[PATCH v6 02/17] riscv: sifive: fu540: Use OTP DM driver for serial environment variable

Pragnesh Patel pragnesh.patel at sifive.com
Thu Apr 2 11:24:35 CEST 2020


Hi Jagan,

>-----Original Message-----
>From: Jagan Teki <jagan at amarulasolutions.com>
>Sent: 02 April 2020 14:49
>To: Pragnesh Patel <pragnesh.patel at sifive.com>
>Cc: U-Boot-Denx <u-boot at lists.denx.de>; Atish Patra
><atish.patra at wdc.com>; palmerdabbelt at google.com; Bin Meng
><bmeng.cn at gmail.com>; Paul Walmsley <paul.walmsley at sifive.com>; Troy
>Benjegerdes <troy.benjegerdes at sifive.com>; Anup Patel
><anup.patel at wdc.com>; Sagar Kadam <sagar.kadam at sifive.com>; Rick Chen
><rick at andestech.com>; Palmer Dabbelt <palmer at dabbelt.com>
>Subject: Re: [PATCH v6 02/17] riscv: sifive: fu540: Use OTP DM driver for serial
>environment variable
>
>[External Email] Do not click links or attachments unless you recognize the
>sender and know the content is safe
>
>On Sun, Mar 29, 2020 at 10:36 PM Pragnesh Patel
><pragnesh.patel at sifive.com> wrote:
>>
>> Use the OTP DM driver to set the serial environment variable.
>>
>> Signed-off-by: Pragnesh Patel <pragnesh.patel at sifive.com>
>> ---
>>  arch/riscv/dts/fu540-c000-u-boot.dtsi         |  14 +++
>>  .../dts/hifive-unleashed-a00-u-boot.dtsi      |   6 +
>>  board/sifive/fu540/Kconfig                    |   2 +
>>  board/sifive/fu540/fu540.c                    | 111 ++++++------------
>>  4 files changed, 61 insertions(+), 72 deletions(-)  create mode
>> 100644 arch/riscv/dts/fu540-c000-u-boot.dtsi
>>  create mode 100644 arch/riscv/dts/hifive-unleashed-a00-u-boot.dtsi
>>
>> diff --git a/arch/riscv/dts/fu540-c000-u-boot.dtsi
>> b/arch/riscv/dts/fu540-c000-u-boot.dtsi
>> new file mode 100644
>> index 0000000000..db55773bd2
>> --- /dev/null
>> +++ b/arch/riscv/dts/fu540-c000-u-boot.dtsi
>> @@ -0,0 +1,14 @@
>> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
>> +/*
>> + * (C) Copyright 2019 SiFive, Inc
>> + */
>> +
>> +/ {
>> +       soc {
>> +               otp: otp at 10070000 {
>> +                       compatible = "sifive,fu540-c000-otp";
>> +                       reg = <0x0 0x10070000 0x0 0x0FFF>;
>> +                       fuse-count = <0x1000>;
>> +               };
>> +       };
>> +};
>> diff --git a/arch/riscv/dts/hifive-unleashed-a00-u-boot.dtsi
>> b/arch/riscv/dts/hifive-unleashed-a00-u-boot.dtsi
>> new file mode 100644
>> index 0000000000..f1735c1385
>> --- /dev/null
>> +++ b/arch/riscv/dts/hifive-unleashed-a00-u-boot.dtsi
>> @@ -0,0 +1,6 @@
>> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
>> +/*
>> + * Copyright (C) 2019 SiFive, Inc
>> + */
>> +
>> +#include "fu540-c000-u-boot.dtsi"
>> diff --git a/board/sifive/fu540/Kconfig b/board/sifive/fu540/Kconfig
>> index 5ca21474de..900197bbb2 100644
>> --- a/board/sifive/fu540/Kconfig
>> +++ b/board/sifive/fu540/Kconfig
>> @@ -48,5 +48,7 @@ config BOARD_SPECIFIC_OPTIONS # dummy
>>         imply SIFIVE_GPIO
>>         imply CMD_GPIO
>>         imply SMP
>> +       imply MISC
>> +       imply SIFIVE_OTP
>
>Mark this default y if it is SIFIVE.

All other SiFive drivers (SPI_SIFIVE, SIFIVE_GPIO) are enabled by "imply", so I am following the same. I think "imply" will make it default y.
 
>
>Jagan.


More information about the U-Boot mailing list