[PATCH v6 00/17] RISC-V SiFive FU540 support SPL

[Jagan Teki]

On Thu, Apr 2, 2020 at 3:12 PM Pragnesh Patel <pragnesh.patel at sifive.com> wrote:
>
> Hi Jagan,
>
> >-----Original Message-----
> >From: Jagan Teki <jagan at amarulasolutions.com>
> >Sent: 02 April 2020 14:42
> >To: Pragnesh Patel <pragnesh.patel at sifive.com>
> >Cc: U-Boot-Denx <u-boot at lists.denx.de>; Atish Patra
> ><atish.patra at wdc.com>; palmerdabbelt at google.com; Bin Meng
> ><bmeng.cn at gmail.com>; Paul Walmsley <paul.walmsley at sifive.com>; Troy
> >Benjegerdes <troy.benjegerdes at sifive.com>; Anup Patel
> ><anup.patel at wdc.com>; Sagar Kadam <sagar.kadam at sifive.com>; Rick Chen
> ><rick at andestech.com>
> >Subject: Re: [PATCH v6 00/17] RISC-V SiFive FU540 support SPL
> >
> >[External Email] Do not click links or attachments unless you recognize the
> >sender and know the content is safe
> >
> >On Sun, Mar 29, 2020 at 10:36 PM Pragnesh Patel
> ><pragnesh.patel at sifive.com> wrote:
> >>
> >> This series add support for SPL to FU540.U-Boot SPL can boot from
> >> L2 LIM (0x0800_0000) and jump to OpenSBI(FW_DYNAMIC firmware) and
> >> U-Boot proper from MMC devices.
> >>
> >> How to test this patch:
> >> 1) Go to OpenSBI-dir : make PLATFORM=sifive/fu540 O=build_dir
> >> I=install_dir FW_DYNAMIC=y install
> >> 2) cp install_dir/platform/sifive/fu540/firmware/fw_dynamic.bin
> >> <u-boot-dir>/
> >
> >I think setting
> >OPENSBI=<path/to/opensbi/install_dir/platform/sifive/fu540/firmware/fw_d
> >ynamic.bin>
> >would help to attach the opensbi instead of copying into the source directory.
> >Would you please check that.
>
> Yes that will also work, if I need to submit v7 then will update this.

Thanks, please wait for sometime I'll send my comments for the rest of
the patches.

Jagan.