[U-Boot] [PATCH] imx: wandboard: convert FEC support to DM_ETH

[Anatolij Gustschin]

Remove CONFIG_DM_ETH conversion warning to avoid board removal.

Signed-off-by: Anatolij Gustschin <agust at denx.de>
---
 arch/arm/dts/imx6qdl-wandboard.dtsi | 10 ++++++++++
 configs/wandboard_defconfig         |  5 ++++-
 include/configs/wandboard.h         |  8 --------
 3 files changed, 14 insertions(+), 9 deletions(-)

diff --git a/arch/arm/dts/imx6qdl-wandboard.dtsi b/arch/arm/dts/imx6qdl-wandboard.dtsi
index 90aa43d21b..35a88bf5a7 100644
--- a/arch/arm/dts/imx6qdl-wandboard.dtsi
+++ b/arch/arm/dts/imx6qdl-wandboard.dtsi
@@ -229,11 +229,21 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy>;
 	phy-reset-gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
 	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
 			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
 	fsl,err006687-workaround-present;
 	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy at 1 {
+			reg = <1>;
+		};
+	};
 };
 
 &spdif {
diff --git a/configs/wandboard_defconfig b/configs/wandboard_defconfig
index 421f80697e..d7eb8fd4b3 100644
--- a/configs/wandboard_defconfig
+++ b/configs/wandboard_defconfig
@@ -12,6 +12,7 @@ CONFIG_SPL=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_CMD_HDMIDETECT=y
 CONFIG_AHCI=y
+CONFIG_SPL_TEXT_BASE=0x00908000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_FIT=y
 CONFIG_SPL_FIT_PRINT=y
@@ -25,7 +26,6 @@ CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_BOUNCE_BUFFER=y
 CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_SPL_TEXT_BASE=0x00908000
 CONFIG_SPL_SEPARATE_BSS=y
 CONFIG_SPL_FIT_IMAGE_TINY=y
 CONFIG_SPL_FS_EXT4=y
@@ -57,6 +57,9 @@ CONFIG_SYS_I2C_MXC_I2C3=y
 CONFIG_DM_MMC=y
 CONFIG_FSL_USDHC=y
 CONFIG_PHYLIB=y
+CONFIG_PHY_ATHEROS=y
+CONFIG_DM_ETH=y
+CONFIG_FEC_MXC=y
 CONFIG_MII=y
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_IMX6=y
diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h
index 8faf5f0f78..a0a78eab27 100644
--- a/include/configs/wandboard.h
+++ b/include/configs/wandboard.h
@@ -40,14 +40,6 @@
 #define CONFIG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS		0
 
-/* Ethernet Configuration */
-#define CONFIG_FEC_MXC
-#define IMX_FEC_BASE			ENET_BASE_ADDR
-#define CONFIG_FEC_XCV_TYPE		RGMII
-#define CONFIG_ETHPRIME			"FEC"
-#define CONFIG_FEC_MXC_PHYADDR		1
-#define CONFIG_PHY_ATHEROS
-
 /* Framebuffer */
 #define CONFIG_VIDEO_BMP_RLE8
 #define CONFIG_SPLASH_SCREEN
-- 
2.17.1