[U-Boot] [PATCH 2/3] stm32mp1: configs: Add CONFIG_SPL_SPI_FLASH_MTD

[Schrempf Frieder]

From: Frieder Schrempf <frieder.schrempf at kontron.de>

As SPI_FLASH_MTD is used in SPL and U-Boot proper, we enable both,
now that a separate option for SPL was introduced.

Signed-off-by: Frieder Schrempf <frieder.schrempf at kontron.de>
---
 configs/stm32mp15_basic_defconfig | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/configs/stm32mp15_basic_defconfig b/configs/stm32mp15_basic_defconfig
index 09785b5dc1..390319657f 100644
--- a/configs/stm32mp15_basic_defconfig
+++ b/configs/stm32mp15_basic_defconfig
@@ -7,10 +7,10 @@ CONFIG_TARGET_STM32MP1=y
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI_SUPPORT=y
 # CONFIG_ARMV7_VIRT is not set
+CONFIG_SPL_TEXT_BASE=0x2FFC2500
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_FIT=y
 CONFIG_BOOTCOMMAND="run bootcmd_stm32mp"
-CONFIG_SPL_TEXT_BASE=0x2FFC2500
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=3
 CONFIG_SPL_I2C_SUPPORT=y
@@ -90,6 +90,7 @@ CONFIG_SPI_FLASH_STMICRO=y
 CONFIG_SPI_FLASH_WINBOND=y
 # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
 CONFIG_SPI_FLASH_MTD=y
+CONFIG_SPL_SPI_FLASH_MTD=y
 CONFIG_DM_ETH=y
 CONFIG_DWC_ETH_QOS=y
 CONFIG_PHY=y
-- 
2.17.1