[U-Boot] [PATCH 5/8] riscv: ax25: cache: Add SPL_RISCV_MMODE for SPL

Rick Chen rickchen36 at gmail.com
Thu Oct 31 02:31:27 UTC 2019


Hi Bin

>
> Hi Rick,
>
> On Fri, Oct 25, 2019 at 2:18 PM Andes <uboot at andestech.com> wrote:
> >
> > From: Rick Chen <rick at andestech.com>
> >
> > The mcache_ctl csr only can be manipulated in M mode.
> > Add SPL_RISCV_MMODE for U-Boot SPL to control cache
> > operation.
> >
> > Signed-off-by: Rick Chen <rick at andestech.com>
> > Cc: KC Lin <kclin at andestech.com>
> > Cc: Alan Kao <alankao at andestech.com>
> > ---
> >  arch/riscv/cpu/ax25/cache.c | 60 ++++++++++++++++++++++++++++++++++-----------
> >  1 file changed, 46 insertions(+), 14 deletions(-)
> >
> > diff --git a/arch/riscv/cpu/ax25/cache.c b/arch/riscv/cpu/ax25/cache.c
> > index 41de30c..9437e81 100644
> > --- a/arch/riscv/cpu/ax25/cache.c
> > +++ b/arch/riscv/cpu/ax25/cache.c
> > @@ -11,18 +11,46 @@
> >  #include <asm/csr.h>
> >
> >  #ifdef CONFIG_RISCV_NDS_CACHE
> > +#if defined(CONFIG_RISCV_MMODE) || defined(CONFIG_SPL_RISCV_MMODE)
>
> Use CONFIG_IS_ENABLED(RISCV_MMODE)
>
> >  /* mcctlcommand */
> >  #define CCTL_REG_MCCTLCOMMAND_NUM      0x7cc
> >
> >  /* D-cache operation */
> >  #define CCTL_L1D_WBINVAL_ALL   6
> >  #endif
> > +#endif
> > +
> > +#ifdef CONFIG_V5L2_CACHE
> > +static void _cache_enable(void)
> > +{
> > +       struct udevice *dev = NULL;
> > +
> > +       uclass_find_first_device(UCLASS_CACHE, &dev);
> > +
> > +       if (dev)
> > +               cache_enable(dev);
> > +}
> > +
> > +static void _cache_disable(void)
> > +{
> > +       struct udevice *dev = NULL;
> > +
> > +       uclass_find_first_device(UCLASS_CACHE, &dev);
> > +
> > +       if (dev)
> > +               cache_disable(dev);
> > +}
> > +#endif
> >
> >  void flush_dcache_all(void)
> >  {
> > +#if !CONFIG_IS_ENABLED(SYS_ICACHE_OFF)
> >  #ifdef CONFIG_RISCV_NDS_CACHE
> > +#if defined(CONFIG_RISCV_MMODE) || defined(CONFIG_SPL_RISCV_MMODE)
> >         csr_write(CCTL_REG_MCCTLCOMMAND_NUM, CCTL_L1D_WBINVAL_ALL);
> >  #endif
> > +#endif
> > +#endif
> >  }
> >
> >  void flush_dcache_range(unsigned long start, unsigned long end)
> > @@ -39,6 +67,7 @@ void icache_enable(void)
> >  {
> >  #if !CONFIG_IS_ENABLED(SYS_ICACHE_OFF)
> >  #ifdef CONFIG_RISCV_NDS_CACHE
> > +#if defined(CONFIG_RISCV_MMODE) || defined(CONFIG_SPL_RISCV_MMODE)
> >         asm volatile (
> >                 "csrr t1, mcache_ctl\n\t"
> >                 "ori t0, t1, 0x1\n\t"
> > @@ -46,12 +75,14 @@ void icache_enable(void)
> >         );
> >  #endif
> >  #endif
> > +#endif
> >  }
> >
> >  void icache_disable(void)
> >  {
> >  #if !CONFIG_IS_ENABLED(SYS_ICACHE_OFF)
> >  #ifdef CONFIG_RISCV_NDS_CACHE
> > +#if defined(CONFIG_RISCV_MMODE) || defined(CONFIG_SPL_RISCV_MMODE)
> >         asm volatile (
> >                 "fence.i\n\t"
> >                 "csrr t1, mcache_ctl\n\t"
>
> Could you please add a patch to replace the CSR name with CSR number?
> This way an upstream GCC to build this code without any issue.

Thanks for your suggestions.
But I prefer not modify it in this patchs for SPL.

I will send another patch to modify as your suggestions.

Thanks
Rick

>
> > @@ -60,24 +91,23 @@ void icache_disable(void)
> >         );
> >  #endif
> >  #endif
> > +#endif
> >  }
> >
> >  void dcache_enable(void)
> >  {
> >  #if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF)
> >  #ifdef CONFIG_RISCV_NDS_CACHE
> > -       struct udevice *dev = NULL;
> > -
> > +#if defined(CONFIG_RISCV_MMODE) || defined(CONFIG_SPL_RISCV_MMODE)
> >         asm volatile (
> >                 "csrr t1, mcache_ctl\n\t"
> >                 "ori t0, t1, 0x2\n\t"
> >                 "csrw mcache_ctl, t0\n\t"
> >         );
> > -
> > -       uclass_find_first_device(UCLASS_CACHE, &dev);
> > -
> > -       if (dev)
> > -               cache_enable(dev);
> > +#endif
> > +#ifdef CONFIG_V5L2_CACHE
> > +       _cache_enable();
> > +#endif
> >  #endif
> >  #endif
> >  }
> > @@ -86,19 +116,17 @@ void dcache_disable(void)
> >  {
> >  #if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF)
> >  #ifdef CONFIG_RISCV_NDS_CACHE
> > -       struct udevice *dev = NULL;
> > -
> > +#if defined(CONFIG_RISCV_MMODE) || defined(CONFIG_SPL_RISCV_MMODE)
> >         csr_write(CCTL_REG_MCCTLCOMMAND_NUM, CCTL_L1D_WBINVAL_ALL);
> >         asm volatile (
> >                 "csrr t1, mcache_ctl\n\t"
> >                 "andi t0, t1, ~0x2\n\t"
> >                 "csrw mcache_ctl, t0\n\t"
> >         );
> > -
> > -       uclass_find_first_device(UCLASS_CACHE, &dev);
> > -
> > -       if (dev)
> > -               cache_disable(dev);
> > +#endif
> > +#ifdef CONFIG_V5L2_CACHE
> > +       _cache_disable();
> > +#endif
> >  #endif
> >  #endif
> >  }
> > @@ -108,6 +136,7 @@ int icache_status(void)
> >         int ret = 0;
> >
> >  #ifdef CONFIG_RISCV_NDS_CACHE
> > +#if defined(CONFIG_RISCV_MMODE) || defined(CONFIG_SPL_RISCV_MMODE)
> >         asm volatile (
> >                 "csrr t1, mcache_ctl\n\t"
> >                 "andi   %0, t1, 0x01\n\t"
> > @@ -116,6 +145,7 @@ int icache_status(void)
> >                 : "memory"
> >         );
> >  #endif
> > +#endif
> >
> >         return ret;
> >  }
> > @@ -125,6 +155,7 @@ int dcache_status(void)
> >         int ret = 0;
> >
> >  #ifdef CONFIG_RISCV_NDS_CACHE
> > +#if defined(CONFIG_RISCV_MMODE) || defined(CONFIG_SPL_RISCV_MMODE)
> >         asm volatile (
> >                 "csrr t1, mcache_ctl\n\t"
> >                 "andi   %0, t1, 0x02\n\t"
> > @@ -133,6 +164,7 @@ int dcache_status(void)
> >                 : "memory"
> >         );
> >  #endif
> > +#endif
> >
> >         return ret;
> >  }
> > --
>
> Regards,
> Bin


More information about the U-Boot mailing list