port */
> +                       port {
> +                               replicator_in_port0: endpoint {
> +                                       slave-mode;

The slave-mode property is no longer required and probably an
oversight since it doesn't appear elsewhere in this patch.

> +                                       remote-endpoint = <&funnel_out_port>;
> +                               };
> +                       };
> +               };
> +       };
> +
>         amba: amba {
>                 compatible = "simple-bus";
>                 #address-cells = <1>;
> @@ -365,5 +399,129 @@
>                         reg = <0xf8005000 0x1000>;
>                         timeout-sec = <10>;
>                 };
> +
> +               etb at f8801000 {
> +                       compatible = "arm,coresight-etb10", "arm,primecell";
> +                       reg = <0xf8801000 0x1000>;
> +                       clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
> +                       clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
> +                       in-ports {
> +                               port {
> +                                       etb_in_port: endpoint {
> +                                               remote-endpoint = <&replicator_out_port1>;
> +                                       };
> +                               };
> +                       };
> +               };
> +
> +               tpiu at f8803000 {
> +                       compatible = "arm,coresight-tpiu", "arm,primecell";
> +                       reg = <0xf8803000 0x1000>;
> +                       clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
> +                       clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
> +                       in-ports {
> +                               port {
> +                                       tpiu_in_port: endpoint {
> +                                               remote-endpoint = <&replicator_out_port0>;
> +                                       };
> +                               };
> +                       };
> +               };
> +
> +               funnel at f8804000 {
> +                       compatible = "arm,coresight-static-funnel", "arm,primecell";
> +                       reg = <0xf8804000 0x1000>;
> +                       clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
> +                       clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
> +
> +                       /* funnel output ports */
> +                       out-ports {
> +                               port {
> +                                       funnel_out_port: endpoint {
> +                                               remote-endpoint =
> +                                                       <&replicator_in_port0>;
> +                                       };
> +                               };
> +                       };
> +
> +                       in-ports {
> +                               #address-cells = <1>;
> +                               #size-cells = <0>;
> +
> +                               /* funnel input ports */
> +                               port at 0 {
> +                                       reg = <0>;
> +                                       funnel0_in_port0: endpoint {
> +                                               remote-endpoint = <&ptm0_out_port>;
> +                                       };
> +                               };
> +
> +                               port at 1 {
> +                                       reg = <1>;
> +                                       funnel0_in_port1: endpoint {
> +                                               remote-endpoint = <&ptm1_out_port>;
> +                                       };
> +                               };
> +
> +                               port at 2 {
> +                                       reg = <2>;
> +                                       funnel0_in_port2: endpoint {
> +                                       };
> +                               };
> +
> +                               port at 3 {
> +                                       reg = <3>;
> +                                       funnel0_in_port3: endpoint {
> +                                               remote-endpoint = <&itm_out_port>;
> +                                       };
> +                               };
> +                               /* The other input ports are not connect to anything */
> +                       };
> +               };
> +
> +               /* ITM is not supported by kernel, only leave device node here */
> +               itm at f8805000 {
> +                       compatible = "arm,coresight-etm3x", "arm,primecell";

If I remember correctly ITM and ETMv3 are quite different - please
remove entirely.

> +                       reg = <0xf8805000 0x1000>;
> +                       clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
> +                       clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
> +                       out-ports {
> +                               port {
> +                                       itm_out_port: endpoint {
> +                                               remote-endpoint = <&funnel0_in_port3>;
> +                                       };
> +                               };
> +                       };
> +               };
> +
> +               ptm at f889c000 {
> +                       compatible = "arm,coresight-etm3x", "arm,primecell";
> +                       reg = <0xf889c000 0x1000>;
> +                       clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
> +                       clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
> +                       cpu = <&cpu0>;
> +                       out-ports {
> +                               port {
> +                                       ptm0_out_port: endpoint {
> +                                               remote-endpoint = <&funnel0_in_port0>;
> +                                       };
> +                               };
> +                       };
> +               };
> +
> +               ptm at f889d000 {
> +                       compatible = "arm,coresight-etm3x", "arm,primecell";
> +                       reg = <0xf889d000 0x1000>;
> +                       clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
> +                       clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
> +                       cpu = <&cpu1>;
> +                       out-ports {
> +                               port {
> +                                       ptm1_out_port: endpoint {
> +                                               remote-endpoint = <&funnel0_in_port1>;
> +                                       };
> +                               };
> +                       };
> +               };

With the above:

Reviewed-by: Mathieu Poirier <mathieu.poirier at linaro.org>

>         };
>  };
> --
> 2.17.1
>