[PATCH v6 00/17] RISC-V SiFive FU540 support SPL

Pragnesh Patel pragnesh.patel at sifive.com
Thu Apr 2 11:42:10 CEST 2020

Hi Jagan,

>-----Original Message-----
>From: Jagan Teki <jagan at amarulasolutions.com>
>Sent: 02 April 2020 14:42
>To: Pragnesh Patel <pragnesh.patel at sifive.com>
>Cc: U-Boot-Denx <u-boot at lists.denx.de>; Atish Patra
><atish.patra at wdc.com>; palmerdabbelt at google.com; Bin Meng
><bmeng.cn at gmail.com>; Paul Walmsley <paul.walmsley at sifive.com>; Troy
>Benjegerdes <troy.benjegerdes at sifive.com>; Anup Patel
><anup.patel at wdc.com>; Sagar Kadam <sagar.kadam at sifive.com>; Rick Chen
><rick at andestech.com>
>Subject: Re: [PATCH v6 00/17] RISC-V SiFive FU540 support SPL
>[External Email] Do not click links or attachments unless you recognize the
>sender and know the content is safe
>On Sun, Mar 29, 2020 at 10:36 PM Pragnesh Patel
><pragnesh.patel at sifive.com> wrote:
>> This series add support for SPL to FU540.U-Boot SPL can boot from
>> L2 LIM (0x0800_0000) and jump to OpenSBI(FW_DYNAMIC firmware) and
>> U-Boot proper from MMC devices.
>> How to test this patch:
>> 1) Go to OpenSBI-dir : make PLATFORM=sifive/fu540 O=build_dir
>> I=install_dir FW_DYNAMIC=y install
>> 2) cp install_dir/platform/sifive/fu540/firmware/fw_dynamic.bin
>> <u-boot-dir>/
>I think setting
>would help to attach the opensbi instead of copying into the source directory.
>Would you please check that.

Yes that will also work, if I need to submit v7 then will update this.


More information about the U-Boot mailing list