[U-Boot] [PATCH v2] imx: wandboard: convert FEC support to DM_ETH
Anatolij Gustschin
agust at denx.de
Fri Sep 20 20:49:06 UTC 2019
Remove CONFIG_DM_ETH conversion warning to avoid board removal.
Signed-off-by: Anatolij Gustschin <agust at denx.de>
---
Changes in v2:
- drop legacy board_eth_init()
- drop IOMUX_PADS() table for enet pads, these are already in dts
arch/arm/dts/imx6qdl-wandboard.dtsi | 10 ++++++++++
board/wandboard/wandboard.c | 23 +----------------------
configs/wandboard_defconfig | 5 ++++-
include/configs/wandboard.h | 8 --------
4 files changed, 15 insertions(+), 31 deletions(-)
diff --git a/arch/arm/dts/imx6qdl-wandboard.dtsi b/arch/arm/dts/imx6qdl-wandboard.dtsi
index 90aa43d21b..35a88bf5a7 100644
--- a/arch/arm/dts/imx6qdl-wandboard.dtsi
+++ b/arch/arm/dts/imx6qdl-wandboard.dtsi
@@ -229,11 +229,21 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
phy-mode = "rgmii-id";
+ phy-handle = <ðphy>;
phy-reset-gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
<&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
fsl,err006687-workaround-present;
status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy: ethernet-phy at 1 {
+ reg = <1>;
+ };
+ };
};
&spdif {
diff --git a/board/wandboard/wandboard.c b/board/wandboard/wandboard.c
index 69cdf3e9c9..11acbad78b 100644
--- a/board/wandboard/wandboard.c
+++ b/board/wandboard/wandboard.c
@@ -71,21 +71,6 @@ static iomux_v3_cfg_t const uart1_pads[] = {
};
static iomux_v3_cfg_t const enet_pads[] = {
- IOMUX_PADS(PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_RGMII_TXC__RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_RGMII_TD0__RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_RGMII_TD1__RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_RGMII_TD2__RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_RGMII_TD3__RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_RGMII_TX_CTL__RGMII_TX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_ENET_REF_CLK__ENET_TX_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_RGMII_RXC__RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_RGMII_RD0__RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_RGMII_RD1__RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_RGMII_RD2__RGMII_RD2 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_RGMII_RD3__RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL)),
/* AR8031 PHY Reset */
IOMUX_PADS(PAD_EIM_D29__GPIO3_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL)),
};
@@ -358,13 +343,6 @@ static void setup_display(void)
}
#endif /* CONFIG_VIDEO_IPUV3 */
-int board_eth_init(bd_t *bis)
-{
- setup_iomux_enet();
-
- return cpu_eth_init(bis);
-}
-
int board_early_init_f(void)
{
setup_iomux_uart();
@@ -464,6 +442,7 @@ int board_late_init(void)
else
env_set("board_name", "B1");
#endif
+ setup_iomux_enet();
return 0;
}
diff --git a/configs/wandboard_defconfig b/configs/wandboard_defconfig
index 421f80697e..d7eb8fd4b3 100644
--- a/configs/wandboard_defconfig
+++ b/configs/wandboard_defconfig
@@ -12,6 +12,7 @@ CONFIG_SPL=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_CMD_HDMIDETECT=y
CONFIG_AHCI=y
+CONFIG_SPL_TEXT_BASE=0x00908000
CONFIG_DISTRO_DEFAULTS=y
CONFIG_FIT=y
CONFIG_SPL_FIT_PRINT=y
@@ -25,7 +26,6 @@ CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_BOUNCE_BUFFER=y
CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_SPL_TEXT_BASE=0x00908000
CONFIG_SPL_SEPARATE_BSS=y
CONFIG_SPL_FIT_IMAGE_TINY=y
CONFIG_SPL_FS_EXT4=y
@@ -57,6 +57,9 @@ CONFIG_SYS_I2C_MXC_I2C3=y
CONFIG_DM_MMC=y
CONFIG_FSL_USDHC=y
CONFIG_PHYLIB=y
+CONFIG_PHY_ATHEROS=y
+CONFIG_DM_ETH=y
+CONFIG_FEC_MXC=y
CONFIG_MII=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_IMX6=y
diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h
index 8faf5f0f78..a0a78eab27 100644
--- a/include/configs/wandboard.h
+++ b/include/configs/wandboard.h
@@ -40,14 +40,6 @@
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS 0
-/* Ethernet Configuration */
-#define CONFIG_FEC_MXC
-#define IMX_FEC_BASE ENET_BASE_ADDR
-#define CONFIG_FEC_XCV_TYPE RGMII
-#define CONFIG_ETHPRIME "FEC"
-#define CONFIG_FEC_MXC_PHYADDR 1
-#define CONFIG_PHY_ATHEROS
-
/* Framebuffer */
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_SPLASH_SCREEN
--
2.17.1
More information about the U-Boot
mailing list