[U-Boot] [PATCH 2/7] configs: vyasa-rk3288: Fix SPL_TEXT_BASE

[Kever Yang]

On 2019/9/17 下午2:10, Jagan Teki wrote:
> The initial Vyasa-rk3288 TPL implementation is to reuse the
> SPL_TEXT_BASE for TPL and SPL as 0x0 and 0xff704000 respectively.
>
> But the below commit implements the reverse way of using TEXT_BASE's
> like 0xff704000 for TPL and 0x0 for SPL and which indeed update
> the SPL_TEXT_BASE for vyasa-rk3288 board.
> "rockchip: Kconfig: enable TPL support for rk3328"
> (sha1: 3f47db0275e0f1c1e89d8f13f8b4cdc86b1038ca)
>
> So, fix by dropping the legacy SPL_TEXT_BASE and it will
> reassign 0x0 by default based on Kconfig definition.
>
> Reported-by: Jagan Teki <jagan at amarulasolutions.com>
> Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>

Reviewed-by: Kever Yang<kever.yang at rock-chips.com>

Thanks,
- Kever
> ---
>   configs/vyasa-rk3288_defconfig | 1 -
>   1 file changed, 1 deletion(-)
>
> diff --git a/configs/vyasa-rk3288_defconfig b/configs/vyasa-rk3288_defconfig
> index c74c1457a7..89921e6836 100644
> --- a/configs/vyasa-rk3288_defconfig
> +++ b/configs/vyasa-rk3288_defconfig
> @@ -15,7 +15,6 @@ CONFIG_SILENT_CONSOLE=y
>   CONFIG_DEFAULT_FDT_FILE="rk3288-vyasa.dtb"
>   # CONFIG_DISPLAY_CPUINFO is not set
>   CONFIG_DISPLAY_BOARDINFO_LATE=y
> -CONFIG_SPL_TEXT_BASE=0xff704000
>   CONFIG_SPL_STACK_R=y
>   CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000
>   CONFIG_CMD_GPIO=y