[U-Boot] [PATCH 2/3] stm32mp1: configs: Add CONFIG_SPL_SPI_FLASH_MTD

[Lukasz Majewski]

On Fri, 13 Sep 2019 22:43:43 +0000
Schrempf Frieder <frieder.schrempf at kontron.de> wrote:

> From: Frieder Schrempf <frieder.schrempf at kontron.de>
> 
> As SPI_FLASH_MTD is used in SPL and U-Boot proper, we enable both,
> now that a separate option for SPL was introduced.
> 
> Signed-off-by: Frieder Schrempf <frieder.schrempf at kontron.de>
> ---
>  configs/stm32mp15_basic_defconfig | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/configs/stm32mp15_basic_defconfig
> b/configs/stm32mp15_basic_defconfig index 09785b5dc1..390319657f
> 100644 --- a/configs/stm32mp15_basic_defconfig
> +++ b/configs/stm32mp15_basic_defconfig
> @@ -7,10 +7,10 @@ CONFIG_TARGET_STM32MP1=y
>  CONFIG_SPL_SPI_FLASH_SUPPORT=y
>  CONFIG_SPL_SPI_SUPPORT=y
>  # CONFIG_ARMV7_VIRT is not set
> +CONFIG_SPL_TEXT_BASE=0x2FFC2500
>  CONFIG_DISTRO_DEFAULTS=y
>  CONFIG_FIT=y
>  CONFIG_BOOTCOMMAND="run bootcmd_stm32mp"
> -CONFIG_SPL_TEXT_BASE=0x2FFC2500
>  CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y
>  CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=3
>  CONFIG_SPL_I2C_SUPPORT=y
> @@ -90,6 +90,7 @@ CONFIG_SPI_FLASH_STMICRO=y
>  CONFIG_SPI_FLASH_WINBOND=y
>  # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
>  CONFIG_SPI_FLASH_MTD=y
> +CONFIG_SPL_SPI_FLASH_MTD=y
>  CONFIG_DM_ETH=y
>  CONFIG_DWC_ETH_QOS=y
>  CONFIG_PHY=y

Reviewed-by: Lukasz Majewski <lukma at denx.de>

Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190916/d02dd70f/attachment.sig>