[RFC PATCH v2 04/13] i2c: add nexell driver

[Heiko Schocher]

Hello Stefan,

Am 28.03.2020 um 10:43 schrieb Stefan Bosch:
> Changes in relation to FriendlyARM's U-Boot nanopi2-v2016.01:
> - i2c/nx_i2c.c: Some adaptions mainly because of changes in
>    "struct udevice".
> - several Bugfixes in nx_i2c.c.
> - the driver has been for s5p6818 only. Code extended appropriately
>    in order s5p4418 is also working.
> - "probe_chip" added.
> 
> Signed-off-by: Stefan Bosch <stefan_b at posteo.net>
> ---
> 
> Changes in v2:
> - commit "i2c: mmc: add nexell driver (gpio, i2c, mmc, pwm)" splitted
>    into separate commits for gpio, i2c, mmc, pwm.
> - several Bugfixes in nx_i2c.c.
> - the i2c-driver has been for s5p6818 only. Code extended approriately
>    in order s5p4418 is also working.
> - "probe_chip" added to the i2c-driver.
> - doc/device-tree-bindings/i2c/nx_i2c.txt added.
> 
>   doc/device-tree-bindings/i2c/nx_i2c.txt |  28 ++
>   drivers/i2c/Kconfig                     |   9 +
>   drivers/i2c/Makefile                    |   1 +
>   drivers/i2c/nx_i2c.c                    | 649 ++++++++++++++++++++++++++++++++
>   4 files changed, 687 insertions(+)
>   create mode 100644 doc/device-tree-bindings/i2c/nx_i2c.txt
>   create mode 100644 drivers/i2c/nx_i2c.c

I do not find this patch in patchwork ...

Thanks for splitting the big patch into several patches.

Reviewed-by: Heiko Schocher <hs at denx.de>

bye,
Heiko
-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-52   Fax: +49-8142-66989-80   Email: hs at denx.de