i.MX8QXP hangs in SPL after a "reboot" command

[Fabio Estevam]

Hi Peng,

On Tue, Apr 7, 2020 at 9:47 PM Peng Fan <peng.fan at nxp.com> wrote:
>
> > Subject: Re: i.MX8QXP hangs in SPL after a "reboot" command
> >
> > On Thu, Apr 2, 2020 at 4:21 PM Fabio Estevam <festevam at gmail.com>
> > wrote:
> >
> > > U-Boot SPL 2020.04-rc4-00061-ge0718b3ab7 (Apr 02 2020 - 16:14:22
> > > -0300) Normal Boot
> > > WDT:   Not found!
> > > Trying to boot from MMC2_2
> > > spl: mmc init failed with error: -70
> > > SPL: failed to boot from all boot devices ### ERROR ### Please RESET
> > > the board ###
>
> Do you enable M4 partition in your image?

I haven't done anything with regards to the M4 partition.

What should I do exactly?

Thanks