[U-Boot] [PATCH 2/7] configs: vyasa-rk3288: Fix SPL_TEXT_BASE

[Jagan Teki]

The initial Vyasa-rk3288 TPL implementation is to reuse the
SPL_TEXT_BASE for TPL and SPL as 0x0 and 0xff704000 respectively.

But the below commit implements the reverse way of using TEXT_BASE's
like 0xff704000 for TPL and 0x0 for SPL and which indeed update
the SPL_TEXT_BASE for vyasa-rk3288 board.
"rockchip: Kconfig: enable TPL support for rk3328"
(sha1: 3f47db0275e0f1c1e89d8f13f8b4cdc86b1038ca)

So, fix by dropping the legacy SPL_TEXT_BASE and it will
reassign 0x0 by default based on Kconfig definition.

Reported-by: Jagan Teki <jagan at amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
---
 configs/vyasa-rk3288_defconfig | 1 -
 1 file changed, 1 deletion(-)

diff --git a/configs/vyasa-rk3288_defconfig b/configs/vyasa-rk3288_defconfig
index c74c1457a7..89921e6836 100644
--- a/configs/vyasa-rk3288_defconfig
+++ b/configs/vyasa-rk3288_defconfig
@@ -15,7 +15,6 @@ CONFIG_SILENT_CONSOLE=y
 CONFIG_DEFAULT_FDT_FILE="rk3288-vyasa.dtb"
 # CONFIG_DISPLAY_CPUINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
-CONFIG_SPL_TEXT_BASE=0xff704000
 CONFIG_SPL_STACK_R=y
 CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000
 CONFIG_CMD_GPIO=y
-- 
2.18.0.321.gffc6fa0e3