[U-Boot] rk3288 (Tinkerboard) not booting【请注意，邮件由u-boot-bounces at lists.denx.de代发】

[Jonathan Gray]

On Mon, Sep 23, 2019 at 01:17:40AM +0000, Alexander von Gluck IV wrote:
> Hello!
> 
> There is no uart output and no video with u-boot master.
> The board works as expected booting the Asus Armbian image on an SD.
> 
> At this point i'd be happy to get some u-boot uart output :-)
> 
>  -- Alex

uart output works here with the latest master
(780a17e814503f71d1b51d578b32bc9c89933183)

U-Boot TPL 2019.10-rc3-00401-ge23a6e5c43 (Sep 23 2019 - 15:13:20)
Trying to boot from BOOTROM
Returning to boot ROM...

U-Boot SPL 2019.10-rc3-00401-ge23a6e5c43 (Sep 23 2019 - 15:13:20 +1000)
Trying to boot from MMC1


U-Boot 2019.10-rc3-00401-ge23a6e5c43 (Sep 23 2019 - 15:13:20 +1000)

Model: Tinker-RK3288
DRAM:  2 GiB
MMC:   dwmmc at ff0c0000: 1
Loading Environment from MMC... *** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Model: Tinker-RK3288
rockchip_dnl_key_pressed: adc_channel_single_shot fail!
Net:   eth0: ethernet at ff290000
Hit any key to stop autoboot:  0
switch to partitions #0, OK
mmc1 is current device
Scanning mmc 1:1...
Found EFI removable media binary efi/boot/bootarm.efi
libfdt fdt_check_header(): FDT_ERR_BADMAGIC
Scanning disk dwmmc at ff0c0000.blk...
Found 3 disks
BootOrder not defined
EFI boot manager: Cannot load any image
88176 bytes read in 9 ms (9.3 MiB/s)
libfdt fdt_check_header(): FDT_ERR_BADMAGIC
>> OpenBSD/armv7 BOOTARM 1.6
boot>