[PATCH] ARM: dts: stm32: Temporarily drop cd-gpios from AV96 DT

[Marek Vasut]

The card-detect GPIO and any other GPIO access currently doesn't work in
U-Boot SPL on any STM32 platform and crashes the SPL. To work around this
problem on AV96 right before release, remove the cd-gpios from DT. This
patch must be reverted right after release, once the proper fix for the
GPIO driver, "gpio: stm32: support gpio ops in SPL", is applied.

Signed-off-by: Marek Vasut <marex at denx.de>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam at linaro.org>
Cc: Patrick Delaunay <patrick.delaunay at st.com>
Cc: Patrice Chotard <patrice.chotard at st.com>
Cc: Tom Rini <trini at konsulko.com>
---
NOTE: I think it's OK if Tom picks this one directly to reduce load on
      the ST people, since this is isolated to a single board.
---
 arch/arm/dts/stm32mp157a-avenger96.dts | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm/dts/stm32mp157a-avenger96.dts b/arch/arm/dts/stm32mp157a-avenger96.dts
index 1f32395e71..b23fa6dee0 100644
--- a/arch/arm/dts/stm32mp157a-avenger96.dts
+++ b/arch/arm/dts/stm32mp157a-avenger96.dts
@@ -353,7 +353,6 @@
 	pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_b>;
 	pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_dir_pins_b>;
 	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a &sdmmc1_dir_sleep_pins_b>;
-	cd-gpios = <&gpioi 8 GPIO_ACTIVE_LOW>;
 	disable-wp;
 	st,sig-dir;
 	st,neg-edge;
-- 
2.25.1