[PATCH] ARM: dts: stm32: Temporarily drop cd-gpios from AV96 DT

[Manivannan Sadhasivam]

On Thu, Apr 02, 2020 at 06:53:41PM +0200, Marek Vasut wrote:
> The card-detect GPIO and any other GPIO access currently doesn't work in
> U-Boot SPL on any STM32 platform and crashes the SPL. To work around this
> problem on AV96 right before release, remove the cd-gpios from DT. This
> patch must be reverted right after release, once the proper fix for the
> GPIO driver, "gpio: stm32: support gpio ops in SPL", is applied.
> 
> Signed-off-by: Marek Vasut <marex at denx.de>

Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam at linaro.org>

Thanks,
Mani

> Cc: Manivannan Sadhasivam <manivannan.sadhasivam at linaro.org>
> Cc: Patrick Delaunay <patrick.delaunay at st.com>
> Cc: Patrice Chotard <patrice.chotard at st.com>
> Cc: Tom Rini <trini at konsulko.com>
> ---
> NOTE: I think it's OK if Tom picks this one directly to reduce load on
>       the ST people, since this is isolated to a single board.
> ---
>  arch/arm/dts/stm32mp157a-avenger96.dts | 1 -
>  1 file changed, 1 deletion(-)
> 
> diff --git a/arch/arm/dts/stm32mp157a-avenger96.dts b/arch/arm/dts/stm32mp157a-avenger96.dts
> index 1f32395e71..b23fa6dee0 100644
> --- a/arch/arm/dts/stm32mp157a-avenger96.dts
> +++ b/arch/arm/dts/stm32mp157a-avenger96.dts
> @@ -353,7 +353,6 @@
>  	pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_b>;
>  	pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_dir_pins_b>;
>  	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a &sdmmc1_dir_sleep_pins_b>;
> -	cd-gpios = <&gpioi 8 GPIO_ACTIVE_LOW>;
>  	disable-wp;
>  	st,sig-dir;
>  	st,neg-edge;
> -- 
> 2.25.1
>