[PATCH v4 1/8] mmc: ca_dw_mmc: add DesignWare based DM support for CAxxxx SoCs

[Jaehoon Chung]

Hi,

On 3/31/20 8:51 AM, Alex Nemirovsky wrote:
> From: Arthur Li <arthur.li at cortina-access.com>
> 
> Initial DesignWare based DM support for Cortina Access CAxxxx SoCs.
> 
> Signed-off-by: Arthur Li <arthur.li at cortina-access.com>
> Signed-off-by: Alex Nemirovsky <alex.nemirovsky at cortina-access.com>
> CC: Peng Fan <peng.fan at nxp.com>

It seems that it has already applied to u-boot?
If i missed something, let me know, plz.

Best Regards,
Jaehoon Chung

> 
> ---
> 
> Changes in v4:
> - Rename DT compatible name
> - Remove uneccessary if-statement to support 8-bit buswidth
> - Remove redundant error msg
> - Use symbolic constants in switch statement
> 
> Changes in v3: None
> Changes in v2:
> - Add I2C controller
> - Add LED controller
> - Add SPI NAND and NOR controller
> 
>  MAINTAINERS             |   2 +
>  drivers/mmc/Kconfig     |  11 ++++
>  drivers/mmc/Makefile    |   1 +
>  drivers/mmc/ca_dw_mmc.c | 171 ++++++++++++++++++++++++++++++++++++++++++++++++
>  4 files changed, 185 insertions(+)
>  create mode 100644 drivers/mmc/ca_dw_mmc.c
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 82e4159..bb45d3c 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -180,6 +180,7 @@ F:	board/cortina/common/
>  F:	drivers/gpio/cortina_gpio.c
>  F:	drivers/watchdog/cortina_wdt.c
>  F:	drivers/serial/serial_cortina.c
> +F:	drivers/mmc/ca_dw_mmc.c
>  
>  ARM/CZ.NIC TURRIS MOX SUPPORT
>  M:	Marek Behun <marek.behun at nic.cz>
> @@ -670,6 +671,7 @@ F:	board/cortina/common/
>  F:	drivers/gpio/cortina_gpio.c
>  F:	drivers/watchdog/cortina_wdt.c
>  F:	drivers/serial/serial_cortina.c
> +F:	drivers/mmc/ca_dw_mmc.c
>  
>  MIPS MSCC
>  M:	Gregory CLEMENT <gregory.clement at bootlin.com>
> diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
> index 2f0eedc..bb38787 100644
> --- a/drivers/mmc/Kconfig
> +++ b/drivers/mmc/Kconfig
> @@ -205,6 +205,17 @@ config MMC_DW
>  	  block, this provides host support for SD and MMC interfaces, in both
>  	  PIO, internal DMA mode and external DMA mode.
>  
> +config MMC_DW_CORTINA
> +	bool "Cortina specific extensions for Synopsys DW Memory Card Interface"
> +	depends on DM_MMC
> +	depends on MMC_DW
> +	depends on BLK
> +	default n
> +	help
> +	  This selects support for Cortina SoC specific extensions to the
> +	  Synopsys DesignWare Memory Card Interface driver. Select this option
> +	  for platforms based on Cortina CAxxxx Soc's.
> +
>  config MMC_DW_EXYNOS
>  	bool "Exynos specific extensions for Synopsys DW Memory Card Interface"
>  	depends on ARCH_EXYNOS
> diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile
> index 9c1f8e5..615b724 100644
> --- a/drivers/mmc/Makefile
> +++ b/drivers/mmc/Makefile
> @@ -20,6 +20,7 @@ endif
>  obj-$(CONFIG_ARM_PL180_MMCI) += arm_pl180_mmci.o
>  obj-$(CONFIG_MMC_DAVINCI)		+= davinci_mmc.o
>  obj-$(CONFIG_MMC_DW)			+= dw_mmc.o
> +obj-$(CONFIG_MMC_DW_CORTINA)		+= ca_dw_mmc.o
>  obj-$(CONFIG_MMC_DW_EXYNOS)		+= exynos_dw_mmc.o
>  obj-$(CONFIG_MMC_DW_K3)			+= hi6220_dw_mmc.o
>  obj-$(CONFIG_MMC_DW_ROCKCHIP)		+= rockchip_dw_mmc.o
> diff --git a/drivers/mmc/ca_dw_mmc.c b/drivers/mmc/ca_dw_mmc.c
> new file mode 100644
> index 0000000..198c41f
> --- /dev/null
> +++ b/drivers/mmc/ca_dw_mmc.c
> @@ -0,0 +1,171 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * (C) Copyright 2019 Cortina Access
> + * Arthur Li <arthur.li at cortina-access.com>
> + */
> +
> +#include <common.h>
> +#include <dwmmc.h>
> +#include <fdtdec.h>
> +#include <linux/libfdt.h>
> +#include <malloc.h>
> +#include <errno.h>
> +#include <dm.h>
> +#include <mapmem.h>
> +
> +#define SD_CLK_SEL_MASK (0x3)
> +#define SD_DLL_DEFAULT  (0x143000)
> +#define SD_SCLK_MAX (200000000)
> +
> +#define SD_CLK_SEL_200MHZ (0x2)
> +#define SD_CLK_SEL_100MHZ (0x1)
> +#define SD_CLK_SEL_50MHZ (0x0)
> +
> +#define IO_DRV_SD_DS_OFFSET (16)
> +#define IO_DRV_SD_DS_MASK   (0xff << IO_DRV_SD_DS_OFFSET)
> +
> +#define MIN_FREQ (400000)
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +struct ca_mmc_plat {
> +	struct mmc_config cfg;
> +	struct mmc mmc;
> +};
> +
> +struct ca_dwmmc_priv_data {
> +	struct dwmci_host host;
> +	void __iomem *sd_dll_reg;
> +	void __iomem *io_drv_reg;
> +	u8 ds;
> +};
> +
> +static void ca_dwmci_clksel(struct dwmci_host *host)
> +{
> +	struct ca_dwmmc_priv_data *priv = host->priv;
> +	u32 val = readl(priv->sd_dll_reg);
> +
> +	val &= ~SD_CLK_SEL_MASK;
> +	if (host->bus_hz >= 200000000)
> +		val |= SD_CLK_SEL_200MHZ;
> +	else if (host->bus_hz >= 100000000)
> +		val |= SD_CLK_SEL_100MHZ;
> +
> +	writel(val, priv->sd_dll_reg);
> +}
> +
> +static void ca_dwmci_board_init(struct dwmci_host *host)
> +{
> +	struct ca_dwmmc_priv_data *priv = host->priv;
> +	u32 val = readl(priv->io_drv_reg);
> +
> +	writel(SD_DLL_DEFAULT, priv->sd_dll_reg);
> +
> +	val &= ~IO_DRV_SD_DS_MASK;
> +	if (priv && priv->ds)
> +		val |= priv->ds << IO_DRV_SD_DS_OFFSET;
> +	writel(val, priv->io_drv_reg);
> +}
> +
> +unsigned int ca_dwmci_get_mmc_clock(struct dwmci_host *host, uint freq)
> +{
> +	struct ca_dwmmc_priv_data *priv = host->priv;
> +	u8 sd_clk_sel = readl(priv->sd_dll_reg) & SD_CLK_SEL_MASK;
> +	u8 clk_div;
> +
> +	switch (sd_clk_sel) {
> +	case SD_CLK_SEL_50MHZ:
> +		clk_div = 4;
> +		break;
> +	case SD_CLK_SEL_100MHZ:
> +		clk_div = 2;
> +		break;
> +	default:
> +		clk_div = 1;
> +	}
> +
> +	return SD_SCLK_MAX / clk_div / (host->div + 1);
> +}
> +
> +static int ca_dwmmc_ofdata_to_platdata(struct udevice *dev)
> +{
> +	struct ca_dwmmc_priv_data *priv = dev_get_priv(dev);
> +	struct dwmci_host *host = &priv->host;
> +	u32 tmp;
> +
> +	host->name = dev->name;
> +	host->dev_index = 0;
> +
> +	host->buswidth = dev_read_u32_default(dev, "bus-width", 1);
> +	host->bus_hz = dev_read_u32_default(dev, "max-frequency", 50000000);
> +	priv->ds = dev_read_u32_default(dev, "io_ds", 0x33);
> +	host->fifo_mode = dev_read_bool(dev, "fifo-mode");
> +
> +	dev_read_u32(dev, "sd_dll_ctrl", &tmp);
> +	priv->sd_dll_reg = map_sysmem((uintptr_t)tmp, sizeof(uintptr_t));
> +	if (!priv->sd_dll_reg)
> +		return -EINVAL;
> +
> +	dev_read_u32(dev, "io_drv_ctrl", &tmp);
> +	priv->io_drv_reg = map_sysmem((uintptr_t)tmp, sizeof(uintptr_t));
> +	if (!priv->io_drv_reg)
> +		return -EINVAL;
> +
> +	host->ioaddr = dev_read_addr_ptr(dev);
> +	if (!host->ioaddr)
> +		return -EINVAL;
> +
> +	host->priv = priv;
> +
> +	return 0;
> +}
> +
> +struct dm_mmc_ops ca_dwmci_dm_ops;
> +
> +static int ca_dwmmc_probe(struct udevice *dev)
> +{
> +	struct ca_mmc_plat *plat = dev_get_platdata(dev);
> +	struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
> +	struct ca_dwmmc_priv_data *priv = dev_get_priv(dev);
> +	struct dwmci_host *host = &priv->host;
> +
> +	memcpy(&ca_dwmci_dm_ops, &dm_dwmci_ops, sizeof(struct dm_mmc_ops));
> +
> +	dwmci_setup_cfg(&plat->cfg, host, host->bus_hz, MIN_FREQ);
> +	if (host->buswidth == 1)
> +		(&plat->cfg)->host_caps &= ~(MMC_MODE_8BIT | MMC_MODE_4BIT);
> +
> +	host->mmc = &plat->mmc;
> +	host->mmc->priv = &priv->host;
> +	upriv->mmc = host->mmc;
> +	host->mmc->dev = dev;
> +	host->clksel = ca_dwmci_clksel;
> +	host->board_init = ca_dwmci_board_init;
> +	host->get_mmc_clk = ca_dwmci_get_mmc_clock;
> +
> +	return dwmci_probe(dev);
> +}
> +
> +static int ca_dwmmc_bind(struct udevice *dev)
> +{
> +	struct ca_mmc_plat *plat = dev_get_platdata(dev);
> +
> +	return dwmci_bind(dev, &plat->mmc, &plat->cfg);
> +}
> +
> +static const struct udevice_id ca_dwmmc_ids[] = {
> +	{ .compatible = "cortina,ca-mmc" },
> +	{ }
> +};
> +
> +U_BOOT_DRIVER(ca_dwmmc_drv) = {
> +	.name		= "cortina_dwmmc",
> +	.id		= UCLASS_MMC,
> +	.of_match	= ca_dwmmc_ids,
> +	.ofdata_to_platdata = ca_dwmmc_ofdata_to_platdata,
> +	.bind		= ca_dwmmc_bind,
> +	.ops		= &ca_dwmci_dm_ops,
> +	.probe		= ca_dwmmc_probe,
> +	.priv_auto_alloc_size	= sizeof(struct ca_dwmmc_priv_data),
> +	.platdata_auto_alloc_size = sizeof(struct ca_mmc_plat),
> +};
>