[PATCH v6 02/17] riscv: sifive: fu540: Use OTP DM driver for serial environment variable

Jagan Teki jagan at amarulasolutions.com
Thu Apr 2 11:29:21 CEST 2020


On Thu, Apr 2, 2020 at 2:54 PM Pragnesh Patel <pragnesh.patel at sifive.com> wrote:
>
>
> Hi Jagan,
>
> >-----Original Message-----
> >From: Jagan Teki <jagan at amarulasolutions.com>
> >Sent: 02 April 2020 14:49
> >To: Pragnesh Patel <pragnesh.patel at sifive.com>
> >Cc: U-Boot-Denx <u-boot at lists.denx.de>; Atish Patra
> ><atish.patra at wdc.com>; palmerdabbelt at google.com; Bin Meng
> ><bmeng.cn at gmail.com>; Paul Walmsley <paul.walmsley at sifive.com>; Troy
> >Benjegerdes <troy.benjegerdes at sifive.com>; Anup Patel
> ><anup.patel at wdc.com>; Sagar Kadam <sagar.kadam at sifive.com>; Rick Chen
> ><rick at andestech.com>; Palmer Dabbelt <palmer at dabbelt.com>
> >Subject: Re: [PATCH v6 02/17] riscv: sifive: fu540: Use OTP DM driver for serial
> >environment variable
> >
> >[External Email] Do not click links or attachments unless you recognize the
> >sender and know the content is safe
> >
> >On Sun, Mar 29, 2020 at 10:36 PM Pragnesh Patel
> ><pragnesh.patel at sifive.com> wrote:
> >>
> >> Use the OTP DM driver to set the serial environment variable.
> >>
> >> Signed-off-by: Pragnesh Patel <pragnesh.patel at sifive.com>
> >> ---
> >>  arch/riscv/dts/fu540-c000-u-boot.dtsi         |  14 +++
> >>  .../dts/hifive-unleashed-a00-u-boot.dtsi      |   6 +
> >>  board/sifive/fu540/Kconfig                    |   2 +
> >>  board/sifive/fu540/fu540.c                    | 111 ++++++------------
> >>  4 files changed, 61 insertions(+), 72 deletions(-)  create mode
> >> 100644 arch/riscv/dts/fu540-c000-u-boot.dtsi
> >>  create mode 100644 arch/riscv/dts/hifive-unleashed-a00-u-boot.dtsi
> >>
> >> diff --git a/arch/riscv/dts/fu540-c000-u-boot.dtsi
> >> b/arch/riscv/dts/fu540-c000-u-boot.dtsi
> >> new file mode 100644
> >> index 0000000000..db55773bd2
> >> --- /dev/null
> >> +++ b/arch/riscv/dts/fu540-c000-u-boot.dtsi
> >> @@ -0,0 +1,14 @@
> >> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> >> +/*
> >> + * (C) Copyright 2019 SiFive, Inc
> >> + */
> >> +
> >> +/ {
> >> +       soc {
> >> +               otp: otp at 10070000 {
> >> +                       compatible = "sifive,fu540-c000-otp";
> >> +                       reg = <0x0 0x10070000 0x0 0x0FFF>;
> >> +                       fuse-count = <0x1000>;
> >> +               };
> >> +       };
> >> +};
> >> diff --git a/arch/riscv/dts/hifive-unleashed-a00-u-boot.dtsi
> >> b/arch/riscv/dts/hifive-unleashed-a00-u-boot.dtsi
> >> new file mode 100644
> >> index 0000000000..f1735c1385
> >> --- /dev/null
> >> +++ b/arch/riscv/dts/hifive-unleashed-a00-u-boot.dtsi
> >> @@ -0,0 +1,6 @@
> >> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> >> +/*
> >> + * Copyright (C) 2019 SiFive, Inc
> >> + */
> >> +
> >> +#include "fu540-c000-u-boot.dtsi"
> >> diff --git a/board/sifive/fu540/Kconfig b/board/sifive/fu540/Kconfig
> >> index 5ca21474de..900197bbb2 100644
> >> --- a/board/sifive/fu540/Kconfig
> >> +++ b/board/sifive/fu540/Kconfig
> >> @@ -48,5 +48,7 @@ config BOARD_SPECIFIC_OPTIONS # dummy
> >>         imply SIFIVE_GPIO
> >>         imply CMD_GPIO
> >>         imply SMP
> >> +       imply MISC
> >> +       imply SIFIVE_OTP
> >
> >Mark this default y if it is SIFIVE.
>
> All other SiFive drivers (SPI_SIFIVE, SIFIVE_GPIO) are enabled by "imply", so I am following the same. I think "imply" will make it default y.

Just mark 'default y' on SIFIVE_OTP area of drivers/misc/Kconfig
depends on SIFIVE SoC would select this driver so-that you no need to
add impy SIFIVE_OTP here.

Jagan.


More information about the U-Boot mailing list