i.MX8QXP hangs in SPL after a "reboot" command

Peng Fan peng.fan at nxp.com
Wed Apr 8 04:05:59 CEST 2020


> Subject: Re: i.MX8QXP hangs in SPL after a "reboot" command
> 
> Hi Peng,
> 
> On Tue, Apr 7, 2020 at 9:47 PM Peng Fan <peng.fan at nxp.com> wrote:
> >
> > > Subject: Re: i.MX8QXP hangs in SPL after a "reboot" command
> > >
> > > On Thu, Apr 2, 2020 at 4:21 PM Fabio Estevam <festevam at gmail.com>
> > > wrote:
> > >
> > > > U-Boot SPL 2020.04-rc4-00061-ge0718b3ab7 (Apr 02 2020 - 16:14:22
> > > > -0300) Normal Boot
> > > > WDT:   Not found!
> > > > Trying to boot from MMC2_2
> > > > spl: mmc init failed with error: -70
> > > > SPL: failed to boot from all boot devices ### ERROR ### Please
> > > > RESET the board ###
> >
> > Do you enable M4 partition in your image?
> 
> I haven't done anything with regards to the M4 partition.
> 
> What should I do exactly?

Ok, then I think you not have M4 used.
Which kernel are you using? Which SCFW/SECO?

Regards,
Peng.

> 
> Thanks


More information about the U-Boot mailing list